Manuel d'utilisation du kit de suspension pneumatique TORQUE

Produit terminéview

The TORQUE Airbag Air Bag Suspension Kit (Model TR2400AS) is designed to enhance the load-carrying capacity, stability, ride quality, and braking effectiveness of your vehicle. This kit provides adjustable air support to maintain optimal vehicle height and performance, especially when towing or carrying heavy loads. It serves as a direct OEM replacement for Firestone Ride Rite W21-760-2400 systems.

Image: Complete TORQUE Airbag Air Bag Suspension Kit, including air bags, brackets, and hardware, alongside its retail packaging.

Informations sur l'équipement

This air helper spring kit is specifically designed for the following vehicle models and years:

• 2005-2007 Ford F250 (4WD only)
• 2005-2007 Ford F350 (4WD only)

Note: This kit is NOT compatible with vehicles equipped with an in-bed hitch.

Image: Visual representation of compatible Ford F-Series trucks and specific fitment years (2005-2007 F250/F350 4WD only).

Principales caractéristiques et avantages

• Load Leveling Support: Provides up to 5,000 lbs of load leveling capacity, ensuring your vehicle remains level even with heavy loads.
• Qualité de conduite améliorée : Reduces inter-leaf friction and softens contact between the axle and frame, minimizing bottoming out.
• Stabilité améliorée : Maximizes the vehicle's safe load-carrying capacity and improves overall stability.
• Better Braking Effectiveness: Contributes to more effective braking performance under load.
• Construction durable : Air inlets are made from 4140 grade steel, offering 25% more durability compared to OEM 1040 grade steel. Air springs are designed to withstand up to 500 PSI, though 100 PSI is the recommended maximum for safer and more comfortable rides.
• Direct OEM Replacement: Directly replaces Firestone Ride Rite W21-760-2400.

Image: Illustration demonstrating the 5,000 lbs load leveling capacity provided by the air suspension system.

Image: Visual comparison showing a truck towing a trailer without and with Torque Parts Suspension, highlighting improved load leveling and reduced sag.

Contenu du kit

The TORQUE Airbag Air Bag Suspension Kit includes all necessary components for a complete installation:

• 2 x Air Bags
• All necessary Brackets
• Manuel d'installation
• All required Bolts and Nuts
• Inflation Valves
• Raccords coudés
• Tubes

Image: A detailed layout of all components included in the kit: two air bags, various brackets, bolts, nuts, air lines, and inflation valves.

Vidéo : Un overview of the TORQUE Air Bag Suspension Kits, showcasing the components and highlighting their benefits for various vehicle uses like towing and off-roading.

Instructions d'installation

The TORQUE Airbag Air Bag Suspension Kit is designed for a straightforward, bolt-on installation without requiring any frame drilling. Please refer to the included detailed installation manual for step-by-step instructions specific to your vehicle model.

Étapes générales d'installation :

1. Préparer le véhicule : Park the vehicle on a level surface, engage the parking brake, and block the wheels. Lift the rear of the vehicle and support it with jack stands.
2. Supprimer les composants existants (le cas échéant) : Follow the manual to remove any existing components that may interfere with the installation of the air springs.
3. Installer les supports : Position and secure the upper and lower brackets to the vehicle's frame and axle, respectively. The brackets are designed for a no-drill installation.
4. Install Air Springs: Mount the air bags between the upper and lower brackets. Ensure proper alignment and secure attachment using the provided bolts and nuts.
5. Connecter les lignes aériennes : Attach the elbow fittings to the air bags and connect the tubing. Route the tubing away from hot or moving parts to the inflation valves.
6. Installer les valves de gonflage : Choose a convenient and protected location (e.g., bumper, wheel well) to install the inflation valves. Connect the air lines from the air bags to these valves.
7. Vérifiez les fuites : Inflate the air springs to a low pressure (e.g., 20 PSI) and check all connections for air leaks using a soapy water solution. Tighten connections as needed.
8. Véhicule inférieur : Carefully lower the vehicle off the jack stands.
9. Ajustement final : Inflate the air springs to the desired pressure based on your load requirements.

Always consult the comprehensive installation manual provided with your kit for detailed, model-specific instructions and safety precautions.

Mode d'emploi

The TORQUE Airbag Suspension Kit allows you to adjust the air pressure to suit varying load conditions, optimizing ride height and comfort.

Réglage de la pression d'air :

• Minimum PSI: 5 PSI (livres par pouce carré)
• Pression maximale (PSI) : 100 PSI

Use an air compressor to inflate the air springs via the installed inflation valves. Monitor the pressure with a gauge. Adjust pressure as follows:

• Light Load/Unloaded: Maintain minimum pressure (5 PSI) for optimal ride comfort.
• Charge lourde/Remorquage : Increase air pressure gradually until the vehicle achieves a level stance. Do not exceed 100 PSI.
• Conduite hors route : Adjust pressure as needed for terrain, ensuring not to exceed maximum or fall below minimum.

Proper air pressure ensures even tire wear, improved handling, and prevents bottoming out of the suspension.

Entretien

Regular maintenance of your TORQUE Airbag Suspension Kit will ensure its longevity and optimal performance.

• Inspection régulière : Inspectez régulièrement les coussins gonflables, les conduites d'air et les raccords afin de déceler tout signe d'usure, de dommage ou de fuite.
• Vérifier la pression de l'air : Check air pressure regularly, especially before and after towing or hauling heavy loads. Adjust as necessary.
• Nettoyer les composants : Veillez à ce que les coussins gonflables et les composants environnants soient exempts de saleté, de débris et de substances corrosives.
• Avoid Over-Inflation/Under-Inflation: Always adhere to the minimum (5 PSI) and maximum (100 PSI) pressure limits to prevent damage to the air springs.
• Couple de serrage des fixations : Periodically check and re-torque all fasteners to ensure they remain secure.

Dépannage

Here are solutions to common issues you might encounter with your air suspension kit:

Questions fréquemment posées :

Q: Will it fit if my vehicle is lifted front and rear?
A: If the front of the truck is lifted, it will fit. If the rear of the truck is lifted, you may need a spacer. Please refer to the spacer table below.

You can search for spacers by part number.

Q: Will it fit if my vehicle is lowered?
A: No, it will NOT fit if your vehicle is lowered.

Q: What should be the minimum and maximum PSI?
A: Minimum is 5 PSI. Maximum is 100 PSI.

Q: Can I use a cradle?
A: Yes, you can use a cradle with this kit. Our cradle part number is TR3004. You can search the cradle by part number.

Image: A graphic detailing frequently asked questions regarding vehicle lift, lowering, PSI limits, and cradle compatibility, including a spacer selection table.

Caractéristiques

Garantie et assistance

For warranty information and technical support, please refer to the documentation included with your product or visit the official Torque webVous pouvez également contacter le service client via le revendeur auprès duquel vous avez acheté le produit.

Pour plus de ressources et d'informations sur les produits, consultez le site web. Torque Store on Amazon.