1. Introduction
The Luraco Pro-35K Nail Drill is a professional-grade e-file machine designed for precision nail care. It features a true brushless motor for extended life and smooth operation, offering speeds up to 35,000 RPM. This cordless and rechargeable unit provides up to 10 hours of operation on a single charge, making it ideal for both salon and mobile use. Its lightweight and compact design, combined with durable stainless-steel and aluminum components, ensure reliability and ease of use.
Caractéristiques principales :
- True Brushless motor for super long life and smooth operation.
- High speed up to 35,000 RPM with high torque.
- Cordless and rechargeable design with up to 10 hours of battery life.
- Variable speed control for precise adjustments.
- Léger et compact pour la portabilité.
- Low vibration and low noise for a comfortable experience.
- Durable Stainless-steel & Aluminum handpiece.
- Forward & Reverse control for versatile use.
- Smart overload protection to prevent damage.
- 1-hour auto shutoff timer for safety and power saving.
- Built-in cradle for convenient storage.
- Vol universeltage (110V/60Hz to 240V/50Hz) for worldwide compatibility.
2. Produit terminéview
Figure 2.1: The Luraco Pro-35K Nail Drill in Ocean Blue, showcasing the control unit and handpiece.
The Luraco Pro-35K is available in several colors, including Ocean Blue, Navy Sapphire, Metallic Silver, and Purple Wave. Each unit consists of a main control box and a connected handpiece.
Figure 2.2 : Face avant view of the Luraco Pro-35K control unit, displaying the speed dial, battery indicator, forward/reverse switch, and drill connection port.
Figure 2.3 : Détaillé view of the Luraco Pro-35K handpiece, highlighting its durable stainless-steel and aluminum construction.
3. Installation
3.1 Chargement de l'appareil
Before initial use, fully charge the Luraco Pro-35K unit. Connect the power adapter to the charging port on the back of the control unit and plug it into a suitable electrical outlet. The battery indicator lights will show the charging status. A full charge can provide up to 10 hours of operation.
Figure 3.1 : Arrière view of the Luraco Pro-35K control unit, showing the charging port.
3.2 Connecting the Handpiece
Ensure the control unit is turned off before connecting the handpiece. Align the connector of the handpiece cable with the designated port on the front of the control unit and push firmly until it clicks into place. The handpiece can be stored in the built-in cradle when not in use.
3.3 Insertion/Changement des forets
To insert a drill bit, ensure the handpiece is locked (refer to handpiece instructions for specific locking mechanism). Insert the desired bit into the chuck until it is fully seated. Twist the locking mechanism to secure the bit. To remove, unlock the handpiece and pull the bit out. Always ensure bits are securely fastened before operation.
4. Mode d'emploi
4.1 Mise sous/hors tension
To power on the unit, press and hold the power button until the display illuminates. To power off, press and hold the power button again. The unit also features a 1-hour auto shutoff timer for safety and battery conservation.
4.2 Réglage de la vitesse
Use the variable speed control dial on the front of the control unit to adjust the RPM. Rotate clockwise to increase speed (up to 35,000 RPM) and counter-clockwise to decrease speed. Start with a lower speed and gradually increase as needed for the task.
4.3 Forward & Reverse Control
The unit features a switch for Forward (FW) and Reverse (REV) rotation, with a neutral (N) position in between. Always switch to the neutral position before changing direction to prevent damage to the motor. Select the appropriate direction based on the nail technique being performed.
4.4 Smart Overload Protection
The Luraco Pro-35K is equipped with smart overload protection. If excessive pressure is applied or the motor is strained, the unit will automatically reduce power or shut down to prevent damage. Reduce pressure or clear any obstruction, then restart if necessary.
5. Maintenance et entretien
5.1 Nettoyage
- Unité de contrôle: Wipe the control unit with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Pièce à main: After each use, remove the drill bit and clean the handpiece exterior with a soft cloth. Periodically, use a small brush to remove dust and debris from the chuck area. Do not immerse the handpiece in liquid.
- Forets : Clean and sanitize drill bits according to manufacturer instructions after each client.
5.2 Stockage
Store the Luraco Pro-35K in a cool, dry place away from direct sunlight and extreme temperatures. Use the built-in cradle for the handpiece to prevent damage. Ensure the unit is turned off before storing.
6. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| L'unité ne s'allume pas. | Batterie faible ou appareil non chargé. | Connect to power adapter and charge fully. Ensure power button is pressed and held. |
| Handpiece not rotating. | Handpiece not properly connected or bit not secured. | Check handpiece connection. Ensure drill bit is correctly inserted and locked. |
| Low power or stalling during use. | Excessive pressure or low battery. | Reduce pressure on the nail. Recharge the unit if battery is low. |
| Vibrations ou bruits excessifs. | Bent or improperly inserted drill bit. | Check the drill bit for damage or improper insertion. Replace if necessary. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Luraco customer support.
7. Spécifications
- Numéro de modèle : Pro 35k
- Dimensions du produit : 3 x 1.25 x 6 pouces
- Poids: Environ 4 livres
- Vitesse de rotation maximale : 35,000 tr/min
- Source d'alimentation : Alimenté par batterie
- Type de batterie : 12V (inclus)
- Durée de vie moyenne de la batterie: Jusqu'à 10 heures
- Voltage: Universal (110V/60Hz to 240V/50Hz)
- Matériel: Aluminium, Acier
- Fabricant: Luraco
- GTIN (UPC) : 893640001687
8. Consignes de sécurité
Précautions de sécurité importantes :
- Always use protective eyewear to prevent eye injury from flying debris or dust.
- Do not touch the rotating bit or motor to avoid burns.
- Gardez l'appareil à l'écart de l'eau ou d'autres liquides.
- Ensure the device is turned off and unplugged before cleaning or changing bits.
- N’utilisez pas l’appareil s’il est endommagé ou s’il fonctionne mal.
- Tenir hors de portée des enfants.
9. Vidéos officielles du produit
Luraco Pro-35K Electric Nail Drill Overview
Cette vidéo donne un aperçuview of the Luraco Pro-35K Electric Nail Drill, showcasinet sa conception et ses principales caractéristiques.
Luraco PRO-35K: Made in U.S.A.
Learn more about the advanced features and reliability of the Luraco Pro-35K Nail Drill, proudly made in the U.S.A.
10. Garantie et assistance
The Luraco Pro-35K Nail Drill comes with a 1-year warranty, ensuring confidence in its quality and durability. For technical support, warranty claims, or further assistance, please visit the official Luraco website ou contactez leur service client.
Officiel Website: www.luraco.com
