Introduction
This manual provides comprehensive instructions for the STARTRC Hard Case, model 1222, designed specifically for the DJI Mavic 3 Classic Fly More Combo and its controller. This robust, waterproof transport case ensures the safe storage and transportation of your valuable drone equipment and accessories. Please read this manual thoroughly before use to ensure proper handling and maximum protection for your gear.
Configuration et stockage
The STARTRC Hard Case features custom-cut foam inserts designed to securely hold your DJI Mavic 3 Classic drone, remote controller, batteries, and other accessories. Follow these steps to properly arrange your equipment:
- Ouvrez le boîtier : Release the latches on the front of the case and lift the lid.
- Identifier les compartiments : The foam interior has dedicated slots for each component. Refer to the diagrams below for optimal placement.
- Place Drone: Carefully place the DJI Mavic 3 Classic drone into its designated slot. Ensure it fits snugly without force.
- Contrôleur de lieu : Insert your DJI RC or RC-N1 remote controller into its respective compartment. The case is designed to accommodate both types.
- Stocker les piles : Place intelligent flight batteries into their individual slots. The case typically has space for multiple batteries.
- Ajouter des accessoires : Utilize the remaining compartments for accessories such as ND filter kits, low-noise propellers, USB-C control sticks, RC cables, 65W portable charger, and battery charging hub.
Figure 1: Optimal arrangement of DJI Mavic 3 Classic drone and accessories within the STARTRC Hard Case.
Figure 2: The egg-crate foam in the lid provides cushioning and protection for drone propellers.
Figure 3: The case is designed to securely fit both DJI RC and DJI RC-N1 standard remote controllers.
Opération
Operating the STARTRC Hard Case is straightforward, focusing on secure closure and comfortable transport.
- Clôture du dossier : Once all items are securely placed, gently close the lid. Ensure no items are protruding or preventing a complete seal.
- Securing Latches: Press down firmly on both rugged latches until they click into place. This ensures the case is securely closed and maintains its waterproof and pressure-resistant properties.
- Porter : Use the comfortable, woven handle for easy transportation. The case is designed to be labor-saving and easy to lift.
- Air Pressure Balance Valve: The case includes an air pressure balance valve. This valve automatically adjusts internal air pressure, which is useful when traveling to different altitudes, preventing vacuum lock or pressure buildup.
Figure 4: The case features IP67 level waterproofing and pressure resistance for extreme protection.
Figure 5: Key features include a comfortable handle, rugged latches, padlock hole, and an air pressure balance valve.
Figure 6: The ergonomic handle allows for easy and comfortable transportation.
Entretien
Proper maintenance will extend the life and effectiveness of your STARTRC Hard Case.
- Nettoyage de l'extérieur : Wipe the exterior ABS shell with a damp cloth and mild soap if necessary. Avoid abrasive cleaners that could damage the surface.
- Nettoyage de la mousse intérieure : The EVA foam inserts can be gently vacuumed to remove dust or debris. For spills, spot clean with a damp cloth and allow to air dry completely before reassembling.
- Inspecting Latches and Seal: Regularly check the latches for any signs of wear or damage. Ensure the rubber seal around the lid is clean and free of debris to maintain its waterproof integrity.
- Stockage: Rangez l'étui dans un endroit frais et sec, à l'abri de la lumière directe du soleil lorsqu'il n'est pas utilisé.
Dépannage
If you encounter any issues with your STARTRC Hard Case, refer to the following common solutions:
- Le dossier ne se clôture pas correctement :
- Check if any items inside are misplaced or too large, preventing the lid from seating correctly.
- Ensure the foam inserts are correctly aligned.
- Inspect the latches for any obstructions or damage.
- Fuite d'eau :
- Verify that the latches are fully engaged and securely closed.
- Inspect the rubber gasket around the lid for cracks, tears, or debris that might compromise the seal. Clean the gasket if necessary.
- Ensure the air pressure balance valve is functioning correctly and not obstructed.
- Difficulty Opening After Air Travel:
- The air pressure balance valve should prevent this, but if it occurs, allow the case to equalize pressure in a stable environment for a few minutes before attempting to open.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Nom du produit | Mavic 3 Classic Waterproof Case |
| Numéro de modèle | 1222 |
| Modèles compatibles | DJI Mavic 3 Classique |
| Dimensions du produit (L x l x H) | 42 cm L x 36 cm l x 16 cm H (16.5 x 13.3 x 5.9 pouces) |
| Poids du produit | 1.9 kg (4.2 lb) |
| Matériau principal | Acrylonitrile Butadiene Styrene (ABS) and Ethylene-vinyl acetate (EVA) |
| Revêtement extérieur | Dur |
| Couleur | Black with Red interior accents |
| Type de fermeture | Buckle (Latches) |
| Type de poignée | Woven Handle / Versatile Handle |
| Nombre de compartiments | 1 (main compartment with multiple foam cutouts) |
| Indice d'étanchéité | IP67 Level Waterproof |
| Caractéristiques | Full protection, Moisture-proof, Waterproof design, High-Density Foam, Pressure resistance, Air Pressure Balance Valve, Padlock Hole |
Figure 7 : Plusview of product dimensions, weight, materials, and key protective features.
Garantie et assistance
For warranty information or technical support regarding your STARTRC Hard Case, please refer to the official STARTRC webConsultez leur site web ou contactez directement leur service client. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.
Remarque : Les conditions de garantie spécifiques peuvent varier selon la région et le détaillant.
