1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Brandmotion Wireless Observation IR Camera System with a 7-inch HD Monitor (Model AHDS-7810V2). This system is designed to enhance visibility and security for various vehicles, including RAM 1500 (09-2018) and Heavy Duty (2010-Current) trucks, as well as RVs and trailers. It features a wireless camera, a 7-inch HD monitor with DVR capabilities, and infrared night vision for clear viewde jour comme de nuit.
2. Contenu du colis
Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :
- 7-inch HD DVR Monitor
- Wireless HD Observation Camera
- Support à ventouse pour écran
- Monitor Dashboard Mount
- Support de montage pour caméra
- DC Power Cable for Monitor (Cigarette Lighter Adapter)
- DC Power Cable for Camera
- Antennas (for Monitor and Camera)
- Matériel de montage (vis, etc.)
Figure 2.1 : All components included in the Brandmotion AHDS-7810V2 Wireless HD Observation System, including the 7-inch monitor, wireless camera, various mounting brackets, power cables, and antennas.
3. Configuration et installation
3.1 Installation du moniteur
- Choose a suitable location for the 7-inch HD monitor on your vehicle's windshield or dashboard that does not obstruct your view ou interférer avec les airbags.
- Attach the suction cup mount or dashboard mount to the monitor.
- Secure the monitor to the chosen surface. Ensure the mount is firmly attached.
- Connect the DC power cable to the monitor and plug the other end into your vehicle's 12V accessory outlet (cigarette lighter).
- Attach the antenna to the designated port on the monitor.
3.2 Installation de la caméra
- Select a mounting location for the wireless camera that provides the desired field of view, typically at the rear of the vehicle or trailer. Ensure the location allows for a clear line of sight for wireless transmission if possible.
- Use the provided camera mounting bracket and hardware to securely attach the camera. You may need to drill pilot holes.
- Adjust the camera's swivel head to achieve the optimal viewangle de vue.
- Connect the DC power cable to the camera. This cable typically connects to a 12V power source on your vehicle (e.g., reverse lights for a backup camera function, or constant power for continuous observation).
- Fixez l'antenne au port prévu à cet effet sur la caméra.
Figure 3.1 : The wireless camera positioned next to the 7-inch HD monitor, illustrating the compact design of the observation system.
3.3 Appariement initial (si nécessaire)
The camera and monitor are typically pre-paired from the factory. If they do not connect automatically, refer to the 'MENU' options on the monitor to initiate a pairing process. Ensure both devices are powered on and within range (up to 80 feet for a reliable connection).
4. Mode d'emploi
4.1 Mise sous/hors tension
Once connected to power, the monitor should power on automatically or by pressing the power button. To power off, press and hold the power button.
4.2 Contrôles du moniteur
Le moniteur comporte plusieurs boutons de navigation et de contrôle :
- CAME: Switches between connected cameras (supports up to 4 cameras).
- M E N U: Accesses system settings, including pairing, display options, and recording settings.
- - / +: Navigates menu options or adjusts settings (e.g., brightness, volume).
- ENTRER: Confirme les sélections effectuées dans le menu.
- CARTE: Accesses recorded footage or initiates recording.
4.3 ViewModes d'ingénierie
The monitor can display video from a single camera or multiple cameras simultaneously in a split-screen view. Use the 'CAM' button to cycle through available camera views.
Figure 4.1 : The 7-inch HD monitor shows a split-screen view from multiple cameras, illustrating the system's capability to display various angles simultaneously.
4.4 Fonctionnalité d'enregistrement
Le moniteur inclut une fonction DVR, vous permettant d'enregistrer des vidéos.tage. Insert a microSD card (up to 128GB, not included) into the designated slot. Refer to the 'MENU' for recording settings such as continuous recording, loop recording, and motion detection.
Figure 4.2 : The system supports continuous recording to enhance security, capturing footage from multiple cameras.
Vision nocturne infrarouge 4.5
The camera is equipped with infrared (IR) LEDs to provide clear visibility in low-light conditions or complete darkness.
5. Entretien
5.1 Nettoyage
To clean the monitor screen and camera lens, use a soft, lint-free cloth. For stubborn dirt, dampen the cloth with water or a mild, non-abrasive cleaning solution. Avoid harsh chemicals that could damage the surfaces.
5.2 Protection contre les intempéries
The wireless camera features an IP65 international protection rating, indicating it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for outdoor use in various weather conditions.
Figure 5.1 : The wireless camera features a waterproof casing, providing protection against environmental elements for enhanced durability.
6. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Aucune image sur le moniteur | Power issue, camera/monitor not paired, out of range, antenna not connected. | Check power connections. Ensure both camera and monitor are powered on. Re-pair devices via monitor menu. Ensure devices are within 80ft range and antennas are securely attached. |
| Image flickering or poor quality | Weak wireless signal, interference, low battery (if applicable). | Reduce distance between camera and monitor. Check for sources of interference (e.g., other wireless devices). Ensure stable power supply. |
| L'enregistrement ne fonctionne pas. | No microSD card, card full, card not formatted, recording settings incorrect. | Insert a compatible microSD card (up to 128GB). Format the card via monitor menu. Check recording settings. |
| Monitor mount not secure | Surface not clean, suction cup not properly engaged. | Clean the mounting surface thoroughly. Ensure the suction cup lever is fully engaged. Consider using the dashboard mount for a more permanent solution. |
| Installation screws too long/holes too small | Incompatibility with specific vehicle mounting points. | Use appropriate drill bits to enlarge holes if necessary, or acquire shorter screws suitable for your specific application. |
7. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Nom du modèle | AHDS-7810V2 |
| Taille de l'écran | 7 pouces |
| Résolution de capture vidéo | 1080p |
| Fréquence d'images | 30 images par seconde |
| Technologie de connectivité | Wi-Fi (sans fil) |
| Portée de communication sans fil | Up to 80 feet (reliable connection) |
| Nombre de canaux | 4 (prend en charge jusqu'à 4 caméras) |
| Source d'énergie | CC (4 volts, 3 watts) |
| Camera Light Source Type | Infrarouge |
| Camera International Protection Rating | IP65 (Étanchéité à la poussière, protection contre les jets d'eau) |
| Prise en charge du stockage | MicroSD card up to 128GB (for DVR) |
| Matériel | Plastique |
| Dimensions du produit (L x l x H) | 3.5 x 8.5 x 12 pouces |
| Poids de l'article | 3.07 livres |
8. Garantie et assistance
8.1 Informations sur la garantie
The Brandmotion Wireless Observation IR Camera System (AHDS-7810V2) comes with a Garantie de 2 ans À compter de la date d'achat. Cette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
8.2 Assistance clientèle
For technical assistance, troubleshooting, or warranty inquiries, please contact Brandmotion's US-based support team. Detailed contact information can be found on the official Brandmotion websur le site ou auprès de votre détaillant.
Visite www.brandmotion.com pour plus d’informations et de ressources d’assistance.
