Introduction
Thank you for choosing the Displays2go Motorized Rolling TV Stand. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new TV stand. Please read all instructions carefully before assembly and use.
Informations importantes sur la sécurité
- Lisez toutes les instructions: Ensure you understand all assembly and operation instructions before use.
- Capacité de poids : Ne pas dépasser la capacité de poids maximale de 265 lb (120 kg).
- Taille de l'écran : This stand is designed for screens between 43" and 100".
- Source d'alimentation : Connect the stand to a grounded power outlet (110V-250V).
- Gestion des câbles: Ensure all cables are properly routed and secured to prevent tripping hazards or damage during movement.
- Verrous pour roulettes : Always engage the caster locks when the stand is in a stationary position to prevent accidental movement.
- Enfants et animaux domestiques : Keep children and pets away from the stand during operation to prevent injury.
- Entretien: Do not attempt to service the motorized components yourself. Refer to qualified service personnel.
Configuration et assemblage
Carefully unpack all components and verify against the parts list (not provided in this document, refer to packaging). Assembly typically involves attaching the base, column, and TV mounting brackets.
1. Assemblage de la base
Attach the four heavy-duty casters to the base frame. Ensure they are securely fastened. Two casters are lockable; position them for easy access.
2. Column Installation
Mount the motorized column onto the assembled base. Follow the specific instructions provided with your hardware kit to ensure proper alignment and secure attachment.
3. TV Mounting Bracket Attachment
Attach the VESA-compatible mounting brackets to the back of your television. Refer to your TV's manual for appropriate screw sizes and mounting points. The stand supports VESA sizes up to 800x600.
Image: The TV stand's mounting brackets are visible, ready for television attachment. This image shows the stand without a TV, highlighting the VESA mounting plate and the motorized column.
4. Montage du téléviseur
Carefully lift your television and hook the attached brackets onto the stand's mounting plate. Secure the TV using the provided safety screws or clips. Ensure the TV is level and stable.
Image: The motorized TV stand with a large television securely mounted in a vertical viewposition de départ.
5. Connexion électrique
Connect the power cord to the stand and then to a suitable electrical outlet. The power cord length is 64 inches.
Mode d'emploi
The Displays2go Motorized Rolling TV Stand features remote-controlled height adjustment and tilt functionality.
Fonctions de la télécommande
- Boutons haut/bas : Use these buttons to raise or lower the television screen. The height can be adjusted from 36" to 62".
- Tilt Buttons: Utilisez ces boutons pour régler le viewing angle of the screen, from a vertical position (0°) down to a horizontal table position (90°).
Réglage de la hauteur
Press the "Up" or "Down" buttons on the remote control to move the screen to your desired height. The motorized mechanism will smoothly adjust the display.
Image: Illustration demonstrating the adjustable height feature of the TV stand, showing the screen at different vertical positions.
Réglage de l'inclinaison
Press the "Tilt Up" or "Tilt Down" buttons on the remote control to change the screen's angle. This allows for conversion from a vertical display to an interactive horizontal table.
Image: Illustration demonstrating the adjustable tilt feature, showing the screen transitioning from vertical to a horizontal table-like orientation.
Image: The TV stand with a television fully tilted to a horizontal position, suitable for interactive table use.
Mobilité
To move the stand, unlock the two lockable casters. Carefully push the stand to its new location. Once positioned, engage the caster locks to stabilize the stand.
Vidéo du produit
Video: This video demonstrates the motorized lift and tilt capabilities of the Displays2go Motorized Rolling TV Stand, showcasing its versatility in adjusting screen height and angle.
Entretien
- Nettoyage: Essuyez le support avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les solvants.
- Inspections : Vérifiez régulièrement toutes les fixations et les raccords pour vous assurer qu'ils sont bien serrés et sécurisés.
- Motorized Components: The motorized system is designed for long-term use and generally requires no user maintenance. Do not lubricate or disassemble.
- Casters: Veillez à ce que les roulettes soient exemptes de débris pour assurer un roulement fluide.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Stand does not move (lift/tilt) |
|
|
| Stand moves unevenly or makes unusual noises |
|
|
| Les roulettes ne roulent pas en douceur. |
|
|
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Affiche2go |
| Modèle | DGMLTSBK |
| Overall Width x Depth | 37.5" x 30.0" |
| Height Range (Min. x Max) | 36.0" x 62.0" |
| Poids | 175.0 lb (produit), 219 lb (expédition) |
| Matériel | Acier, acier allié |
| Finition | Revêtement en poudre |
| Type de placement | Debout au sol |
| Orientation | Paysage |
| Caractéristiques | Motorized, Wheels, Tilting, Adjustable Height, Remote Controlled |
| Couleur | Noir |
| Longueur du cordon d'alimentation | 64.0" |
| Quoitage | 260 W |
| Largeur du support de montage | 15.8" (with extenders: 35.5") |
| VESA Taille | Up to 800x600 |
| Min Monitor Size | 43" |
| Taille maximale du moniteur | 100" |
| Type de support | Inclinaison |
| Max Monitor Weight | 265.0 livres |
| ViewAngle d'attaque | 0° - 90° |
| Vol d'entréetage | 110V-250V |
| Puissance de sortie | 24V |
Garantie et assistance
Informations sur la garantie
This product is typically covered by a manufacturer's warranty. Please refer to your purchase documentation or contact Displays2go directly for specific warranty terms and conditions. A 30-day return policy is generally offered for this product.
Assistance clientèle
For technical assistance, missing parts, or any questions regarding your Displays2go Motorized Rolling TV Stand, please contact Displays2go customer support. Contact information can typically be found on the Displays2go website ou votre facture d'achat.
