1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Wallpad L6 Gold Brushed Aluminum Wall Module, specifically the dual USB charging variant. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
2. Consignes de sécurité
- L'installation doit être effectuée par un électricien qualifié, conformément aux codes et réglementations électriques locaux.
- Coupez toujours l'alimentation au niveau du disjoncteur avant d'installer ou d'entretenir le module.
- Ne pas installer en milieu humide ou damp emplacements.
- Assurez-vous que toutes les connexions de câblage sont sécurisées et correctement isolées.
- Do not exceed the specified electrical ratings of the module.
- Tenir hors de portée des enfants.
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- Wallpad L6 Gold Brushed Aluminum Wall Module (Dual USB Charging)
- Vis de montage
- Manuel de l'utilisateur (ce document)
Note: Other modules (e.g., EU French Socket, Wall Switch) are sold separately and may have different installation requirements.
4. Configuration et installation
This section outlines the general steps for installing the Wallpad L6 module. Professional installation is recommended.
- Préparez la zone d'installation : Assurez-vous que l'alimentation électrique de la zone d'installation est coupée au niveau du disjoncteur principal.
- Vérifier la compatibilité : The Wallpad L6 module is designed for an 86 Type Square Box. Round boxes are not compatible.
- Connecter le câblage : Connect the live, neutral, and ground wires to the corresponding terminals on the back of the module. Refer to the wiring diagram provided with the product packaging for specific connections.
- Monter le module : Carefully place the module into the 86 Type Square Box. Secure it using the provided mounting screws. Ensure the module is flush with the wall surface.
- Fixer la plaque frontale : Secure the brushed aluminum faceplate onto the module.
- Restaurer l'alimentation : Une fois l'installation terminée et toutes les connexions sécurisées, rétablissez le courant au niveau du disjoncteur.
Figure 4.1 : Dos view of the Wallpad L6 module showing dimensions (86mm x 86mm, 60mm depth, 66.5mm screw distance) and an 86 Type Square Box. This module requires an 86 Type Square Box for proper installation; round boxes are not compatible.
5. Operating Instructions (Dual USB Charging Module)
The Wallpad L6 Dual USB Charging Module provides convenient power for charging compatible devices.
Figure 5.1 : Devant view of the Wallpad L6 dual USB charging module. It features two USB-A ports and a red LED indicator light at the top.
- Connecter l'appareil : Plug your USB charging cable into one of the two USB-A ports on the module.
- Indication de charge : The red indicator light (if present and active) will illuminate to show that the module is powered and ready to charge.
- Chargement : Connect the other end of your USB cable to your compatible electronic device (e.g., smartphone, tablet). The device should begin charging automatically.
- Déconnecter: Once charging is complete, safely disconnect your device and then the USB cable from the module.
Note: The Wallpad L6 series also offers other modules like EU French Sockets and Wall Switches, which operate according to their specific functions. The images below illustrate examples of these other modules within the L6 series.
Figure 5.2 : Un example of a Wallpad L6 EU French Socket module, showcasing its design within a living space.
Figure 5.3 : Un example of a Wallpad L6 wall switch module, featuring a satin aluminum panel and illuminated touch buttons.
6. Entretien
- Nettoyage: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the module. Do not use abrasive cleaners, solvents, or excessive moisture.
- Inspection: Periodically inspect the module for any signs of damage, loose connections, or discoloration. If any issues are found, disconnect power and consult a qualified electrician.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Module not charging devices. |
|
|
| Module is loose in the wall. | Mauvais montage. | Disconnect power, tighten mounting screws. Ensure an 86 Type Square Box is used. |
| Red indicator light is off. | Le module n'est pas alimenté. | Check circuit breaker and wiring connections. Consult a qualified electrician if necessary. |
8. Spécifications
- Modèle: Wallpad L6 (Dual USB Charging)
- Matériel: Gold Brushed Aluminum Panel
- Compatibilité: 86 Type Square Box
- Dimensions: Approximately 86mm x 86mm (Front Panel)
- Sortie USB : Please refer to product packaging for exact USB output specifications.
- Date de mise en ligne sur Amazon : 4 avril 2024
9. Garantie et assistance
For warranty information and technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.
For further assistance, you may visit the official Wallpad website ou contactez leur service client.
