Aux Cable 3.5mm Adapter User Manual

Produit terminéview

The ATWATEC 3.5mm Aux Cable is a versatile audio cord designed to connect your mobile devices to car stereos, home theater systems, speakers, and any other audio output device equipped with a 3.5-millimeter auxiliary input jack. This cable features a flat, tangle-free design for easy storage and use.

This cable is approximately 3 feet long and is compatible with a wide range of smartphones, tablets, and MP3 players, including various models from iPhone, iPod, iPad, Google Pixel, Samsung Galaxy, LG, HTC, and ZTE.

Instructions d'installation

Setting up your ATWATEC 3.5mm Aux Cable is straightforward. Follow these steps to connect your device:

1. Identifier les ports : Locate the 3.5mm headphone jack on your audio source device (e.g., smartphone, tablet, MP3 player) and the 3.5mm auxiliary input (AUX-in) port on your target audio system (e.g., car stereo, home speaker system).
2. Source de connexion : Insert one end of the ATWATEC 3.5mm Aux Cable into the headphone jack of your audio source device.
3. Connect Target: Insert the other end of the ATWATEC 3.5mm Aux Cable into the AUX-in port of your car stereo, home speaker system, or other audio output device.
4. Sélectionnez Entrée : On your car stereo or home audio system, select the "AUX" or "Auxiliary Input" source.

Image: The ATWATEC 3.5mm Aux Cable, featuring its flat design and male-to-male connectors.

Mode d'emploi

Once the cable is connected, you can begin playing audio from your source device through your connected audio system.

• Lecture audio : Start playing music, podcasts, or any audio content on your smartphone, tablet, or MP3 player. The audio will be routed through the aux cable to your car stereo or home speaker system.
• Contrôle du volume : Adjust the volume primarily on your audio source device. You may also need to adjust the volume on your car stereo or home audio system for optimal sound levels.
• Conception sans enchevêtrement : The flat design of the cable helps prevent tangles, making it easy to coil and uncoil for storage and use.

Entretien et maintenance

To ensure the longevity and optimal performance of your ATWATEC 3.5mm Aux Cable, follow these care and maintenance guidelines:

• Stockage: When not in use, coil the cable neatly. The flat design is intended to prevent tangles, but proper coiling will further extend its life. Avoid sharp bends or kinks.
• Nettoyage: Si le câble se salit, essuyez-le délicatement avec un chiffon doux, sec ou légèrement humidifié.amp Nettoyer avec un chiffon. Ne pas utiliser de produits chimiques agressifs ni de nettoyants abrasifs. S'assurer que les connecteurs sont secs avant utilisation.
• Manutention: Always grasp the connector ends when plugging in or unplugging the cable. Avoid pulling directly on the cable itself, as this can damage the internal wiring or the connection points.
• Environnement: Store the cable in a cool, dry place away from direct sunlight, extreme temperatures, and excessive moisture.

Dépannage

If you encounter issues with your ATWATEC 3.5mm Aux Cable, try the following troubleshooting steps:

• Pas de son :
  • Assurez-vous que les deux extrémités du câble sont complètement insérées dans leurs ports respectifs.
  • Vérifiez le niveau sonore de votre appareil source et de votre système audio.
  • Verify that the audio system is set to the correct input source (AUX or Auxiliary).
  • Test the cable with a different source device and/or audio system to rule out issues with the devices themselves.
• Mauvaise qualité sonore (parasites, distorsion) :
  • Ensure connections are secure and free of debris.
  • Try adjusting the volume on both devices.
  • Check if the issue persists with another audio cable to determine if the problem is with the cable or the devices.
  • Évitez de placer le câble à proximité de sources d'interférences électromagnétiques importantes.
• Câble non compatible :
  • Confirm that both ports are standard 3.5mm auxiliary jacks. This cable is not designed for other port sizes (e.g., 2.5mm, 6.35mm).
  • Remove any bulky phone cases that might prevent the connector from fully seating in the device's port.

Spécifications du produit

Informations sur la garantie

This product is typically covered by a standard return policy. For specific warranty details, please refer to the purchase platform or contact the seller directly. General return policies often allow for returns or replacements within a specified period (e.g., 30 days) from the date of purchase for defective items.

Assistance clientèle

For further assistance, technical support, or inquiries regarding your ATWATEC 3.5mm Aux Cable, please contact the seller or manufacturer directly through the platform where the product was purchased.

Manufacturer: ATWATEC