LOKITHOR J1000

Manuel d'utilisation du démarreur LOKITHOR J1000

Modèle : J1000

1. Produit terminéview

The LOKITHOR J1000 is a powerful and compact 12V jump starter designed for emergency vehicle starting. It features advanced LiFePO4 battery technology, ensuring safety and extended lifespan. This device is capable of delivering 1000A starting current, suitable for gasoline engines up to 6.0L and diesel engines up to 3.0L. It also functions as a portable power bank with 60W two-way fast charging capabilities.

LOKITHOR J1000 Jump Starter connected to a car battery

Image 1.1: The LOKITHOR J1000 Jump Starter in use, connected to a car battery. The display shows battery voltage et statut.

Caractéristiques principales :

2. Contenu de la boîte

À l'ouverture du colis, veuillez vérifier que les éléments suivants sont tous présents :

Contents of the LOKITHOR J1000 Jump Starter box

Image 2.1: A visual representation of all items included in the LOKITHOR J1000 Jump Starter package, including the main unit, jumper cables, cables, and adapter.

3. Configuration et chargement

3.1 Frais initiaux

Before first use, fully charge the LOKITHOR J1000. The device comes with a partial charge, but a full charge ensures optimal performance and readiness for emergencies.

3.2 Charging the J1000

The J1000 supports 60W two-way fast charging via its USB-C port. Use the provided USB-C to USB-C cable and a compatible 60W (or higher) USB-C power adapter (not included) for the fastest charging. Alternatively, you can use the 12V car adapter.

  1. Connect one end of the USB-C cable to the J1000's USB-C input/output port.
  2. Connect the other end of the USB-C cable to a suitable power source (e.g., wall adapter, car adapter).
  3. The display will indicate charging status. A full charge typically takes about 25 minutes with a 60W charger.
LOKITHOR J1000 Jump Starter connected for 60W fast charging

Image 3.1: The LOKITHOR J1000 Jump Starter connected via its USB-C port for 60W fast charging, demonstrating its power bank capabilities for other devices.

4. Mode d'emploi

4.1 Jump Starting a Vehicle (Normal Start)

Use this method when the vehicle battery voltage est au-dessus de 8V.

  1. Ensure the J1000 is sufficiently charged.
  2. Connect the LO-CLAMP-Pro jumper cable harness into the jump starter's port.
  3. Fixez le cl rougeamp à la borne positive (+) de la batterie du véhicule.
  4. Fixez le cl noiramp à la borne négative (-) de la batterie du véhicule.
  5. Observe the J1000's display. Wait for the green light indicator to come on and start flashing, indicating it's ready to start.
  6. Démarrez votre véhicule.
  7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the J1000.

4.2 Jump Starting a Vehicle (Force Start)

Use this method when the vehicle battery voltage is below 8V or if the normal start fails.

  1. Ensure the J1000 is sufficiently charged.
  2. Connect the LO-CLAMP-Pro jumper cable harness into the jump starter's port.
  3. Fixez le cl rougeamp à la borne positive (+) de la batterie du véhicule.
  4. Fixez le cl noiramp à la borne négative (-) de la batterie du véhicule.
  5. Long press the Power Button and the LED Button simultaneously on the J1000. The display will show a specific indicator for force start mode.
  6. Démarrez votre véhicule dans les 30 secondes.
  7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the J1000.
Diagram showing 3 steps for Normal and Force Start procedures

Image 4.1: A visual guide illustrating the three steps for both Normal Start (for batteries above 8V) and Force Start (for batteries below 8V) using the LOKITHOR J1000.

4.3 Utilisation comme batterie externe

The J1000 can charge various electronic devices via its USB-A (18W output) and USB-C (60W two-way) ports.

  1. Connect your device to the appropriate USB-A or USB-C port on the J1000 using a compatible charging cable.
  2. The J1000 will automatically begin charging your device.

Fonction lampe torche LED 4.4

The J1000 includes an integrated LED flashlight with multiple modes.

5. Informations et mesures de sécurité

The LOKITHOR J1000 is equipped with multiple safety features to protect both the user and the vehicle.

Diagram illustrating 9 types of safety protection in LOKITHOR J1000

Image 5.1: A visual breakdown of the 9 types of safety protection integrated into the LOKITHOR J1000's Smart BMS system, including over-voltage, over-current, and reverse-polarity protection.

6. Maintenance et stockage

6.1 Entretien général

6.2 Stockage

The J1000 has an impressive standby time of up to 24 months on a single full charge, making it ideal for long-term storage.

LOKITHOR J1000 Jump Starter showing 24 months standby time

Image 6.1: A graphic illustrating the LOKITHOR J1000's ability to maintain a charge for up to 24 months in standby mode, highlighting its low self-discharge rate.

7. Dépannage

If you encounter issues with your LOKITHOR J1000, refer to the following common problems and solutions:

ProblèmeCause possibleSolution
L'appareil ne s'allume pas.La batterie est complètement déchargée.Charge the J1000 fully before use.
Vehicle does not start (Normal Start).Vol batterie du véhiculetage is too low (<8V) or connection issue.Try the Force Start method. Ensure clampLes câbles sont correctement connectés aux bornes de la batterie.
Green light on display is not flashing.Incorrect connection or battery voltage trop bas.Chèque clamp connections. If battery is very low, use Force Start.
Device is not charging other devices.J1000 battery is low or cable is faulty.Ensure J1000 is charged. Try a different USB cable.
Abnormal Temperature Indicator (on display).Device is too hot or too cold.Allow the device to return to a safe operating temperature range (typically 0°C to 45°C or 32°F to 113°F).

For issues not listed here, please contact LOKITHOR customer service.

8. Spécifications techniques

FonctionnalitéSpécification
ModèleJ1000
Courant de démarrage1000 Amps
Courant de sortie de crête2000 Amps
Type de batterieLiFePO4 (lithium fer phosphate)
Capacité de la batterie8000 mAh
Voltage12 volts
Compatibilité moteurJusqu'à 6.0 L essence, 3.0 L diesel
Entrée de chargeUSB-C (60W Two-Way Fast Charging)
Sortie USBUSB-A (18W), USB-C (60W Two-Way)
Indice de résistance à l'eauIP65
Classement ignifuge94V0
Poids de l'article2.01 livre (environ 910 grammes)
Dimensions du produit9.46 x 4.19 x 2.36 pouces

9. Garantie et support client

9.1 Informations sur la garantie

The LOKITHOR J1000 Jump Starter comes with a 12-month limited warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.

9.2 Service à la clientèle

For any questions, technical support, or warranty claims, please contact LOKITHOR customer service. Our support team is available 24/7 to assist you.

Please refer to the contact information provided on the LOKITHOR official webPour connaître les canaux d'assistance les plus récents, veuillez consulter le site ou votre documentation d'achat.

Documents connexes - J1000

Préview Démarreur LOKITHOR J3250 : sécurité, précautions et garantie
Consignes de sécurité détaillées, précautions d'utilisation, consignes de manipulation et de recyclage, ainsi que conditions de garantie pour l'alimentation de démarrage multifonction LOKITHOR J3250. Apprenez à utiliser et entretenir votre LOKITHOR J3250 en toute sécurité.
Préview Manuel d'utilisation du démarreur de voiture LOKITHOR J401X : Fonctionnement, démarrage, voltmètre, charge et guide des LED
Manuel d'utilisation officiel du démarreur de voiture LOKITHOR J401X. Ce manuel fournit des instructions détaillées sur son fonctionnement, notamment le démarrage d'un véhicule (méthodes normale et forcée), l'utilisation du voltmètre, le chargement de l'appareil via USB-C ou allume-cigare, le chargement de téléphones portables et l'utilisation de la lampe LED. Il contient également la description des interfaces et les consignes de sécurité.
Préview Démarreur de secours LOKITHOR J401 : Sécurité, précautions et garantie
Ce document fournit les instructions de sécurité essentielles, les précautions, les directives de manipulation et de recyclage, ainsi que les informations sur la garantie de l'alimentation de démarrage multifonction et du démarreur de voiture LOKITHOR J401.
Préview LOKITHOR J2250 User Manual: Car Jump Starter Operation and Charging Guide
Comprehensive user manual for the LOKITHOR J2250 car jump starter. Learn how to jumpstart a vehicle, use the voltmeter function, charge the device, charge your phone, and operate the LED light. Includes detailed operational processes and safety instructions.
Préview Manuel d'utilisation du démarreur Lokithor J3250 PRO 12V
Guide complet du démarreur Lokithor J3250 PRO 12V, couvrant les consignes de sécurité, les caractéristiques, les spécifications, le fonctionnement, les codes d'erreur, les avertissements, le recyclage et les informations sur la garantie.
Préview Manuel d'utilisation du démarreur Lokithor JA3000 PRO | Booster de batterie de voiture puissant de 3000 A
Obtenez des instructions détaillées et les spécifications du démarreur Lokithor JA3000 PRO 3000A. Apprenez à démarrer votre voiture en toute sécurité, à utiliser le gonfleur et à comprendre ses fonctionnalités.