Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
Caractéristiques du produit
- Capteur de mouvement intégré : Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
- Durée de maintien réglable : Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
- Trois modes de fonctionnement :
- Mode automatique: Light activates when motion is detected in dark conditions.
- Marche : Light remains constantly on.
- Mode G : Light activates when motion is detected in both daytime and nighttime conditions.
- Trois températures de couleur : Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
- Conception ultra-mince : Bas-profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
- Installation polyvalente : Can be installed as a flush mount on ceilings or walls.
Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.
Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.
Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- 1x Corded Motion Activated Ceiling Light
- 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
- 1x Manuel d'instructions (ce document)
Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.
Consignes de sécurité
AVERTISSEMENT: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.
- Assurez-vous que l'alimentation électrique est coupée avant de manipuler tout câblage.
- Ce luminaire est conçu pour une alimentation électrique de 120 V CA.
- Ne tentez pas de modifier le dispositif.
- Gardez les enfants éloignés de la zone d'installation.
Configuration et installation
Suivez ces étapes pour une installation correcte :
- Préparez l'installation :
- Coupez le courant au niveau du disjoncteur avant de commencer.
- Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
- Installez le support de montage :
- Rotate and remove the plastic mounting bracket from the light fixture.
- Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
- Connexions filaires :
- Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
- Use the hanging rope to temporarily support the fixture during wiring.
- Monter le luminaire :
- Rentrez soigneusement tous les fils dans la boîte de jonction.
- Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
- Restaurer l'alimentation : Remettez le courant au disjoncteur.
Figure 4 : Guide visuel du processus d'installation.
Video 1: Official BLNAN Motion Sensor Ceiling Light Installation Overview. This video demonstrates the installation process and key features of the light.
Mode d'emploi
The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.
- Sélection du mode de fonctionnement :
- Locate the mode switch (labeled AUTO, ON, G).
- Slide the switch to your desired mode:
- VOITURE: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
- SUR: Light remains continuously on, regardless of motion or ambient light.
- G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
- Adjusting Hold Time:
- Locate the hold time switch (labeled 30S, 120S, 180S).
- Slide the switch to set how long the light remains on after motion is no longer detected:
- 30S: 30 secondes
- 120S: 120 secondes (2 minutes)
- 180S: 180 secondes (3 minutes)
Figure 5: Switches for adjusting hold time and operating modes.
Entretien
Un entretien régulier garantit des performances optimales et une longue durée de vie à votre plafonnier LED.
- Nettoyage: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Durée de vie de la LED: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
- Inspection: Vérifiez régulièrement l'appareil pour détecter tout signe de dommage ou de connexion desserrée. En cas de problème, coupez l'alimentation et consultez un électricien qualifié.
Dépannage
Si vous rencontrez des problèmes avec votre luminaire, consultez les problèmes et solutions courants suivants :
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas. | No power supply; incorrect wiring; ambient light too bright (in AUTO mode). | Check circuit breaker. Verify wiring connections. Switch to G mode to test motion sensor in brighter conditions. |
| La lumière s'allume inopinément ou reste allumée trop longtemps. | Motion sensor interference; incorrect mode/hold time setting; faulty sensor. | Ensure no objects are moving within the sensor's range. Adjust hold time setting. Try switching modes. |
| La lumière clignote. | Alimentation électrique instable ; connexion électrique desserrée. | Check power supply stability. Verify all wire connections are secure. |
Caractéristiques
| Attribut | Détail |
|---|---|
| Numéro de modèle | LD-GB-028WM |
| Dimensions | 8.7"L x 8.7"l x 0.98"H |
| Quoitage | 18 watts |
| Luminosité | 1800 lumens |
| Températures de couleur | 3000K (blanc chaud), 4000K (blanc neutre), 5000K (blanc froid) |
| Voltage | 120 volts |
| Angle de détection du capteur de mouvement | 120° |
| Portée de détection du capteur de mouvement | 10ft (semidiameter) |
| Hauteur de montage recommandée | 11.5 pieds |
| Durée de vie moyenne | 30,000 heures |
| Matériel | Plastique |
| Utilisation intérieure/extérieure | Intérieur |
| Gradable | Non |
Garantie et assistance
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.
