1. Introduction
This manual provides instructions for the safe and efficient use of your Displays2go D2G52039 Battery-Powered LED Display Case Accent Lights. These lights are designed to illuminate display cases, curio cabinets, and retail showcases, highlighting items with 120-lumen white LED light. Please read this manual thoroughly before use and retain it for future reference.
2. Contenu du colis
- (2) Displays2go D2G52039 Display Case Accent Lights (Silver)
- Manuel d'utilisation
Note: 3 AAA batteries per light are required and not included.
3. Consignes de sécurité
- Ne mélangez pas des piles neuves et usagées.
- Ne mélangez pas des piles alcalines, standard (carbone-zinc) ou rechargeables (nickel-cadmium).
- Insérez les piles en respectant la polarité (+ et -).
- Retirez les piles si le produit n'est pas utilisé pendant une période prolongée.
- Gardez les piles hors de portée des enfants.
- Do not expose the lights to water or excessive moisture. This product is for indoor use only.
- Do not attempt to disassemble or modify the lights.
4. Installation
4.1 Installation de la batterie
- Locate the battery compartment cover on the underside of the light base.
- Twist or slide the cover to open the compartment.
- Insert three (3) AAA batteries into the compartment, ensuring correct polarity (+ and -) as indicated inside.
- Replacez soigneusement le couvercle du compartiment à piles.
Figure 1: Underside of the light base, indicating the battery compartment for AAA batteries.
4.2 Placement
Place the accent lights on a flat, stable surface within your display case or desired area. The light head is adjustable, allowing you to tilt it to direct the light beam onto specific items.
Figure 2: The accent light with its adjustable head, ready for placement.
Figure 3 : Example of accent lights used within a display case to highlight various items.
5. Mode d'emploi
Each accent light features a simple on/off switch located on its base.
- To turn the light ON, press the "I" side of the rocker switch.
- To turn the light OFF, press the "O" side of the rocker switch.
Figure 4 : Gros plan view of the rocker switch for turning the light on or off.
6. Entretien
6.1 Nettoyage
Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.
6.2 Remplacement de la batterie
When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps in Section 4.1 to replace the three (3) AAA batteries. Dispose of used batteries responsibly according to local regulations.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas. | Les piles sont épuisées ou mal installées. | Vérifiez la polarité des piles. Remplacez-les par des piles AAA neuves. |
| La lumière est faible. | Les piles sont faibles. | Remplacez-les par des piles AAA neuves. |
| La lumière clignote. | Connexion de batterie desserrée ou batteries faibles. | Ensure batteries are securely seated. Replace with fresh AAA batteries. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | D2G52039 |
| Marque | Affiche2go |
| Type de lumière | DIRIGÉ |
| Rendement lumineux | 120 lumens |
| Température de couleur | 6000-6500K (lumière blanche) |
| Source d'énergie | 3 piles AAA (non incluses) |
| Quoitage | 1W |
| Voltage | 3.7V |
| Matériel | Aluminium |
| Couleur | Argent |
| Dimensions (hors tout) | 3.0" L x 3.0" l x 3.9" H |
| Poids (chacun) | 0.28 lb (environ 4.5 onces) |
| Caractéristiques | Tilting head, Portable, Touch switch |
| Utilisation intérieure/extérieure | Uniquement en intérieur |
9. Garantie et assistance
For warranty information or technical support, please contact Displays2go customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can also visit the official Displays2go website pour des ressources supplémentaires et des informations de soutien.
