1. Produit terminéview
The Inateck FE2016 is a high-performance external enclosure designed for 2.5-inch SATA Solid State Drives (SSDs) and Hard Disk Drives (HDDs). It features USB 3.2 Gen 2 connectivity, offering data transfer speeds up to 6Gbps. The enclosure includes a protective silicone case and an internal shock-absorbing sponge for enhanced drive security and durability.
2. Contenu du colis
Figure 2.1 : Contenu de l'emballage
Veuillez vérifier que tous les articles sont présents dans votre colis :
- 1 × Inateck FE2016 Hard Drive Enclosure
- 1 × USB Data Cable (50 cm)
- 1 × Shock-absorbing Sponge
- 1 × Manuel d'instructions
3. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Modèle | FE2016-BK |
| Lecteurs compatibles | 2.5-inch SATA SSDs/HDDs (7mm/9.5mm thickness) |
| Interface | USB 3.2 Gen 2 (Type-C to Type-A cable included) |
| Taux de transfert de données | Jusqu'à 6 Gbit/s |
| Systèmes d'exploitation pris en charge | Windows 7/8/10/11, Mac OS, Linux |
| Matériel | Silicone (étui) |
| Dimensions | 13.11 x 8.61 x 1.8 cm |
| Poids | 109 g |
| Caractéristiques | UASP, TRIM, Shock-absorbent, Tool-free installation |
4. Guide d'installation
4.1 Compatibilité des lecteurs
Figure 4.1: Compatible Drive Types
The Inateck FE2016 enclosure supports 2.5-inch SATA SSDs and HDDs with a thickness of either 7mm or 9.5mm. Ensure your drive meets these specifications before installation.
4.2 Installing Your Drive
Figure 4.2 : Installation du lecteur
- Gently slide open the top cover of the Inateck FE2016 enclosure.
- Connect your 2.5-inch SATA SSD or HDD to the internal SATA connector within the enclosure. Ensure the connection is firm and secure.
- Place the included shock-absorbing sponge on top of the drive to prevent movement and provide additional protection.
- Slide the top cover back into place until it clicks, securing the drive within the enclosure.
5. Fonctionnement
5.1 Connexion à votre ordinateur
Figure 5.1 : Compatibilité du système d'exploitation
After installing your drive, connect the Inateck FE2016 enclosure to your computer using the provided USB data cable. The enclosure is plug-and-play and compatible with Windows 7/8/10/11, Mac OS, and Linux operating systems without requiring any additional driver installation.
For new drives, you may need to initialize and format the drive through your operating system's disk management utility before it appears in your file explorateur.
5.2 Data Transfer Performance
Figure 5.2: USB 3.2 Gen 2 Speed Comparison
The enclosure utilizes the USB 3.2 Gen 2 protocol, enabling data transfer speeds of up to 6Gbps. For optimal performance, ensure your computer's USB port also supports USB 3.2 Gen 2. The UASP (USB Attached SCSI Protocol) and TRIM functions further optimize transfer efficiency and contribute to the longevity of your SSDs.
Note: Only SSDs can deliver data rates up to 6Gbps. Traditional HDDs will operate at their maximum mechanical speed.
6. Entretien et protection
6.1 Dual-Layer Protection
Figure 6.1: Dual-Layer Protection Design
The Inateck FE2016 is engineered with dual-layer protection to safeguard your valuable data. This includes a robust external silicone case and an internal shock-absorbing sponge. The silicone case provides a protective barrier against external impacts and prevents scratches on surfaces.
Figure 6.2: Protective Silicone Case in Use
The silicone case is designed to be shock-absorbent and drop-resistant, minimizing the risk of damage from accidental drops. Its soft texture also ensures that the enclosure will not scratch your laptop or other devices when placed nearby.
6.2 Nettoyage
To clean the enclosure, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the surface or silicone case.
7. Dépannage
- Lecteur non détecté :
- Ensure the drive is properly seated in the enclosure and the SATA connector is firm.
- Essayez de connecter le boîtier à un autre port USB de votre ordinateur.
- Verify the USB cable is securely connected at both ends.
- Check your computer's Disk Management (Windows) or Disk Utility (Mac OS) to see if the drive is recognized but uninitialized or unformatted.
- Test the enclosure with a different 2.5-inch SATA drive, if available, to rule out a drive issue.
- Vitesses de transfert lentes :
- Ensure you are connected to a USB 3.2 Gen 2 (or at least USB 3.0) port on your computer. Older USB 2.0 ports will limit speeds.
- Verify the drive itself is capable of high speeds (SSDs generally perform faster than HDDs).
- Évitez de transférer de nombreux petits montants. filesimultanément, car cela peut réduire les taux de transfert globaux.
- Enclosure feels loose or drive rattles:
- Ensure the shock-absorbing sponge is correctly placed on top of the drive inside the enclosure.
- Confirm the enclosure cover is fully closed and latched.
8. Garantie et assistance
Inateck products come with a standard manufacturer's warranty. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Inateck webVeuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
For further assistance, you may contact Inateck customer support through their official channels.
