Reloop RT-1 BT Turntable User Manual

1. Introduction et plusview

The Reloop RT-1 BT is a versatile belt-drive turntable designed for both aspiring DJs and Hi-Fi enthusiasts. It combines classic vinyl playback with modern wireless convenience, featuring integrated Bluetooth for seamless connection to compatible speakers. Its robust construction, including a sturdy chassis and precision-cast platter, ensures stable and distortion-free audio reproduction. The turntable comes equipped with a pre-assembled Ortofon OM Black magnetic pickup system and an integrated phono pre-amplifier, offering flexibility for various audio setups.

2. Consignes de sécurité

Please read and understand all safety instructions before operating the Reloop RT-1 BT turntable. Retain this manual for future reference.

• Alimentation: Utilisez uniquement l'adaptateur secteur fourni. Assurez-vous que le volumetage matches your local power supply. Disconnect power during thunderstorms or when unused for extended periods.
• Eau et humidité : Do not expose the unit to rain, moisture, or liquids. Avoid placing objects filled with liquids, such as vases, on or near the turntable.
• Ventilation: Assurez une ventilation adéquate. Ne bloquez pas les ouvertures de ventilation. Installez l'appareil conformément aux instructions du fabricant.
• Chaleur: Ne pas installer à proximité de sources de chaleur telles que radiateurs, bouches de chauffage, poêles ou autres appareils (y compris amp(échangeurs thermiques) qui produisent de la chaleur.
• Nettoyage: Nettoyer uniquement avec un chiffon sec. Éviter d'utiliser des nettoyants liquides ou en aérosol.
• Entretien: N’essayez pas de réparer ce produit vous-même. Confiez toute réparation à un technicien qualifié. Une réparation est nécessaire si l’appareil a été endommagé de quelque manière que ce soit : cordon d’alimentation ou prise endommagés, liquide renversé ou objets tombés à l’intérieur, exposition à la pluie ou à l’humidité, dysfonctionnement ou chute.
• Placement: Placez le plateau tournant sur une surface stable et plane afin d'éviter les vibrations et d'assurer un bon fonctionnement.

3. Contenu du colis

Carefully unpack your Reloop RT-1 BT turntable and verify that all the following components are included:

• Reloop RT-1 BT Turntable Unit
• Plateau en aluminium
• Belt Drive (pre-installed or separate)
• Reloop OM Black Pickup System (by Ortofon, pre-assembled on headshell)
• Coquille
• Felt Mat
• Dust Cover (removable acrylic)
• Contrepoids
• Câble audio (RCA)
• Center Adapter (for 45 RPM records)
• Bloc d'alimentation
• Manuel d'instructions

4. Installation

Follow these steps to set up your Reloop RT-1 BT turntable for the first time.

4.1 Déballage et placement

1. Retirez soigneusement tous les composants de l'emballage.
2. Place the turntable unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust.

4.2 Installation du plateau et de la courroie

1. Place the aluminum platter onto the spindle of the turntable.
2. If the belt is not pre-installed, carefully loop the drive belt around the motor pulley and the inner rim of the platter.
3. Placez le tapis de feutre sur le plateau.

Image: The Reloop RT-1 BT turntable with its aluminum platter and S-shaped tonearm, highlighting the universal SME connection and cast platter.

4.3 Configuration du bras de lecture et de la cellule

1. The Ortofon OM Black pickup system is pre-assembled on the headshell. Attach the headshell to the tonearm.
2. Install the counterweight onto the rear of the tonearm. Adjust it to balance the tonearm horizontally. Refer to the Ortofon manual for precise tracking force settings (typically 1.5-2.0 grams for OM Black).
3. Adjust the anti-skating dial to match the tracking force setting.

Image: The Reloop RT-1 BT turntable shown with its removable acrylic dust cover and the included Reloop OM Black pickup system by Ortofon.

4.4 Connexions audio

The RT-1 BT features an integrated phono pre-amplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. You can also use the PHONO output if your ampL'amplificateur possède une entrée phono dédiée.

1. Connect the RCA audio cable from the turntable's output to the appropriate input on your amplificateur ou enceintes amplifiées.
2. Select either PHONO or LINE output using the switch on the rear panel, depending on your ampEntrée du convertisseur.

Image : Arrière view of the Reloop RT-1 BT turntable, illustrating the integrated phono pre-amplifier and its output connections.

4.5 Connexion d'alimentation

1. Connect the power supply unit to the DC input on the turntable.
2. Branchez l’adaptateur secteur sur une prise murale adaptée.

5. Mode d'emploi

This section details how to operate your Reloop RT-1 BT turntable.

5.1 Jouer un disque

1. Place a record on the felt mat. For 7-inch records, use the included center adapter.
2. Select the correct speed (33 1/3 RPM for LPs, 45 RPM for singles) using the speed selector switch.
3. Appuyez sur le bouton START/STOP pour lancer la rotation du plateau.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired groove of the record.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOP button.

Image: Close-up of the Reloop RT-1 BT turntable's controls, featuring the precise pitch adjustment slider (+/-10%) and the two-speed selector (33 1/3 & 45 RPM).

5.2 Pitch Adjustment

Use the pitch slider to fine-tune the playback speed by +/-10% for precise beat matching or personal preference.

5.3 Connectivité Bluetooth

The RT-1 BT allows wireless audio streaming to Bluetooth-enabled speakers or stereo systems.

1. Ensure your Bluetooth speaker or receiver is in pairing mode.
2. Press and hold the Bluetooth pairing button on the RT-1 BT (refer to the diagram in your quick start guide for exact location). The Bluetooth indicator light will flash.
3. Once successfully paired, the indicator light will remain solid. Audio from the turntable will now stream wirelessly to your connected device.

Image: The Reloop RT-1 BT turntable demonstrating smart connectivity, wirelessly streaming audio to two Bluetooth speakers.

6. Entretien

Regular maintenance will help ensure the longevity and optimal performance of your turntable.

• Nettoyage de l'unité : Use a soft, dry, lint-free cloth to wipe the turntable chassis and dust cover. Avoid abrasive cleaners or solvents.
• Entretien du stylet : Periodically clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
• Cache-poussière : Gardez le couvercle anti-poussière fermé lorsque la platine n'est pas utilisée afin de la protéger de la poussière et des débris.
• Inspection de la courroie : Occasionally inspect the drive belt for signs of wear, stretching, or cracking. Replace the belt if necessary to maintain accurate speed.

7. Dépannage

If you encounter issues with your Reloop RT-1 BT, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Reloop customer support or your retailer.

8. Spécifications

9. Garantie et assistance

For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting beyond this manual, or service inquiries, please contact your authorized Reloop dealer or Reloop customer service directly. Keep your proof of purchase for warranty claims.