Introduction
Thank you for choosing the suddus 66ft 200 LED Outdoor String Lights. This manual provides essential information for the safe and effective use of your new fairy lights. These versatile, battery-operated lights are designed to enhance both indoor and outdoor environments with their bright white glow and multiple lighting effects.
Caractéristiques du produit
- Conception imperméable à l'eau: The lights and battery box are IP44 rated, ensuring durability and functionality in wet weather conditions.
- Fonctionnalité de contrôle à distance : Easily switch between 8 lighting modes, adjust brightness, and set a timer with the included remote control.
- Fil de cuivre flexible : The durable copper wire can be bent and shaped to fit various decorative needs without breaking.
- Luminosité réglable : Features 10 adjustable brightness levels to create the desired ambiance.
- Portable et pratique : Battery-operated design eliminates the need for power outlets, offering flexibility in placement.
- Longueur étendue : A generous 66ft (20m) length with 200 LEDs provides ample coverage for large-scale decorations.
Instructions d'installation
- Déballer les lumières : Carefully unroll the string lights from the winding card. Handle the copper wire gently to avoid tangling.
- Installer les piles : Open the battery box. Insert 3 AA batteries (not included) according to the polarity indicators inside the compartment. Close the battery box securely.
- Pile de la télécommande : The remote control typically comes with a pre-installed CR2025 battery. Remove any plastic tab to activate it.
- Placement: Position the lights as desired. The flexible copper wire allows for easy shaping around objects, furniture, or outdoor structures. Ensure the battery box is placed in a location that allows for remote signal reception if using the remote control.

Figure 1: The suddus 66ft 200 LED White Fairy Lights package, including the coiled lights, remote control, and transparent battery box.
Mode d'emploi
Your suddus fairy lights can be operated using the included remote control or the button on the battery box.
Utilisation de la télécommande :
- MARCHE/ARRÊT : Appuyez sur le ON bouton pour allumer les lumières, et le DÉSACTIVÉ bouton pour les éteindre.
- Sélection du mode : Utiliser les boutons 1 à travers 8 to select from the following 8 lighting modes:
- Combinaison
- En vague
- Séquentiel
- Au ralenti
- Chasing/Flash
- Fondu lent
- Scintillement/Flash
- Reste sur
- Réglage de la luminosité : Utilisez le DIM - et DIMINUER + buttons to adjust between 10 levels of brightness.
- Fonction minuterie : Appuyez sur le MINUTEUR button to activate the 6-hour timer. The lights will stay on for 6 hours and then turn off automatically for 18 hours, repeating the cycle daily.
Using the Battery Box Button:
A button on the battery box allows you to cycle through the 8 lighting modes and turn the lights off, providing basic control without the remote.

Figure 2: Detailed illustration of the remote control functions and battery box with battery insertion.
Entretien
- Résistance à l'eau : The IP44 rating means the lights are protected against splashing water from any direction. However, avoid submerging the battery box in water.
- Manutention: The copper wire is flexible but should be handled with care to prevent damage. Avoid excessive pulling or sharp bends.
- Remplacement de la batterie : When lights dim or stop working, replace all 3 AA batteries in the battery box. Ensure correct polarity.
- Stockage: When not in use, gently re-coil the lights onto the winding card to prevent tangling and store them in a cool, dry place.

Figure 3: This image focuses on the waterproof features, showing the IP44-rated battery box and the durable silver copper wire, emphasizing its suitability for outdoor conditions.
Dépannage
- Les lumières ne s'allument pas :
- Check if the AA batteries in the battery box are correctly inserted and not depleted. Replace if necessary.
- Ensure the remote control's battery (CR2025) is functional and the plastic tab has been removed.
- Verify that the ON button on the remote or battery box has been pressed.
- La télécommande ne répond pas :
- Ensure there is a clear line of sight between the remote and the battery box.
- Remplacez la pile de la télécommande (CR2025).
- Lumières qui clignotent ou s'atténuent de façon inattendue :
- This usually indicates low battery power. Replace all 3 AA batteries in the battery box.
- Check the copper wire for any visible damage or breaks.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | suddus |
| Modèle | 200LED White Fairy Lights |
| Longueur | 66 20 pieds (XNUMX XNUMX mètres) |
| Nombre de LED | 200 |
| Couleur claire | Blanc |
| Source d'énergie | Alimenté par piles (3 piles AA requises) |
| Matériel | Cuivre |
| Indice d'étanchéité | IP44 (Battery Box) |
| Méthode de contrôle | Télécommande |
| Modes d'éclairage | 8 |
| Niveaux de luminosité | 10 |
| Fonction de minuterie | 6 heures allumées / 18 heures éteintes |
| Voltage | 4.5 volts |
| Poids de l'article | 3.68 onces |
Garantie et assistance
suddus offers a Garantie 12 mois on this product, ensuring customer satisfaction. If you encounter any issues or have questions regarding your string lights, please do not hesitate to contact our customer support team. We are available 24/7 to assist you.
For support, please refer to the contact information provided with your product packaging or visit the official suddus store on Amazon.





