NutriBullet GO Cordless Blender Instruction Manual

Introduction

The NutriBullet GO Cordless Blender is designed for convenience and portability, allowing you to prepare smoothies and protein shakes on the go. This manual provides essential information for safe and effective use of your appliance.

Mesures de protection importantes

Respectez toujours les consignes de sécurité de base lors de l'utilisation d'appareils électriques afin de réduire les risques d'incendie, d'électrocution, de blessure ou de dommages matériels.

• Read all instructions before operating the NutriBullet GO.
• Gardez l’appareil et son cordon hors de portée des enfants.
• Ne plongez pas la base motorisée dans l'eau ou tout autre liquide.
• Avoid contact with moving parts. Keep hands and utensils out of the blending cup while blending to prevent injury.
• Ne mélangez pas de liquides chauds, car l'accumulation de pression peut faire éclater le récipient.
• Ensure the blade assembly is securely attached to the cup and the cup is properly locked onto the motor base before operating.
• Do not operate the blender if the blade assembly is damaged or if the motor base has been dropped or damaged.
• Use only NutriBullet authorized accessories and replacement parts.
• Unplug the USB charging cord when not in use and before cleaning.

Ce qui est inclus

Your NutriBullet GO Cordless Blender package includes:

• (1) Motor Base
• (2) 13oz Cups
• (2) To Go Lids
• (1) Blade Cover
• (1) Cordon de chargement USB
• User Guide with Recipes

Image: All components included with the NutriBullet GO Cordless Blender.

Installation

Charger la batterie

1. Connect the USB charging cord to the charging port on the motor base.
2. Plug the other end of the USB cord into a compatible USB power adapter (not included).
3. The indicator light will illuminate during charging. A full charge provides up to 20 blending cycles.

Image: The motor base of the NutriBullet GO Cordless Blender, illustrating the power button and indicator light.

Assemblée

1. Assurez-vous que la base du moteur est complètement chargée.
2. Fill the 13oz cup with your desired ingredients. Do not exceed the MAX fill line.
3. Securely twist the blade assembly onto the cup until it is tightly sealed.
4. Invert the cup and blade assembly, then align it with the motor base. Twist clockwise until it locks into place.

Mode d'emploi

Mélange

1. After assembly, press the power button on the motor base to begin blending.
2. The blender will run for a preset cycle. For optimal results, blend in short bursts.
3. Avoid blending continuously for more than 30 seconds to prevent overheating.
4. If the blender stops, gently shake the unit to redistribute ingredients and restart.

Image: The NutriBullet GO Cordless Blender with ingredients inside, demonstrating its use.

Après le mélange

1. Once blending is complete, twist the cup counter-clockwise to remove it from the motor base.
2. Carefully unscrew the blade assembly from the cup.
3. Attach a To-Go Lid for immediate consumption or storage.

Video: A demonstration of how to use the NutriBullet GO Cordless Blender, including assembly and blending.

Entretien et nettoyage

Cleaning the Blade and Cups

1. Immediately after each use, rinse the blade assembly and cups with warm water and mild soap.
2. Utilisez une brosse pour nettoyer soigneusement le pourtour des lames.
3. The cups and lids are top-rack dishwasher safe.

Nettoyage du socle du moteur

1. Essuyez la base du moteur avec de l'annonceamp tissu.
2. Ne jamais immerger le socle du moteur dans l'eau ou tout autre liquide.
3. Assurez-vous que le port de charge est sec avant de charger.

Dépannage

Blender ne s'allume pas :

• Assurez-vous que la base du moteur est complètement chargée.
• Verify the cup and blade assembly are securely twisted onto the motor base. The blender has a safety mechanism that prevents operation if not properly assembled.

Les ingrédients ne se mélangent pas correctement :

• Ajoutez plus de liquide au mélange.
• Coupez les ingrédients plus gros en morceaux plus petits.
• Do not overfill the cup beyond the MAX line.
• Blend in shorter bursts and gently shake the unit.

Le voyant est rouge :

• This may indicate overheating. Allow the unit to cool down for at least 15 minutes before attempting to blend again.
• It could also indicate a low battery. Recharge the unit.

Caractéristiques

Informations sur la garantie

The NutriBullet GO Cordless Blender comes with a limited warranty. Please refer to the warranty card included in your package or visit the official NutriBullet webConsultez le site pour connaître les conditions générales détaillées. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Assistance clientèle

For further assistance, product registration, or to purchase accessories, please visit the official NutriBullet website ou contacter le service client.

Officiel Website: www.nutribullet.com