TOPTES TS-301 Digital Anemometer Instruction Manual

1. Introduction

The TOPTES TS-301 Digital Anemometer is a versatile instrument designed for accurate measurement of wind speed, temperature, and relative humidity. This device is suitable for a variety of applications, including outdoor activities like sailing, drone flying, and golf, as well as indoor environmental assessments such as HVAC system analysis.

2. Contenu de la boîte

• 1x TS-301 Digital Anemometer
• 1x Manuel d'utilisation
• 1 x sac de rangement
• 3 piles AAA

Image: The TOPTES TS-301 Digital Anemometer, user manual, storage bag, and three AAA batteries as packaged.

3. Principales caractéristiques

• 2.26-inch LCD Backlit Screen: Provides clear and easy-to-read measurements in various lighting conditions.
• Plusieurs unités de mesure : Measures wind velocity in m/s, km/h, ft/s, ft/m, knots, and mph.
• Capteur de température et d'humidité : Equipped to measure wind temperature (-4.0°F to 140.0°F) and relative humidity (0.0%~99.9%RH).
• Modes MAX/MIN/AVG : Allows for tracking maximum, minimum, and average wind speed readings.
• Fonction de conservation des données : Temporarily freezes the current display reading for convenient recording.
• Arrêt automatique: Automatically shuts down after 10 minutes of inactivity to conserve battery life.
• Léger et portable : Compact design for easy one-handed operation and pocket storage.

4. Installation

4.1 Installation de la batterie

1. Locate the battery compartment on the back of the anemometer.
2. Ouvrez le couvercle de la batterie.
3. Insérez trois (3) piles AAA, en veillant à respecter la polarité (+/-).
4. Fermez soigneusement le couvercle de la batterie.

Image: The TOPTES TS-301 Digital Anemometer, showing its front display and fan.

5. Mode d'emploi

5.1 Mise sous/hors tension

Appuyez sur le Pouvoir bouton () to turn the device on. To turn it off, press and hold the Pouvoir button. The device will automatically power off after 10 minutes of inactivity.

Écran rétroéclairé de 5.2 pouces

Appuyez longuement sur le Backlight/Hold bouton () for 2 seconds to activate the backlight. Long press again to turn it off.

5.3 Fonction de maintien des données

Appuyez brièvement sur le Backlight/Hold bouton () to freeze the current reading on the display. Press again to release the hold function.

5.4 Sélection de l'unité de vitesse du vent

Appuyez sur le UNITÉ button to cycle through the available wind speed units: meters per second (m/s), kilometers per hour (km/h), feet per second (ft/s), feet per minute (ft/m), knots, and miles per hour (mph).

5.5 Sélection de l'unité de température

Appuyez sur le ° C / ° F bouton pour basculer l'affichage de la température entre Celsius (°C) et Fahrenheit (°F).

5.6 Modes MAX/MIN/AVG

Appuyez sur le MAX/MIN bouton pour view the maximum, minimum, or average wind speed recorded since the device was powered on or the mode was reset. Cycle through the modes by repeatedly pressing the button.

Image: The anemometer's display showing various measurements and button functions.

6. Applications

The TOPTES TS-301 is designed for diverse applications:

• Activités de plein air : Ideal for sailing, windsurfing, drone flying, kite flying, boating, frisbee, golf, and shooting to assess local weather conditions and wind impact.
• Indoor Airflow Assessment: Useful for HVAC systems, vents, dust collectors, and heat registers to measure air velocity and ensure proper functioning.
• Surveillance environnementale : Provides accurate temperature and humidity readings for various settings.

Image: The anemometer being used in diverse settings such as HVAC, shooting, sailing, golf, and drone operation.

7. Entretien

• Gardez l'appareil propre et sec. Utilisez un soft, damp chiffon pour le nettoyage ; éviter les nettoyants abrasifs.
• Ensure the fan blades are free from obstructions to maintain accurate readings.
• Retirez les piles si l'appareil ne doit pas être utilisé pendant une période prolongée afin d'éviter toute fuite.
• Store the anemometer in its included storage bag to protect it from dust and damage.

8. Dépannage

• Aucun écran/appareil ne s'allume pas : Vérifiez que les piles AAA sont correctement installées et suffisamment chargées. Remplacez-les si nécessaire.
• Inaccurate Wind Speed Readings: Ensure the fan is rotating freely and is not obstructed. Verify that the device is positioned correctly into the airflow.
• Relevés de température/humidité inexacts : Allow at least 30 minutes for the sensors to adjust to a new environment for stable readings.
• L'écran ne répond pas : Essayez de retirer puis de réinsérer les piles pour effectuer une réinitialisation logicielle.

9. Spécifications

10. Garantie et assistance

For warranty information, technical support, or any inquiries regarding your TOPTES TS-301 Digital Anemometer, please refer to the contact details provided in the included User Manual or visit the official TOPTES website.