Manuel d'utilisation du stabilisateur de caméra 3 axes FeiyuTech SCORP-C2

1. Introduction

The FeiyuTech SCORP-C2 is a professional 3-axis handheld gimbal stabilizer designed for DSLR and mirrorless cameras. It provides smooth, stable footage, enhancing your videography experience. This manual provides essential information for setup, operation, maintenance, and troubleshooting.

2. Consignes de sécurité

Please read all safety instructions carefully before use. Improper use may result in damage to the device or personal injury.

• N’exposez pas le cardan à l’eau ou à d’autres liquides.
• Avoid dropping or subjecting the gimbal to strong impacts.
• Tenez le stabilisateur éloigné des sources de chaleur et de la lumière directe du soleil.
• Utilisez uniquement le câble de charge et l'adaptateur secteur spécifiés.
• Ensure the camera is securely mounted and balanced before powering on the gimbal.

3. Produit terminéview

The SCORP-C2 features an integrated underslung handle, quick buckle design for axis locks, an OLED screen, and smart status lights for real-time monitoring.

Figure 1: FeiyuTech SCORP-C2 Gimbal and included accessories.

3.1 Contenu de la boîte

• Feiyu Scorp-C 2 Gimbal x1
• Curseur x1
• Plaque de dégagement rapide supérieure x1
• Support en L (plaque de montage horizontale) x1
• Vis de support d'objectif x1
• Support de lentille x1
• Vis de fixation pour caméra x1
• Clé hexagonale x1
• Trépied x1
• Câble de contrôle de caméra USB-C vers Type-C x1
• Câble de chargement USB-C pour nacelle stabilisée x1

Figure 2 : Détaillé view of the FeiyuTech SCORP-C2 packing list.

3.2 Control Buttons and OLED Screen

The gimbal features an OLED status screen and various control buttons for intuitive operation.

Figure 3 : Plusview of the control buttons and OLED status screen.

4. Installation

4.1 Attaching the Tripod/Handle

Attach the included tripod to the 1/4-inch screw hole at the bottom of the gimbal handle. This provides stability for balancing and can be used as an extended grip.

4.2 Montage de la caméra

Attach the quick release plate to the bottom of your camera using the camera mounting screw. Ensure it is securely tightened. If using a heavier lens, attach the lens support bracket for added stability.

4.3 Équilibrage du cardan

Proper balancing is crucial for optimal performance and to prevent motor strain. Unlock all three axes before balancing.

1. Équilibre de l'axe d'inclinaison : Adjust the camera's position on the quick release plate until it remains level when tilted.
2. Équilibre de l'axe de roulis : Adjust the roll arm until the camera remains level when rotated.
3. Équilibre de l'axe panoramique : Adjust the pan arm until the gimbal remains stable when panned.

After balancing, lock all axes using the quick buckle design. The gimbal should remain stable in any position without motor assistance.

5. Modes de fonctionnement

The SCORP-C2 offers various operating modes to suit different shooting scenarios. Use the mode button (M) and joystick for control.

• Suivi panoramique (PF) : The camera pans left/right following the handle's movement, while tilt and roll axes are locked.
• Suivi panoramique et inclinaison (PTF) : The camera pans and tilts following the handle's movement, while the roll axis is locked.
• FPV (Première personne) View): Les trois axes suivent le mouvement de la poignée, offrant une perspective à la première personne.
• Mode de verrouillage: Les trois axes sont verrouillés, maintenant la caméra pointant dans une direction fixe.
• Mode Sport : Increases motor response speed for fast-moving shots.

6. Fonctionnalités avancées

6.1 Built-in AI Tracking Module

The SCORP-C2 features an advanced AI 4.0 tracking module, eliminating the need for external accessories. It supports gesture recognition and face tracking from up to 59ft away, ideal for solo shooting.

Figure 4: AI Tracking 4.0 capabilities with gesture control and face tracking.

6.2 Native Vertical Shooting

The modular design allows the camera mounting slider to be rotated 90 degrees and secured into the vertical arm, enabling native vertical shooting without additional accessories. This is perfect for social media content creation.

Figure 5: Native vertical shooting setup on the SCORP-C2 gimbal.

6.3 Fast Bluetooth Control

Pair your DSLR or mirrorless camera via Bluetooth to wirelessly start/stop recording or trigger focus instantly with a single press of the shutter button on the gimbal.

6.4 A-B Point Trajectory Memory

Preset two points (A and B) for camera movement paths with customizable speed, angle, and dwell time, enabling precise, repeatable shots.

6.5 Auto Rotation

The gimbal is capable of automatic, smooth rotation, perfect for creative shots like 'Inception' mode.

7. Entretien

• Nettoyage: Use a soft, dry cloth to clean the gimbal. Avoid harsh chemicals.
• Stockage: Store the gimbal in its protective case in a cool, dry place when not in use. Ensure all axes are locked for compact storage.
• Entretien de la batterie: Charge the battery regularly, even if not in use, to maintain battery health. Avoid fully discharging the battery for extended periods.

8. Dépannage

• Le cardan ne s'équilibre pas : Ensure all axes are unlocked during balancing. Recheck camera position and weight distribution.
• Motors vibrating/overheating: This often indicates improper balancing. Rebalance the gimbal carefully.
• Problèmes de connectivité Bluetooth : Ensure the camera's Bluetooth is enabled and the gimbal is in pairing mode. Refer to your camera's manual for specific Bluetooth instructions.
• Unexpected movements: Check for any obstructions or loose connections. Ensure the gimbal firmware is up to date.

9. Spécifications

10. Garantie et assistance

For detailed warranty information, firmware updates, and additional support resources, please visit the official FeiyuTech website. You can also find comprehensive video tutorials and FAQs there.

FeiyuTech officiel Website: Visit the FeiyuTech Store