Manuel d'utilisation du commutateur Ethernet NVIDIA Spectrum-2 MSN3700C

1. Introduction

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the NVIDIA Spectrum-2 MSN3700C Ethernet Switch. The MSN3700C is a high-performance 1U 32-port 100GbE Open Ethernet Network switch designed for spine or high-density leaf applications in data center environments.

Figure 1: NVIDIA Spectrum-2 MSN3700C Ethernet Switch. This image displays the front panel of the switch, highlighting its compact 1U form factor and the arrangement of its 32 SFP+ ports, designed for high-speed network connectivity.

2. Consignes de sécurité

Respectez les consignes de sécurité suivantes afin d'éviter les blessures et les dommages matériels :

• Assurez-vous d'une mise à la terre correcte avant de brancher l'alimentation.
• Do not operate the switch in environments exceeding the specified temperature range (up to 60 Degrees Celsius).
• Use only the provided power supplies.
• Évitez de bloquer les ouvertures de ventilation pour éviter la surchauffe.
• Seul un personnel qualifié doit effectuer l'installation et la maintenance.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• 1 x NVIDIA Spectrum-2 MSN3700C Ethernet Switch
• 2 x Power Supplies (AC)
• 1 x Rail Kit

4. Installation

4.1. Installation physique

The MSN3700C switch is designed for rail mounting, suitable for standard server racks.

1. Attach the provided rail kit to the server rack according to the rail kit instructions.
2. Carefully slide the switch onto the installed rails until it clicks into place.
3. Secure the switch to the rack using the appropriate screws.

4.2. Connexion électrique

Connect the two AC power supplies to the switch and then to a grounded power source.

• Insert each power supply unit into its designated slot on the switch.
• Connect the power cables from the power supply units to separate, grounded AC outlets for redundancy.
• Verify that the power indicator LEDs on the switch illuminate.

4.3. Connexions réseau

The switch features 32 SFP+ ports for 100 Gigabit Ethernet connectivity.

• Insert compatible SFP+ transceivers into the desired ports.
• Connect optical fiber cables from the transceivers to your network devices (servers, other switches).
• The ports can be split to support up to 128x 10/25GbE ports using appropriate splitter cables and transceivers.

5. Mode d'emploi

5.1. Fonctionnalités de base

The MSN3700C supports comprehensive Layer-2 and Layer-3 switching capabilities.

• Layer-2 Switching: Facilitates efficient data forwarding within a local network segment.
• Layer-3 Switching: Enables routing between different network segments and subnets.

5.2. Fonctionnalités avancées

The switch incorporates advanced features for modern data center networking:

• RoCE Transport: Robust support for RDMA over Converged Ethernet, powering NVMe over Fabric and Machine Learning applications leveraging NVIDIA GPUDirect.
• VXLAN : Best-in-class VXLAN scale for network virtualization, supporting high-performance single-pass VXLAN routing.
• Network Telemetry: Features like NVIDIA What Just Happened (WJH) telemetry, hardware-accelerated histograms, and Inband Network Telemetry (INT)-ready hardware provide deep visibility into network performance and dramatically reduce mean time to issue resolution.
• Programmable Pipeline: Allows programmatic parsing, processing, and editing of packets for flexible network operations.

6. Entretien

6.1. Conditions environnementales

Maintain the operating environment within specified limits to ensure optimal performance and longevity.

• Température: Do not exceed 60 Degrees Celsius. Ensure adequate airflow.
• Humidité: Keep within recommended non-condensing humidity levels.

6.2. Nettoyage

Periodically clean the exterior of the switch and ensure ventilation openings are free from dust and debris.

• Utilisez un chiffon doux et sec pour le nettoyage.
• N’utilisez pas de nettoyants liquides ni d’aérosols directement sur l’appareil.
• Assurez-vous que l'alimentation électrique est coupée avant le nettoyage.

7. Dépannage

If you encounter issues with your NVIDIA Spectrum-2 MSN3700C Ethernet Switch, consider the following basic troubleshooting steps:

• Pas d'alimentation : Verify power cable connections and ensure power outlets are functional. Check power supply unit status LEDs.
• Link Issues: Confirm SFP+ transceivers are correctly seated and optical fiber cables are undamaged and properly connected. Check link status LEDs on the switch and connected devices.
• Problèmes de performance : Utilize the switch's telemetry features (WJH, histograms) to diagnose network congestion or packet loss. Consult network configuration.
• Configuration Access: Ensure management interfaces are correctly configured and accessible.

For advanced troubleshooting or persistent issues, refer to the NVIDIA support resources.

8. Spécifications

9. Informations sur la garantie

NVIDIA products typically come with a standard limited warranty. For specific warranty terms and conditions applicable to your NVIDIA Spectrum-2 MSN3700C Ethernet Switch, please refer to the warranty documentation included with your purchase or visit the official NVIDIA webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

10. Assistance

For technical assistance, product documentation, software downloads, and further support, please visit the official NVIDIA support portal:

NVIDIA Support Website

You may also find additional resources and community forums on the NVIDIA website.