Sanus Fixed Height Speaker Stands for Sonos Era 100 (WSSE12-W2) User Manual

Introduction

This manual provides comprehensive instructions for the assembly, installation, and maintenance of your Sanus Fixed Height Speaker Stands, specifically designed for the Sonos Era 100 wireless speaker. Please read all instructions carefully before beginning installation to ensure proper setup and safe operation.

Consignes de sécurité

Always follow basic safety precautions when installing and using this product. Keep small parts away from children. Ensure all connections are secure before placing the speaker on the stand. Do not exceed the recommended weight capacity for the speaker stand.

Contenu du colis

Verify that all components are present before assembly. If any parts are missing or damaged, contact Sanus customer support.

Speaker Stand Post (2)
Plaque de base (2)
Speaker Platform (2)
Mounting Hardware for Sonos Era 100
Pieds en caoutchouc (8)
Height-Adjustable Carpet Spikes (8)
Assembly Tool (e.g., Phillips screwdriver)

Configuration et installation

Follow these steps to assemble and install your speaker stands.

Attach Base Plate to Stand Post: Securely fasten the base plate to the bottom of the stand post using the provided screws and assembly tool. Ensure the connection is tight and stable.
Installer une protection de sol : Depending on your flooring, attach either the rubber feet for hard surfaces or the height-adjustable carpet spikes for carpeted areas to the underside of the base plate. Adjust spikes as needed for leveling.
Route Speaker Cable: Before attaching the speaker platform, carefully route the Sonos Era 100 power cable and any other necessary cables through the oversized post of the speaker stand. This integrated cable management system helps maintain a clean and organized appearance.
Attach Speaker Platform: Secure the speaker platform to the top of the stand post using the designated screws.
Mount Sonos Era 100 Speaker: Place your Sonos Era 100 speaker onto the speaker platform. Use the included hardware to securely attach the speaker to the stand, ensuring it is stable and centered.

Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, showing dimensions of 34.4 inches height, 10 inches width, and 12.7 inches depth. — Image: Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, illustrating overall dimensions and a 5-year limited warranty badge.

Close-up of speaker stand bases showing options for rubber feet and height-adjustable carpet spikes. — Image: Detail of the stand bases, highlighting the inclusion of both rubber feet and height-adjustable carpet spikes for various floor types.

Mode d'emploi

These speaker stands are designed to position your Sonos Era 100 speakers at an optimal listening height for an enhanced audio experience.

Placement: Position the speaker stands in your desired listening area, ensuring they are on a stable, level surface.
Optimal Listening: The fixed height of 34.4 inches (87.4 cm) is engineered to provide an ideal acoustic experience for most seating arrangements.

Sanus speaker stand with Sonos Era 100 speaker, emphasizing 'Optimal Listening Height'. — Image: The speaker stand with a Sonos Era 100 speaker, illustrating its optimal listening height.

Close-up of the speaker stand top, showing how it seamlessly integrates with the Sonos Era 100 speaker. — Image : Un gros plan view demonstrating the seamless integration of the speaker stand with the Sonos Era 100 speaker.

Entretien

To ensure the longevity and appearance of your speaker stands, follow these simple maintenance guidelines:

Nettoyage: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp Nettoyez avec un chiffon imbibé de savon doux, puis séchez soigneusement. Évitez les nettoyants abrasifs et les solvants.
Inspection: Vérifiez régulièrement toutes les vis et les fixations pour vous assurer qu'elles restent bien serrées et sécurisées.

Dépannage

Problème	Cause possible	Solution
Le support est bancal ou instable.	Connexions desserrées ; sol inégal.	Tighten all screws. If on carpet, adjust height-adjustable spikes until stable. If on hard floor, ensure rubber feet are properly installed and the surface is level.
Le haut-parleur ne tient pas bien en place.	Modèle de haut-parleur incorrect ; montage incorrect.	Ensure you are using a Sonos Era 100 speaker. Re-check mounting hardware and instructions to ensure correct attachment.
Les câbles sont visibles ou désordonnés.	Cables not routed through the post.	Disassemble the top portion of the stand and re-route cables through the integrated cable management channel in the stand post.

Caractéristiques

Numéro de modèle : WSSE12-W2
Compatibilité: Sonos Era 100 Wireless Speaker
Matériel: Acier allié
Couleur: Blanc
Dimensions du produit (L x l x H) : 12.7" x 10" x 34.4" (32.2 cm x 25.4 cm x 87.4 cm)
Poids de l'article : 17.11 livres (7.78 kg)
Hauteur d'écoute optimale : 34.4 pouces (87.4 cm)
Gestion des câbles: Integrated through-post design
Compatibilité avec les sols : Includes rubber feet for hard floors and height-adjustable carpet spikes for carpeted surfaces.

Informations sur la garantie

Sanus provides a Garantie limitée de 5 ans for these speaker stands. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official Sanus website ou contacter le support client.

Soutien

For further assistance, technical support, or to inquire about replacement parts, please visit the official Sanus website or contact their customer service department. You can find contact information on the Sanus website: www.sanus.com

	Support d'enceinte réglable en hauteur SANUS BSSEA2 pour Sonos Era 100/300 - Manuel d'installation Manuel d'instructions officiel du support d'enceinte réglable en hauteur SANUS BSSEA2, conçu pour les enceintes Sonos Era 100 et Era 300. Comprend les consignes de sécurité, la liste des pièces, les dimensions et un guide d'assemblage étape par étape.
	Support d'enceinte réglable en hauteur SANUS WSSE3A1/WSSE3A2 pour Sonos Era 300™ - Manuel d'instructions Instructions détaillées pour l'assemblage et l'utilisation du support d'enceinte réglable en hauteur SANUS WSSE3A1/WSSE3A2, conçu pour les enceintes Sonos Era 300™. Comprend des consignes de sécurité, une liste des pièces et un guide d'assemblage étape par étape.
	SANUS WSSE1A1/WSSE1A2 Height-Adjustable Speaker Stand for Sonos Era 100 - Instruction Manual This document provides detailed instructions for assembling and using the SANUS WSSE1A1 and WSSE1A2 height-adjustable speaker stands, designed specifically for Sonos Era 100 speakers. It includes essential safety warnings, product dimensions, a list of parts and hardware, step-by-step assembly guidance, and instructions for height adjustment and cable management.
	SANUS WSSE3A1/WSSE3A2 Height-Adjustable Speaker Stand for Sonos Era 300 - Instruction Manual Official instruction manual for the SANUS WSSE3A1/WSSE3A2 height-adjustable speaker stand designed for the Sonos Era 300 speaker. Includes safety information, parts list, dimensions, and step-by-step assembly instructions.
	Manuel d'utilisation des pieds d'enceintes réglables en hauteur SANUS HTBS (paire) Manuel d'instructions complet pour les supports d'enceintes à hauteur réglable SANUS HTBS (paire), détaillant l'installation, les précautions de sécurité, l'identification des pièces et les procédures de montage pour différents types d'enceintes.
	Support de casque SANUS WSHSH1-B2/WSHSH1-W2 pour Sonos Ace - Manuel d'instructions Manuel d'instructions officiel des supports de casque SANUS WSHSH1-B2 et WSHSH1-W2, conçus pour les casques Sonos Ace. Comprend les étapes de montage, les avertissements de sécurité et les détails du produit.

Sanus WSSE12-W2

Sanus Fixed Height Speaker Stands for Sonos Era 100