1. Introduction
This instruction manual provides detailed guidance for installing and operating your LIGHTAILING LED Lighting Kit, specifically designed for the LEGO 10297 Boutique Hotel model. This kit enhances your LEGO creation by illuminating its various features, bringing the model to life with dynamic lighting.
2. Consignes de sécurité
- Voltage Exigences : To prevent damage or injury, use only AA batteries or a USB charger with a voltage output of less than 5V.
- Manipulation soigneuse : Handle the LED lights and wires with care. Avoid hard pulling, bending, or shaking the components, as this can cause damage.
- Recommandation d'âge : This product is recommended for users aged 6 years and up. Adult supervision is advised during installation.
- Risque d'étouffement : Présence possible de petites pièces. Tenir hors de portée des jeunes enfants.
3. Contenu du colis
Your LIGHTAILING LED Lighting Kit package includes the following components:
- 1 x USB Light Kit (various LED lights and connecting wires)
- 1 x Detailed Instruction Guide (paper manual)
- 1 x Battery Box (for AA batteries, batteries not included)
Note: The LEGO 10297 Boutique Hotel set and any minifigures shown in promotional materials are not included with this lighting kit.
4. Configuration et installation
Installation of the LED lighting kit requires careful attention to detail. Follow the provided paper instruction guide step-by-step. The guide includes color photos to assist you through each stage du processus.
4.1 Étapes générales d'installation
- Préparation: Ensure your LEGO 10297 Boutique Hotel model is fully assembled before beginning the lighting kit installation.
- Démontage (partiel) : The instructions will guide you on which sections of your LEGO model need to be partially disassembled to integrate the wiring. This often involves removing roof sections or upper floors.
- Acheminement des fils : Carefully route the thin LED wires through the designated channels and gaps in your LEGO bricks as indicated in the manual. Avoid pinching or sharply bending the wires.
- Emplacement de la lumière : Attach the LED lights to the specified locations. The kit is designed with contact points that allow for easy removal of upper floors without disconnecting wires, ensuring modularity.
- Remontage: Once all lights and wires are in place, reassemble the LEGO sections, ensuring no wires are trapped or damaged.
- Connexion électrique : Connect the USB light kit to the battery box or a compatible 5V USB power source.
4.2 Ressources supplémentaires
For further assistance, installation videos are available on the LIGHTAILING website for some products. PDF instructions with more specific details can also be provided upon request.
Official display video demonstrating the LIGHTAILING LED Lighting Kit for LEGO 10297 Boutique Hotel. This video showcases the illuminated model and the modular design allowing for easy removal of floors.
5. Mode d'emploi
Once the lighting kit is fully installed and connected to a power source, the lights will activate. There are no complex controls; the system is designed for simple on/off operation via the power source.
5.1 Alimentation des lumières
- Boîtier de batterie: Insert AA batteries (not included) into the battery box. Ensure correct polarity. Use the switch on the battery box to turn the lights on or off.
- Puissance USB: Connect the USB cable from the light kit to a 5V USB power adapter (e.g., phone charger, power bank, computer USB port). The lights will turn on automatically when power is supplied. Disconnect to turn off.
6. Entretien
The LIGHTAILING LED Lighting Kit requires minimal maintenance to ensure its longevity and performance.
- Nettoyage: Use a soft, dry cloth to gently wipe away dust from the LED lights and wires. Avoid using liquids or abrasive cleaners.
- Remplacement de la batterie : If using the battery box, replace batteries when lights dim or cease to function. Always replace all batteries at once with new ones of the same type.
- Stockage: If storing the LEGO model with the lighting kit installed, ensure wires are not compressed or tangled. Disconnect the power source.
7. Dépannage
If you encounter any issues with your lighting kit, refer to the following troubleshooting tips:
| Problème | Cause possible | Solution |
|---|---|---|
| Les lumières ne s'allument pas. | No power, incorrect battery installation, or faulty connection. | Check power source (USB or batteries). Ensure batteries are correctly inserted and charged. Verify all connections are secure. |
| Certains éclairages ne fonctionnent pas. | Loose connection, damaged wire, or faulty LED. | Inspect individual light connections and wires for damage or disconnections. Ensure contact points for modular sections are properly aligned. |
| Les lumières sont tamisées. | Batterie faible. | Replace batteries or switch to a fresh USB power source. |
| Wires appear fragile or damaged. | Improper handling during installation. | Exercise extreme care when routing wires. If a wire is separated from a contact piece, contact support for assistance. |
8. Spécifications
- Numéro de modèle : 10297
- Matériel: Plastique
- Type de source lumineuse : DIRIGÉ
- Source d'alimentation : Battery Powered (AA batteries) or USB (5V)
- Voltage: 5 volts
- Piles incluses : Non
- Poids de l'article : 7 onces
- Dimensions du produit : 6.69 x 4.72 x 209 pouces (les dimensions de l'emballage peuvent varier)
- Âge recommandé par le fabricant : 6 ans et plus
9. Garantie et assistance
LIGHTAILING offers a garantie gratuite de deux ans for this LED lighting kit. If you have any questions, require assistance with installation, or need to address any product issues, please do not hesitate to contact our customer service team via email. We are committed to providing prompt and helpful support.
For support, please refer to the contact information provided in your package or on the official LIGHTAILING website.
