Manuel d'utilisation du radiateur électrique à plinthe convecteur linéaire Dimplex LC2507W31

Informations importantes sur la sécurité

Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

• Débranchez toujours l’alimentation avant toute intervention d’entretien ou de nettoyage.
• Ne pas installer dans des zones où de l'essence, de la peinture ou d'autres liquides inflammables sont utilisés ou stockés.
• Maintain clearances from combustible materials as specified in the installation section.
• Ce radiateur est chaud lorsqu'il est utilisé. Pour éviter les brûlures, ne laissez pas la peau nue toucher les surfaces chaudes.
• Une surveillance étroite est nécessaire lorsqu'un appareil de chauffage est utilisé par ou à proximité d'enfants ou de personnes invalides.

Produit terminéview

The Dimplex LC2507W31 is a 25-inch linear convector electric baseboard heater designed to provide efficient and quick heating for various indoor spaces. Its compact and sleek design allows for discreet installation while delivering consistent warmth.

Figure 1 : Face avant view of the Dimplex LC2507W31 Linear Convector Electric Baseboard Heater.

Figure 2 : Vue de face détaillée view of the Dimplex LC2507W31 heater, highlighting its sleek design.

Figure 3: Dimensions of the Dimplex LC2507W31 heater, showing its length, height, and depth for installation planning.

Configuration et installation

This section provides instructions for the proper installation of your Dimplex baseboard heater. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.

1. Emplacement de montage

• Mount the heater on a wall, ensuring it is level.
• Maintain a minimum clearance of 6 inches (15 cm) from the floor and 12 inches (30 cm) from any combustible materials above the heater.
• Avoid installing directly below electrical outlets.

2. Connexion électrique

• Ensure the main power supply to the circuit is turned OFF at the circuit breaker or fuse box before beginning any wiring.
• Connect the heater to a dedicated 240V circuit. Refer to the wiring diagram provided with the heater for specific connections.
• All wiring must comply with the National Electrical Code (NEC) and local codes.

3. Securing the Heater

• Secure the heater to the wall studs using appropriate mounting hardware.
• Ensure the heater is firmly attached and stable.

Mode d'emploi

The Dimplex LC2507W31 baseboard heater operates by convection, drawing in cool air from the bottom and releasing warm air from the top. This model typically requires an external thermostat for temperature control (not included).

1. Mise sous tension initiale

• After installation, turn on the main power supply to the heater circuit.
• The heater may emit a slight odor during its first few hours of operation. This is normal and will dissipate quickly.

2. Contrôle de la température

• If an external thermostat is installed, set the desired room temperature using the thermostat controls.
• Le chauffage s'allumera et s'éteindra pour maintenir la température réglée.

3. Conseils généraux d'utilisation

• Do not block the air intake or outlet grilles. This can reduce heating efficiency and pose a fire hazard.
• Keep drapes, furniture, and other objects away from the heater to ensure proper airflow and safety.

Figure 4: The Dimplex LC2507W31 heater discreetly installed in a bedroom, demonstrating its compact footprint.

Figure 5: The Dimplex LC2507W31 heater installed in a bathroom, showcasing its suitability for various room types.

Figure 6: The Dimplex LC2507W31 heater installed in a kitchen, illustrating its versatile placement options.

Entretien

Your Dimplex baseboard heater requires minimal maintenance. Regular cleaning will help maintain its efficiency and appearance.

1. Nettoyage

• Before cleaning, ensure the power to the heater is turned OFF at the circuit breaker.
• Allow the heater to cool completely.
• Essuyez les surfaces extérieures avec un chiffon doux, damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
• Use a vacuum cleaner with a brush attachment to remove dust from the grilles and interior components.
• Do not spray liquids directly onto the heater.

2. Stockage

If storing the heater for an extended period, ensure it is clean and dry. Store in a cool, dry place, preferably in its original packaging to protect it from dust and damage.

Dépannage

If you experience issues with your Dimplex baseboard heater, refer to the following common problems and solutions. If the problem persists, contact qualified service personnel.

Caractéristiques

Garantie et assistance

Garantie limitée

Dimplex warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty does not cover damage resulting from misuse, abuse, accident, alteration, or improper installation.

Assistance clientèle

For technical assistance, troubleshooting, or warranty claims, please contact Dimplex customer support:

• Website: www.dimplex.com
• Téléphone: Refer to the Dimplex website pour les numéros de contact régionaux.
• E-mail: Refer to the Dimplex website pour les adresses e-mail d'assistance.

Please have your model number (LC2507W31) and date of purchase ready when contacting support.