Manuel d'utilisation de la télécommande OBSBOT Tiny 2

Introduction

La télécommande OBSBOT Tiny 2 est conçue pour améliorer votre expérience avec la gamme OBSBOT Tiny. webcams, including Tiny 2 Lite, Tiny 2, Tiny 4K, Tiny 1080P, Tiny SE, and the OBSBOT UVC to HDMI Adapter 2nd Gen. This smart remote provides intuitive control over various camera functions and AI features, offering a more convenient and pleasant usage experience.

It combines the functionality of a remote control with a presentation clicker, allowing for seamless control during video calls, live streaming, and presentations.

Contenu du colis

• OBSBOT Tiny 2 Remote Control
• USB Receiver Dongle (stored inside the remote's battery compartment)
• User Guide/Instructions

Installation

1. Installation de la batterie

1. Ouvrez le couvercle du compartiment des piles au dos de la télécommande.
2. Insérez deux piles AAA en respectant la polarité (+/-).
3. Fermez le couvercle du compartiment à piles.

2. Connexion du récepteur USB

1. Locate the USB receiver dongle inside the remote's battery compartment.
2. Plug the USB receiver dongle into an available USB 2.0 or higher port on your computer.

3. Software Setup (OBSBOT TinyCam)

1. Ensure your OBSBOT Tiny series webcam is connected to your computer and the OBSBOT TinyCam software is running.
2. Navigate to the settings within the OBSBOT TinyCam software.
3. Scroll down to find the "Remote Control" option and enable it.
4. La télécommande devrait maintenant être appairée et prête à l'emploi.

Mode d'emploi

Disposition et fonctions de la télécommande

Image: Detailed diagram illustrating the buttons and their corresponding functions on the OBSBOT Tiny 2 Remote Control.

• Bouton d'alimentation : Turns the connected OBSBOT Tiny series webcaméra allumée ou éteinte.
• Boutons directionnels : Control the pan and tilt of the webcame.
• Bouton de réinitialisation : Resets the camera's position to its default (square zero).
• Device Selection Buttons (Left/Right Arrows): Allows switching control between multiple connected OBSBOT devices (if connected to the same computer).
• Boutons de zoom avant/arrière : Ajustez le niveau de zoom de la caméra.
• P1, P2, P3 Buttons: Preset buttons to save and recall specific camera positions and zoom levels.
• Bouton de suivi : Toggles Human Tracking on/off. Disables Auto Zoom by default.
• Bouton de gros plan : Activates Close-up mode, turning on Human Tracking and Auto Zoom simultaneously.
• Bouton de main : Toggles Hand Tracking on/off.
• Bouton Mode Bureau : Active/désactive le mode bureau.
• Bouton tableau blanc laser : Hold to enable the laser pointer. Double-click to execute or exit Whiteboard Close-up. Note: The laser cannot irradiate the eyes; it will cause serious eye damage.
• Bouton Lien hypertexte : Cliquez pour sélectionner un lien hypertexte. Double-cliquez pour ouvrir le lien hypertexte. Appuyez longuement pour basculer entre les fenêtres ouvertes.
• Bouton Page suivante : Click to page down. Long press to execute or exit a black screen.
• Bouton Page précédente : Click to page up. Long press to execute or exit full screen.

Remarque importante : Some keys on the remote controller will not work with OBSBOT Tiny 4K and OBSBOT Tiny, as the features controlled by those keys (e.g., Close-up, Hand, Laser-Whiteboard, Desk Mode) are not integrated into those specific models.

Contrôle vocal

The OBSBOT Tiny 2 webcam supports voice control for various functions, including waking up the device, initiating tracking, and adjusting zoom. Refer to the OBSBOT TinyCam software settings for a full list of voice commands and to enable/disable this feature.

Applications

Video Meetings: Control your camera's focus and framing during online conferences.

Remote Classes: Utilize presentation clicker features and camera control for engaging online teaching.

Diffusion en direct : Adjust camera angles and zoom on the fly for dynamic broadcasts.

Entretien

• Keep the remote control clean and dry. Use a soft, dry cloth for cleaning.
• Avoid exposing the remote to extreme temperatures or direct sunlight.
• Si la télécommande n'est pas utilisée pendant une période prolongée, retirez les piles pour éviter les fuites.
• Store the USB receiver dongle securely within the remote's battery compartment to prevent loss.

Dépannage

• La télécommande ne répond pas :
  • Vérifiez que les piles sont correctement installées et suffisamment chargées. Remplacez-les si nécessaire.
  • Ensure the USB receiver dongle is securely plugged into your computer.
  • Verify that the "Remote Control" option is enabled in the OBSBOT TinyCam software settings.
  • Restart the OBSBOT TinyCam software and/or your computer.
• Specific features not working:
  • Confirm that your OBSBOT webcam model supports the specific feature (e.g., Close-up, Desk Mode). Refer to your webcam's manual for compatibility.
  • Ensure your OBSBOT TinyCam software and webcam firmware are up to date.
• Ingérence:
  • Avoid using the remote near strong electromagnetic interference sources.

Caractéristiques

Garantie et assistance

For warranty information, technical support, or further assistance, please visit the official OBSBOT webou contactez directement leur service client. Conservez votre reçu d'achat pour toute réclamation sous garantie.