Manuel d'utilisation du démarreur LOKITHOR J3250 PRO

Modèle : J3250 PRO

1. Introduction

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Consignes de sécurité

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Protection des yeux : Portez toujours des lunettes de sécurité lorsque vous manipulez des batteries.
Ventilation: Utilisez l'appareil dans un endroit bien aéré.
Enfants: Gardez l’appareil hors de portée des enfants.
Courts-circuits : Ne pas autoriser le cl rouge et noiramps'entre-toucher ou toucher le même objet métallique.
Polarité inversée : Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
Humidité: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
Dommage: Do not use the device if it is damaged. Contact customer support for assistance.
Température: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

LOKITHOR J3250 PRO with safety icons including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temp, high-temp, over-voltage, over-load, over-charge, and over-current protection.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Produit terminéview

3.1 Contenu de la boîte

LOKITHOR J3250 PRO Jump Starter Unit
Jumper Starter Clamps
Câble USB-A vers USB-C
Câble USB-C vers USB-C
Adaptateur 12V
Sac de rangement pour accessoires
Manuel d'utilisation

Contents of the LOKITHOR J3250 PRO box, including the jump starter unit, jumper cables, USB-A to USB-C cable, USB-C to USB-C cable, 12V adapter, storage bag, and manual.

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Principales caractéristiques

High Starting Current: Livraison de 3250 Amp peak current for reliable vehicle starting.
Compatibilité moteur : Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
LiFePO4 Battery Technology: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
Sécurité avancée : Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
Charge rapide bidirectionnelle de 100 W : Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
Banque d'alimentation portable : Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
Conception durable : IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
Long temps d'attente: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

LOKITHOR J3250 PRO jump starter connected to a car battery, displaying 12 Volts, 3250A Peak, 50 Starts, 9.5L Gas, and 7.5L Diesel capabilities.

The J3250 PRO provides 3250A peak current, suitable for large engines.

LOKITHOR J3250 PRO jump starter being splashed with water and covered in dust, illustrating its IP65 waterproof and dustproof design.

The device features an IP65 rating for water and dust resistance.

4. Configuration et chargement

4.1 Charge initiale

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Mode d'emploi

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

Attacher Clamps: Connectez le rouge (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp à la borne négative de la batterie du véhicule.
Mise sous tension : Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
Démarrer le véhicule : Démarrez votre véhicule.
Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps de la batterie du véhicule.

Four-step diagram showing how to jump start a car in normal mode: attach clamps, power on, start vehicle, power off and detach.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

Attacher la clé rougeamp: Connectez le rouge (+) clamp à la borne positive de la batterie du véhicule.
Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
Attacher le Cl noiramp: Connectez le noir (-) clamp à la borne négative de la batterie du véhicule.
Démarrer le véhicule : Start your vehicle within 30 seconds of activating Boost Mode.
Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps de la batterie du véhicule.

Five-step diagram showing how to jump start a car in boost mode: attach red clamp, long press boost button, attach black clamp, start vehicle, power off and detach.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Utilisation comme batterie externe portable

The J3250 PRO can charge various electronic devices.

Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
L'appareil commencera automatiquement à se charger.

LOKITHOR J3250 PRO acting as a power bank, charging a smartphone, smartwatch, and tablet via its USB-A and USB-C ports.

The J3250 PRO can charge multiple electronic devices.

5.4 Utilisation de la lampe de poche à LED

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

Appuyez une fois sur le bouton de la lampe torche pour un éclairage continu.
Press again to cycle through Strobe and SOS modes.
Appuyez une quatrième fois pour éteindre la lampe de poche.

The LOKITHOR J3250 PRO's 400-lumen LED flashlight illuminating the words SOS, Strobe, and Flashlight.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Entretien

Rechargez régulièrement : To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
Stockage: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
Nettoyage: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
Clamp Soins: Assurer la clamps are clean and free of corrosion for optimal connection.

LOKITHOR J3250 PRO jump starter stored in a car trunk, with an icon indicating '42 Months Ultra-Long Standby Time'.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Dépannage

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

L'appareil ne s'allume pas : Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
Vehicle Not Starting (Normal Mode):
- Vérifiez que le clampLes câbles sont solidement connectés aux bornes de batterie appropriées (rouge au positif, noir au négatif).
- Ensure the vehicle battery terminals are clean and free of corrosion.
- If the vehicle battery is completely dead, try using Mode Boost.
Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
Surchauffe de l'appareil : The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
Problèmes de charge : Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Spécifications

Fonctionnalité	Spécification
Modèle	J3250 PRO
Culminer Amprage	3250 Amps
Compatibilité moteur (essence)	Jusqu'à 9.5 litres
Compatibilité moteur (diesel)	Jusqu'à 7.5 litres
Type de batterie	LiFePO4 (lithium fer phosphate)
Durée de vie de la batterie	2000+ Cycles (at 100% DoD)
Entrée de charge	USB-C PD 100W (5-20V/5A)
Sortie USB-C	100 W (20 V/5 A)
Sortie USB-A	18W QC (12V/1.5A)
Sortie DC	12 V/10 A
Luminosité de la lampe de poche	400 lumens
Dimensions	10.67 x 3.78 x 8.34 pouces
Poids	6.39 livres
Température de fonctionnement	-4°F à 140°F (-20°C à 60°C)
Indice de protection IP	IP65 (Étanchéité à l'eau et à la poussière)
Temps de veille	Jusqu'à 42 mois

LOKITHOR J3250 PRO jump starter shown in a desert environment at 140°F and a snowy environment at -4°F, demonstrating its wide operating temperature range.

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Garantie et assistance

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webConsultez leur site web ou contactez directement leur service client. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.

If you have any after-sales questions, please feel free to contact us.

	Manuel d'utilisation du démarreur Lokithor J3250 PRO 12V Guide complet du démarreur Lokithor J3250 PRO 12V, couvrant les consignes de sécurité, les caractéristiques, les spécifications, le fonctionnement, les codes d'erreur, les avertissements, le recyclage et les informations sur la garantie.
	Démarreur LOKITHOR J3250 : sécurité, précautions et garantie Consignes de sécurité détaillées, précautions d'utilisation, consignes de manipulation et de recyclage, ainsi que conditions de garantie pour l'alimentation de démarrage multifonction LOKITHOR J3250. Apprenez à utiliser et entretenir votre LOKITHOR J3250 en toute sécurité.
	Informations de sécurité, précautions et garantie du LOKITHOR J2250 Consignes de sécurité complètes, précautions, directives de manipulation et de recyclage, ainsi que détails de la garantie pour l'alimentation de démarrage multifonction LOKITHOR J2250.
	Informations de sécurité et guide d'utilisation du LOKITHOR JA400 Informations complètes sur la sécurité et les consignes d'utilisation du démarreur d'urgence multifonction pour véhicules LOKITHOR JA400, y compris les instructions d'utilisation, les avertissements et la politique de garantie.
	Démarreur de secours LOKITHOR J401 : Sécurité, précautions et garantie Ce document fournit les instructions de sécurité essentielles, les précautions, les directives de manipulation et de recyclage, ainsi que les informations sur la garantie de l'alimentation de démarrage multifonction et du démarreur de voiture LOKITHOR J401.
	Manuel d'utilisation du démarreur de voiture LOKITHOR J401X : Fonctionnement, démarrage, voltmètre, charge et guide des LED Manuel d'utilisation officiel du démarreur de voiture LOKITHOR J401X. Ce manuel fournit des instructions détaillées sur son fonctionnement, notamment le démarrage d'un véhicule (méthodes normale et forcée), l'utilisation du voltmètre, le chargement de l'appareil via USB-C ou allume-cigare, le chargement de téléphones portables et l'utilisation de la lampe LED. Il contient également la description des interfaces et les consignes de sécurité.

LOKITHOR J3250 PRO