Introduction
Thank you for choosing the Linkind Outdoor Solar Motion Sensor Light. This product is designed to provide efficient and reliable outdoor illumination for your garden, pathway, garage, or porch. Featuring 1000LM brightness, 24 high-power LEDs, dual color temperatures (3000K Warm White & 6500K Cool White), and three intelligent operating modes, these IP67 waterproof lights offer enhanced security and ambiance. Please read this manual carefully before installation and use to ensure optimal performance and longevity.
Image: The Linkind solar light installed, casting a warm glow on a garden path at night.
Consignes de sécurité
- Ensure the solar panel receives direct sunlight for at least 6-8 hours daily for optimal charging.
- Do not install the light near other strong light sources, as this may interfere with the motion sensor or automatic dusk-to-dawn operation.
- Veillez à ce que le panneau solaire reste propre et exempt de poussière, de saleté et de débris afin de maintenir son efficacité de charge.
- This product is IP67 waterproof, designed to withstand various weather conditions, but avoid submerging it in water.
- Ne tentez pas de démonter ou de modifier le produit, car cela annulera la garantie et pourrait l'endommager.
- Tenir hors de portée des enfants.
Contenu du colis
Veuillez vérifier le contenu de l'emballage pour vous assurer que tous les composants sont présents :
- Linkind Outdoor Solar Motion Sensor Light (x2)
- Piquet de terre (x2)
- Wall Mounting Screws and Anchors (x2 sets)
- Manuel de l'utilisateur (ce document)
Caractéristiques du produit
- Haute luminosité: Equipped with 24 high-power LEDs, delivering up to 1000 lumens of bright illumination.
- Double température de couleur : Offers both 3000K Warm White and 6500K Cool White light options to suit different preferences and environments.
- Capteur de mouvement : Advanced motion detection with a range of 3-8 meters and a 120° detection angle, ensuring light activates when needed.
- Trois modes de fonctionnement : Customizable lighting modes for various scenarios (details in Operating Instructions).
- Indice d'étanchéité IP67 : Designed to withstand harsh weather conditions, including rain, snow, and extreme temperatures.
- Panneau solaire à haut rendement : Monocrystalline silicon solar panel with a 22% conversion rate for fast and efficient charging.
- Installation 2 en 1 : Versatile design allows for both ground insertion and wall mounting.
- Angle réglable : Light head can be adjusted vertically by 90° and horizontally by 270° for precise lighting direction.
Image: Feature comparison highlighting Linkind's cool & warm white, motion sensor, 1800mAh battery, 1000 lumens, and monocrystalline silicon solar panel.
Image: The solar light demonstrating its IP67 waterproof, frostproof, and heatproof capabilities under a water splash.
Image : Une image détaillée view of the solar light's 24 LEDs and unique optical lens, emphasizing high charging efficiency and long illumination.
Image: A person and their dog walking past the solar light, illustrating its sensitive motion detection with a 3-8m range and 120° angle.
Configuration et installation
The Linkind solar light offers two installation options: ground insertion or wall mounting.
Insertion au sol
- Sélectionnez le mode : Before assembly, press the power button on the back of the light to select your desired operating mode (see Operating Instructions for details).
- Assembler le support : Attach the light unit to the top part of the ground stake.
- Connect Spikes: Connect the two spike sections of the ground stake together.
- Insérer dans le sol : Firmly insert the assembled light and stake into soft ground in a location that receives ampla lumière directe du soleil.
Montage mural
- Sélectionnez le mode : Before assembly, press the power button on the back of the light to select your desired operating mode.
- Fix the Holder: Use the provided screws and anchors to securely fix the wall mounting bracket to a desired wall or fence.
- Connect the Two Parts: Attach the light unit to the wall mounting bracket.
- Ajuster l'angle : Adjust the angle of the solar panel and light head to ensure optimal sunlight exposure and lighting direction.
Image: Visual instructions for both ground insertion and wall mounting methods.
Mode d'emploi
The Linkind solar light features a single button to cycle through its three operating modes and to switch between warm and cool white light.
Modification de la température de couleur
To switch between 3000K Warm White and 6500K Cool White, appuyez longuement sur le bouton d'alimentation pendant 3 seconde.
Cycling Through Modes (Short Press)
- Mode 1: Keeps dim light all night. The motion sensor does not react in this mode.
- Mode 2: Dim light when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
- Mode 3: Light is off when no motion is detected. Switches to full brightness for 20 seconds when motion is detected.
Image: Visual representation of the three lighting modes: always dim, dim with motion-activated bright, and off with motion-activated bright.
Entretien
- Panneau solaire propre : Essuyez régulièrement le panneau solaire avec un chiffon doux et sec.amp cloth to remove dust, dirt, or snow. A clean panel ensures maximum charging efficiency.
- Vérifier l'emplacement : Periodically check that the light's location still receives adequate direct sunlight, especially after seasonal changes or new foliage growth.
- Inspecter les dommages : Occasionally inspect the light for any physical damage or loose connections.
- Batterie: The built-in Lithium-ion battery is designed for long life. Do not attempt to replace it yourself.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas la nuit. | Exposition insuffisante au soleil pendant la journée. Le panneau solaire est sale. Light is in "OFF" mode (Mode 3 without motion). La batterie est épuisée. | Déplacez la lampe dans un endroit bénéficiant d'un ensoleillement plus direct. Nettoyer le panneau solaire. Press the power button to cycle to Mode 1 or Mode 2. Prévoyez 1 à 2 jours ensoleillés pour que la batterie se charge complètement. |
| La lumière vacille ou est peu lumineuse. | Partial charge of battery. Solar panel is partially obstructed or dirty. | Ensure full sunlight exposure for several hours. Nettoyez le panneau solaire et retirez toute obstruction. |
| Le détecteur de mouvement ne fonctionne pas. | Light is in Mode 1 (always dim). Le capteur est obstrué. External light interference. | Passez en mode 2 ou en mode 3. Clear any debris or objects blocking the sensor. Éloignez la lampe des autres sources de lumière intense. |
| La couleur de la lumière ne change pas. | Appui sur un bouton incorrect. | Ensure you are long-pressing the power button for 3 seconds to switch between warm and cool white. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Lien |
| Numéro de modèle | LL1801131 |
| Source de lumière | 24 LED |
| Flux lumineux | 1000 lumens |
| Température de couleur | Blanc chaud 3000K et blanc froid 6500K |
| Portée de détection du capteur de mouvement | 3-8 mètres |
| Angle de détection du capteur de mouvement | 120° |
| Indice de protection IP | IP67 |
| Source d'énergie | Alimentation solaire |
| Type de batterie | 1 batterie lithium-ion (incluse) |
| Efficacité des panneaux solaires | 22% Conversion Rate (Monocrystalline Silicon) |
| Matériel | Acrylonitrile butadiène styrène (ABS) |
| Dimensions du produit (L x l x H) | 15.4 x 4.8 x 10.1 cm (6.06 x 1.89 x 3.98 pouces) |
| Poids de l'article | 600 g (1.32 lb) |
Image: Detailed diagram illustrating the dimensions, adjustable angle, motion sensor, and PET surface layer of the solar light.
Garantie et assistance
For warranty information and customer support, please refer to the product packaging or contact Linkind customer service directly through their official website or the retailer where the product was purchased. Please have your model number (LL1801131) and purchase details ready when contacting support.
