FLYLINKTECH CF700

Manuel d'utilisation du démarreur de voiture FLYLINKTECH 2500A (puissance maximale) 24000mAh avec compresseur d'air (modèle CF700)

Modèle: CF700

Introduction

Thank you for choosing the FLYLINKTECH Car Jump Starter with Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Produit terminéview

The FLYLINKTECH CF700 is a multi-functional device combining a powerful jump starter, a 150 PSI air compressor, a 24000mAh power bank, and an emergency LED light. It is suitable for all gas engines and diesel engines up to 8.0L.

FLYLINKTECH Jump Starter with Air Compressor and accessories in a carrying case

Figure 1: What's in the Box - The jump starter unit, smart jumper cables, air hose with various nozzles, USB charging cable, and carrying case.

Caractéristiques principales

FLYLINKTECH Portable Jump Starter with icons for Battery Starter, 150PSI, Power Bank, LED Light, Preset, Tire Compressor

Figure 2 : Plusview of the multi-functional features of the device.

Consignes de sécurité

Always follow these safety guidelines to prevent injury or damage to the device and vehicle:

FLYLINKTECH Jump Starter Smart Protection System with icons for Short Circuit, High Temperature, Reverse Connection, Low Temperature, Surge Voltage, haut voltage, Over Discharge Protection

Figure 3: The device incorporates multiple safety protections for user and vehicle safety.

Installation

Charger l'appareil

Before first use, fully charge the jump starter. Use the provided USB-C charging cable to connect the device to a compatible USB power adapter (not included). The digital display will indicate the charging status. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.

Mode d'emploi

1. Démarrage rapide d'un véhicule

  1. Assurez-vous que le démarreur électrique est suffisamment chargé.
  2. Connect the smart jumper cables to the jump starter's jumping port.
  3. Fixez le cl rougeamp à la borne positive (+) de la batterie du véhicule.
  4. Fixez le cl noiramp à la borne négative (-) de la batterie du véhicule. Le cl intelligentamp will indicate a safe connection (e.g., green light).
  5. Démarrez le moteur du véhicule.
  6. Une fois le moteur démarré, retirez immédiatement le clamps from the battery, then disconnect the smart jumper cables from the jump starter.
FLYLINKTECH Jump Starter connected to a car battery with jumper cables, showing 'Jump Start Your Car in Seconds'

Figure 4: Proper connection for jump starting a vehicle.

Video 1: Demonstration of jump starting a vehicle using a similar device. The video shows connecting the clamps to the battery and starting the car.

2. Gonflage des pneus

  1. Screw the air hose into the designated port on the jump starter.
  2. Attach the air hose nozzle securely to the tire valve stem.
  3. Turn on the device and select the desired pressure unit (PSI, BAR, KPA).
  4. Use the '+' and '-' buttons to set the target tire pressure.
  5. Appuyez sur le bouton de démarrage pour lancer le gonflage. Le compresseur s'arrêtera automatiquement une fois la pression préréglée atteinte.
  6. Disconnect the air hose from the tire valve and then from the jump starter.
FLYLINKTECH Jump Starter inflating a car tire, showing '150PSI Powerful Tire Inflator'

Figure 5: The device connected to a car tire for inflation.

Video 2: A seller demonstration of the car jump starter's air compressor function, showing how to connect and inflate a tire.

3. Utilisation comme batterie externe

Connect your electronic devices (phones, tablets, etc.) to the USB output ports or car accessories to the DC 12-16.8V / 10A port for charging.

FLYLINKTECH Jump Starter charging a laptop and phone, showing '24000mAh Portable Power Bank'

Figure 6: The device being used to charge multiple electronic devices.

4. Utilisation de la lumière LED

Press and hold the light button to turn on the LED light. Short presses will cycle through different modes: stable light, SOS signal, and strobe light. Press and hold again to turn off.

FLYLINKTECH Jump Starter with bright emergency LED light, showing 'Emergency Light'

Figure 7: The device's LED light providing illumination in a dark setting.

Entretien

Dépannage

ProblèmeCause possibleSolution
Device does not turn on/chargeBattery completely depleted or charging cable/adapter faulty.Ensure charging cable and adapter are working. Try a different charging source. Allow sufficient time for initial charge.
Le véhicule ne démarre pas avec des câbles de démarrage.Clé incorrecteamp connection, insufficient device charge, or vehicle battery severely damaged.Chèque clamp polarity and ensure secure connection. Fully charge the jump starter. Consult a mechanic if vehicle battery is beyond jump-starting.
Le compresseur d'air ne gonfle pasAir hose not securely attached, incorrect pressure setting, or device not powered on.Ensure air hose is tightly screwed in and nozzle is secure on valve. Verify pressure setting and device power.
Air compressor stops prematurelyPreset pressure reached (automatic shut-off).This is normal operation. Check the current tire pressure.

Caractéristiques

Garantie et assistance

Ce produit est livré avec un 24-Months Global Warranty. FLYLINKTECH is committed to providing Life Time After-sale Service & Technical Support. For any inquiries or assistance, please contact FLYLINKTECH customer service.

Documents connexes - CF700

Préview Manuel d'utilisation du démarreur et compresseur d'air FLYLINKTECH CF700
Manuel d'utilisation complet du FLYLINKTECH CF700, un démarreur portable de 2 500 A et un compresseur d'air de 150 PSI. Comprend les caractéristiques, les spécifications, le guide d'utilisation et les consignes de sécurité pour une utilisation automobile.
Préview Manuel d'utilisation du démarreur de batterie FLYLINKTECH CF900
Manuel d'utilisation du démarreur de batterie FLYLINKTECH CF900. Ce guide fournit des instructions sur la présentation, le fonctionnement, la charge, la liste des pièces, les spécifications techniques, la FAQ, les avertissements et les informations de garantie.
Préview Manuel d'utilisation du chargeur de secours FLYLINKTECH BD20
Manuel d'utilisation complet du chargeur portatif FLYLINKTECH BD20, détaillant la présentation du produit, les instructions d'utilisation, la charge, le démarrage assisté, le dépannage, les spécifications techniques et les informations sur la garantie. Il comprend également des avertissements de sécurité et des instructions de mise au rebut.
Préview Manuel d'utilisation du chargeur de secours FLYLINKTECH BD10
Manuel d'utilisation complet du chargeur de secours FLYLINKTECH BD10, détaillant ses caractéristiques, son fonctionnement et ses consignes de sécurité. Découvrez comment l'utiliser comme chargeur de secours, chargeur de secours et lampe torche LED.
Préview Manuel d'utilisation du démarreur de secours étanche FLYLINKTECH 12 000 mAh
Manuel d'utilisation complet du démarreur de secours étanche FLYLINKTECH 12 000 mAh. Découvrez ses principales caractéristiques, ses spécifications, son fonctionnement, ses consignes de sécurité et son dépannage pour un démarrage et une recharge fiables de votre véhicule.
Préview Manuel d'utilisation du chargeur de secours FLYLINKTECH BD10
Manuel d'utilisation complet du démarreur de batterie externe FLYLINKTECH BD10, couvrant la disposition du produit, le guide d'utilisation, les instructions de charge, le démarrage d'un véhicule, les spécifications, les avertissements, l'entretien, la FAQ et les informations de conformité.