Silverstone Technology FHS 80X 80mm PWM Industrial/Server Fan Instruction Manual
Model: SST-FHS80X
1. Introduction
The Silverstone Technology FHS 80X is a high-performance 80mm fan designed for industrial and server applications. Its 38mm thick profile and steeply raked fan blades contribute to high airflow and air pressure. This fan features 4-pin PWM control for adjustable speed and dual ball bearings for extended durability. This manual provides essential information for the proper installation, operation, and maintenance of your FHS 80X fan.
2. Consignes de sécurité
Please read and understand all safety instructions before installing or operating the fan. Failure to do so may result in personal injury or damage to the product.
- Ensure power is disconnected from the system before installation or maintenance.
- Avoid touching the fan blades while the fan is operating.
- Install the fan in a well-ventilated area.
- Do not expose the fan to moisture or extreme temperatures.
- Use only the provided or recommended mounting hardware.
Figure 2.1: A protective fan grill, an essential safety component to prevent accidental contact with moving fan blades.
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- Silverstone FHS 80X Fan (1 unit)
- Fan grill (1 unit)
- Mounting screws (4 units)
Figure 3.1 : Face avant view of the Silverstone FHS 80X fan with the protective grill installed. This image shows the fan blades and the metal grill designed to prevent accidental contact.
4. Produit terminéview
The FHS 80X fan is engineered for demanding cooling environments. Key features include:
- Dimensions: 80mm x 80mm x 38mm (thickness)
- Contrôle PWM : 4-pin connector for precise speed regulation.
- Type de roulement : Dual ball bearing for enhanced longevity.
- Conception de la lame : Giant-bladed design for high static pressure and airflow.
Figure 4.1 : Côté profile of the FHS 80X fan, illustrating its substantial 38mm thickness which contributes to its high performance capabilities.
Figure 4.2: An exploded diagram showcasing the fan's superior motor construction and dual ball bearings, designed for reduced friction and extended lifespan.
Figure 4.3 : Arrière view of the FHS 80X fan, displaying the product label with model number and electrical specifications.
5. Configuration et installation
Follow these steps to properly install your FHS 80X fan:
- Préparez le système : Power off your computer or server and disconnect it from the power source. Open the chassis to access the fan mounting location.
- Monter le ventilateur : Position the fan in the desired location, ensuring correct airflow direction. Use the provided mounting screws to secure the fan to the chassis. The fan grill should be placed on the intake side to protect against foreign objects.
- Connectez l'alimentation : Locate an available 4-pin PWM fan header on your motherboard or fan controller. Connect the fan's 4-pin connector to this header. Ensure the connector is fully seated.
Figure 5.1: The 4-pin PWM connector of the FHS 80X fan, which allows for precise speed control when connected to a compatible motherboard header.
Figure 5.2 : Un angle view of the fan, showing the pre-installed protective grill and the corner screw holes for mounting.
6. Mode d'emploi
The FHS 80X fan utilizes Pulse Width Modulation (PWM) for speed control, allowing for dynamic adjustment based on system temperature or user preference.
- Contrôle automatique : When connected to a PWM-compatible motherboard header, the fan speed will automatically adjust based on the system's thermal load, as configured in the BIOS/UEFI settings.
- Contrôle manuel: Many motherboards and fan controllers offer software utilities to manually set fan curves or fixed speeds. Refer to your motherboard or controller manual for specific instructions.
- Plage de vitesse : The fan operates within a speed range of 2,000 RPM to 10,000 RPM, providing significant cooling capacity.
Figure 6.1: A graph illustrating the relationship between PWM duty cycle percentage and the resulting fan speed in RPM, demonstrating the precise control offered by the 4-pin PWM cable.
7. Entretien
Un entretien régulier permet de garantir des performances optimales et prolonge la durée de vie de votre ventilateur.
- Nettoyage: Periodically clean dust accumulation from the fan blades and grill using compressed air or a soft brush. Ensure the system is powered off before cleaning.
- Inspection: Check for any obstructions around the fan or damage to the blades or wiring.
- Entretien des roulements : The dual ball bearings are designed for long-term operation and typically do not require lubrication.
8. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Le ventilateur ne tourne pas | No power, loose connection, faulty fan header. | Check power connections. Ensure 4-pin connector is fully seated. Try a different fan header. |
| Fan spinning too slow/fast | Incorrect BIOS/UEFI settings, fan controller issue. | Adjust fan speed settings in BIOS/UEFI or fan control software. Ensure PWM header is used. |
| Bruit excessif | Dust accumulation, loose mounting, bearing issue. | Clean fan blades and grill. Ensure fan is securely mounted. If noise persists, consider replacement. Note: This is a high-performance fan and may generate significant noise at high RPMs. |
9. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | SST-FHS80X |
| Dimensions | 80 mm x 80 mm x 38 mm |
| Type de roulement | Double roulement à billes |
| Connecteur | 4-Pin PWM |
| Vol évaluétage | 12 V CC |
| Courant nominal | 0.85A |
| Puissance nominale | 10.2 W |
| Vitesse | 2,000 ~ 10,000 RPM (PWM controlled) |
| Flux d'air | 83.7 CFM (Max) |
| Pression statique | 50.8 mmH2O (Max) |
| Niveau de bruit | 61.4 dBA (maximum) |
| Matériel | Plastique |
10. Garantie et assistance
Silverstone Technology products come with a limited warranty. For detailed warranty information, please refer to the official Silverstone website ou contactez leur support client.
- Support en ligne: Visitez le site officiel Magasin SilverStone for FAQs, driver downloads, and further product information.
- Contacter le support : For technical assistance or warranty claims, please contact SilverStone customer service.
Remarque : Les spécifications et l'apparence du produit peuvent être modifiées sans préavis.
