1. Introduction
The Elcometer 311 FNF Model T is an advanced automotive refinish paint meter designed for fast and accurate measurement of paint thickness on both steel and aluminum substrates. This robust device provides reliable readings in both mils and microns, making it an essential tool for automotive professionals and enthusiasts. Its ergonomic design, durable construction, and wireless connectivity enhance user experience and data management.
This image shows the Elcometer 311 FNF Model T paint meter from the front. The device has an orange and black casing with a digital display showing a measurement of 70 micrometers. Below the screen are several control buttons.
Caractéristiques principales :
- Fast Reading Rate: Achieves 60+ readings per minute, significantly reducing inspection times.
- Dual Unit Measurement: Easily switch between mils and microns with a push of a button.
- Conception robuste : Dust and waterproof equivalent to IP64, suitable for various environmental conditions.
- Écran durable : Scratch, solvent, and water-resistant color display for enhanced protection.
- Confort ergonomique : Designed for maximum comfort during extended use.
- Automatic Display Rotation: Ensures readability on horizontal and vertical surfaces.
- Détecteur de lumière ambiante: Adjusts display brightness for optimal visibility in any lighting.
- Connectivité Bluetooth : Wirelessly connect to inspection apps or ElcoMaster for seamless reporting.
2. Installation
2.1 Déballage
Carefully remove the Elcometer 311 FNF Model T from its packaging. Inspect the device for any signs of damage. Retain the packaging for future storage or transport.
2.2 Installation de la batterie
The Elcometer 311 requires 2 AA batteries, which are included. To install:
- Repérez le couvercle du compartiment à piles à l'arrière de l'appareil.
- Faites glisser ou déclipsez le couvercle pour l'ouvrir.
- Insérez les 2 piles AA en veillant à respecter la polarité (+/-) indiquée à l'intérieur du compartiment.
- Replacez soigneusement le couvercle du compartiment à piles.
2.3 Mise sous tension initiale
Press and hold the power button (usually located centrally below the screen) until the display illuminates. The device will perform a brief self-test before entering measurement mode.
2.4 Connexion Bluetooth
The Elcometer 311 features Bluetooth connectivity for data transfer to compatible inspection apps or ElcoMaster software. To connect:
- Assurez-vous que le Bluetooth est activé sur votre smartphone ou votre tablette.
- Open the ElcoMaster app or your preferred inspection application.
- Follow the app's instructions to search for and pair with the Elcometer 311. The meter's Bluetooth indicator will typically illuminate when connected.
This diagram shows the Elcometer 311 paint meter on the left, with a measurement of 120 micrometers. To its right, a smartphone is displayed, also showing a measurement of 120.0 micrometers, demonstrating the meter's Bluetooth connectivity and data transfer capability to a mobile device.
3. Mode d'emploi
3.1 Prendre une mesure
To obtain an accurate paint thickness reading:
- Vérifiez que le compteur est sous tension.
- Place the probe of the Elcometer 311 firmly and flatly onto the painted surface you wish to measure.
- Hold the meter steady. The reading will appear almost instantly on the display.
- Lift the meter from the surface to prepare for the next reading. The fast reading rate allows for quick successive measurements.
Left: A hand is shown holding the Elcometer 311 paint meter against the silver painted surface of a car, near the headlight. The meter's display shows a reading of 5.5, indicating a paint thickness measurement. Right: This image features a hand holding the Elcometer 311 paint meter against a dark, possibly black, painted surface. The meter's screen clearly shows a reading of 4.5 mils, indicating the paint thickness.
3.2 Changing Measurement Units (Mils/Microns)
The Elcometer 311 allows you to switch between mils and microns. Refer to your device's specific button layout for the 'Units' or 'Mode' button. Typically, a short press of this button will toggle between the two measurement units.
3.3 Comprendre les lectures
The display will show the measured paint thickness. The unit (mils or µm/microns) will be indicated next to the numerical value. The automatic rotating display ensures the reading is always upright, regardless of the meter's orientation. The ambient light sensor adjusts screen brightness for optimal visibility.
The device is designed to operate reliably in both wet and dry conditions due to its IP64 dust and waterproof rating.
4. Entretien
4.1 Nettoyage
The Elcometer 311 features a scratch, solvent, and water-resistant display. To clean the device:
- Essuyez l'extérieur avec un chiffon doux et sec.amp tissu.
- Pour les taches tenaces, utilisez une solution nettoyante douce et non abrasive.
- Avoid using harsh chemicals or abrasive materials that could damage the casing ou affichage.
- Ensure the probe tip is clean and free of debris for accurate measurements.
4.2 Remplacement de la batterie
When the battery indicator on the display shows low power, replace the AA batteries as described in Section 2.2. Always use fresh, high-quality batteries.
4.3 Stockage
Store the Elcometer 311 in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, it is recommended to remove the batteries to prevent leakage.
5. Dépannage
This section addresses common issues you might encounter with your Elcometer 311.
| Problème | Cause possible | Solution |
|---|---|---|
| Le compteur ne s'allume pas. | Piles mortes ou mal installées. | Remplacez les piles en veillant à respecter la polarité. |
| Lectures inexactes. | Dirty probe tip; incorrect calibration; surface irregularities. | Clean probe tip; perform calibration (refer to full manual for calibration steps); ensure surface is clean and flat. |
| Problèmes de connectivité Bluetooth. | Bluetooth not enabled on device/phone; meter out of range; app issues. | Ensure Bluetooth is on for both devices; move meter closer to phone/tablet; restart app or meter. |
| L'écran est sombre ou illisible. | Batterie faible ; conditions d’éclairage extrêmes. | Replace batteries; allow ambient light sensor to adjust, or move to a more suitable lighting environment. |
6. Spécifications
Detailed specifications for the Elcometer 311 FNF Model T:
| Spécification | Détail |
|---|---|
| Fabricant | Elcomètre |
| Marque | Elcomètre |
| Poids de l'article | 5.5 onces (156 grammes) |
| Dimensions du produit | 5.55 x 2.87 x 1.46 pouces (14.1 x 7.3 x 3.7 cm) |
| Numéro de modèle de l'article | 311 |
| Numéro de pièce du fabricant | A311CFNFTI |
| Piles | 2 pile AA requise (incluse) |
| Caractéristiques spéciales | Waterproof (IP64 equivalent) |
| Date de première disponibilité | 7 septembre 2015 |
7. Garantie et assistance
7.1 Informations sur la garantie
Specific warranty terms for the Elcometer 311 FNF Model T are typically provided with the product at the time of purchase or can be found on the official Elcometer website. Please refer to your product documentation or visit the manufacturer's website for detailed warranty coverage and registration information.
7.2 Assistance clientèle
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Elcometer customer support directly. You can find contact information and additional resources on the official Elcometer website:
You may also visit the Elcometer store on Amazon for product information and related accessories: Elcometer Amazon Store