1. Produit terminéview
The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.
Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.
Caractéristiques principales :
- Conception à haut débit d'air : Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
- Éclairage D-RGB intégré : Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
- Ventilateurs préinstallés : Includes three high-performance M25-140 D-RGB fans.
- Support de refroidissement étendu : Supports up to 420mm radiators in the front and 360mm in the top.
- Intérieur spacieux : Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
- Stockage flexible : Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
- Modern Front I/O: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.
2. Configuration et installation
This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.
2.1 Préparation du châssis
Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.
Figure 2: The removable front panel allows for easy installation of fans and radiators.
Figure 3: The removable top mesh panel facilitates fan and radiator installation.
2.2 Installation de la carte mère
The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.
2.3 Installation du bloc d'alimentation (PSU)
Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).
2.4 Installation du périphérique de stockage
The case offers extensive storage options:
- SSD 2.5 pouces : Up to 9 dedicated 2.5" drive bays are included.
- Disques durs 3.5 pouces : Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.
Figure 4: Multiple storage options for 2.5" and 3.5" drives.
2.5 Installation de la carte graphique (GPU)
The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.
2.6 Installation du système de refroidissement
Le châssis prend en charge différentes configurations de ventilateurs et de radiateurs :
- Soutien des fans :
- Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
- Top: 3x 120mm or 3x 140mm
- Arrière : 1x 120 mm ou 1x 140 mm
- Support pour radiateur de refroidissement liquide :
- Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
- Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
- Arrière : 120 mm
Figure 5: High-end cooling compatibility with various fan and radiator sizes.
2.7 Gestion des câbles
The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.
2.8 Vidéos d'installation
Video 1: Detailed PC Build Guide in the Phanteks Eclipse G500A (13:33).
Video 2: Another comprehensive PC assembly guide featuring the Phanteks Eclipse G500A (14:01).
3. Mode d'emploi
3.1 Panneau d'E/S avant
Le panneau d'E/S avant offre un accès pratique aux ports et commandes essentiels :
- Bouton d'alimentation : Pour allumer/éteindre votre système.
- Ports USB 3.0 (x2) : Pour connecter des périphériques USB 3.0.
- USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
- Prise combinée microphone/casque : Pour l'entrée et la sortie audio.
- Bouton de mode D-RGB : Cycles through pre-programmed D-RGB lighting effects.
- Bouton de couleur D-RGB : Modifie la couleur de l'éclairage D-RGB.
Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.
3.2 Contrôle de l'éclairage D-RGB
The integrated D-RGB lighting can be controlled in two ways:
- Contrôle manuel: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
- Synchronisation de la carte mère : Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.
Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.
4. Entretien
Un entretien régulier contribue à garantir des performances optimales et une longue durée de vie aux composants de votre PC.
- Filtration de la poussière : The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
- Nettoyage intérieur: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
- Nettoyage extérieur : Essuyez les surfaces extérieures avec un chiffon doux, damp Chiffon. Évitez les nettoyants abrasifs ou les solvants.
5. Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer avec votre boîtier PC.
5.1 Problèmes d'alimentation électrique
- Le système ne s'allume pas :
- Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
- Vérifiez que l'interrupteur du bloc d'alimentation est en position « ON ».
- Vérifiez que le câble de l'interrupteur d'alimentation du panneau avant est correctement connecté à l'en-tête F_PANEL de la carte mère.
5.2 D-RGB Lighting Issues
- D-RGB not lighting up or incorrect colors:
- Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
- If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
- Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
- Try cycling through modes and colors using the front I/O buttons to rule out software issues.
5.3 Bruit ou dysfonctionnement du ventilateur
- Bruit excessif du ventilateur :
- Vérifiez l'accumulation de poussière sur les pales du ventilateur et nettoyez-les si nécessaire.
- Ensure fans are securely mounted and not vibrating against the chassis.
- Verify fan speeds are controlled appropriately by the motherboard or fan controller.
- Le ventilateur ne tourne pas :
- Check fan power connections to the motherboard or fan hub.
- Ensure fan headers are enabled in the BIOS/UEFI settings.
6. Spécifications
Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.
| Fonctionnalité | Spécification |
|---|---|
| Nom du modèle | Eclipse G500A DRGB, White |
| Numéro de modèle de l'article | PH-EC500GA_DMW01A |
| Facteur de forme | Mid Tower |
| Dimensions (L x l x H) | 19.69 x 9.45 x 20.28 pouces (500 x 240 x 515 mm) |
| Poids de l'article | 23.2 livres |
| Matériel | Châssis en acier, verre trempé |
| Prise en charge de la carte mère | ATX, micro-ATX, mini-ITX, E-ATX (jusqu'à 280 mm de large) |
| Emplacements d'extension | 7 |
| Prise en charge verticale des GPU | Yes (with optional bracket PH-VGPUKT4.0_03 or riser cable) |
| Baies de lecteur internes de 3.5 pouces | 10 (2x included, expandable) |
| Baies de lecteur internes de 2.5 pouces | 9 (9 inclus) |
| E/S avant | 2x USB 3.0, USB-C Gen2, Microphone/Headphone Combo, Power Button, D-RGB Mode, D-RGB Color |
| Ventilateurs préinstallés | 3x M25-140 D-RGB (Front) |
| Longueur maximale du GPU | 435 mm / 17.2 pouces |
| Hauteur maximale du refroidisseur de processeur | 185 mm |
| Longueur maximale du bloc d'alimentation | 195mm (if all 4 bottom HDD positions used) / 250mm (if 2 bottom HDD used) |
| Méthode de refroidissement | Ventilateur, eau |
7. Garantie et assistance
Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks website ou contactez leur service client.
Coordonnées:
- Website: www.phanteks.com
- Phanteks Taiwan Inc.: 11e étage, n° 150, Jian 1st Rd., district de Zhonghe, Nouvelle ville de Taipei 235
- Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
- Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States
Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).
