Chamberlain RTXW2-10 Wireless 2-Channel Wall Transmitter

1. Produit terminéview

The Chamberlain RTXW2-10 is a wireless 2-channel wall transmitter designed for convenient control of Chamberlain roller shutter motors. Its modern and attractive design integrates seamlessly into any home environment, allowing for easy operation of individual or multiple roller shutters.

Les principales caractéristiques comprennent :

• Effortless control of roller shutters without manual intervention.
• Two independent channels to operate two individual roller shutters or groups of shutters simultaneously.
• Compatibility with Chamberlain wireless roller shutter drives: RPD10ER-10, RPD15ER-10, RPD25ER-10, and RPD40ER-10.
• Can be used with the RRX1-10 radio receiver as an upgrade kit for common roller shutter motors with mechanical end limits.

Illustration 1 : Avant view of the Chamberlain RTXW2-10 wireless wall transmitter, showing the control buttons for up, down, and stop functions for two channels.

2. Contenu du colis

Veuillez vérifier que tous les articles sont présents dans le colis :

• 1x Chamberlain RTXW2-10 Wall Transmitter
• 1 batterie (préinstallée ou séparée)
• Matériel de montage (vis et chevilles)

3. Consignes de sécurité

Veuillez lire attentivement toutes les instructions avant l'installation et l'utilisation. Conservez ce manuel pour toute consultation ultérieure.

• Sécurité des batteries : Ensure correct battery polarity. Do not mix old and new batteries. Dispose of used batteries responsibly.
• Installation: Install the device in a dry indoor location. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
• Enfants: Gardez l'appareil et ses composants hors de portée des enfants.
• Entretien: N’essayez pas de réparer l’appareil vous-même. Confiez toute réparation à un personnel qualifié.

4. Configuration et installation

4.1 Installation de la batterie

The wall transmitter typically comes with a battery already installed. If not, or if replacement is needed:

1. Carefully open the battery compartment cover on the back of the transmitter.
2. Insert the lithium battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
3. Fermez soigneusement le couvercle du compartiment à piles.

4.2 Mounting the Wall Transmitter

Choose a suitable location for the wall transmitter, typically near the roller shutter it will control, at a convenient height.

1. Separate the front panel from the mounting plate.
2. Hold the mounting plate against the wall at the desired position and mark the drilling points.
3. Percez des trous aux endroits marqués et insérez les chevilles.
4. Fixez la plaque de montage au mur à l'aide des vis fournies.
5. Snap the front panel of the transmitter onto the mounted plate.

Image 2 : Example of a house equipped with roller shutters, illustrating the typical application environment for the wall transmitter.

5. Mode d'emploi

5.1 Pairing with Roller Shutter Motors

Before operating, the wall transmitter must be paired with your Chamberlain roller shutter motor(s) or a compatible radio receiver (e.g., RRX1-10). Refer to the specific pairing instructions for your roller shutter motor or receiver, as the process may vary. Generally, this involves:

1. Activating the programming mode on your roller shutter motor/receiver.
2. Pressing a specific button sequence on the RTXW2-10 transmitter within a short timeframe.
3. Confirming successful pairing (e.g., motor movement or LED indicator).

Note: The RTXW2-10 has two channels. You can pair one motor or a group of motors to Channel 1 and another motor or group to Channel 2.

5.2 Fonctionnement de base

The transmitter features six buttons: two 'Up' arrows, two 'Down' arrows, and two 'Stop' buttons, arranged for two channels.

• Flèche vers le haut (^): Press to raise the roller shutter(s) assigned to that channel.
• Flèche vers le bas (v): Press to lower the roller shutter(s) assigned to that channel.
• Bouton d'arrêt (—): Appuyez pour arrêter le(s) volet(s) roulant(s) dans leur position actuelle.

To switch between channels or operate a specific channel, simply use the corresponding set of buttons.

6. Compatibilité

The Chamberlain RTXW2-10 wall transmitter is compatible with the following Chamberlain wireless roller shutter drives:

• Chamberlain RPD10ER-10
• Chamberlain RPD15ER-10
• Chamberlain RPD25ER-10
• Chamberlain RPD40ER-10

Additionally, it can be used as an upgrade kit in conjunction with the Chamberlain RRX1-10 radio receiver to control common roller shutter motors that have mechanical end limits.

7. Entretien

7.1 Remplacement de la batterie

When the transmitter's range decreases or it becomes unresponsive, the battery may need replacement. Follow the steps in Section 4.1 for battery installation. Use a new lithium battery of the same type.

7.2 Nettoyage

Clean the surface of the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

8. Dépannage

• L'émetteur ne répond pas :
  • Vérifiez la batterie. Remplacez-la si nécessaire.
  • Ensure the transmitter is within range of the roller shutter motor/receiver.
  • Re-pair the transmitter with the motor/receiver (refer to Section 5.1).
• Roller shutter moves erratically:
  • Check for any obstructions in the roller shutter's path.
  • Verify that the motor's end limits are correctly set (refer to your motor's manual).
• Only one channel works:
  • Ensure both channels are correctly paired with their respective motors/groups.
  • Vérifiez le niveau de la batterie.

9. Spécifications

10. Garantie et assistance

Chamberlain products are designed for reliability and performance. For warranty information, please refer to the documentation provided with your purchase or visit the official Chamberlain website. For technical support, troubleshooting assistance, or to inquire about spare parts, please contact Chamberlain customer service through their official channels.

Veuillez conserver votre preuve d'achat pour les réclamations au titre de la garantie.