Case CA52826

Manuel d'instructions

Case XX 52826 Brilliant Green Smooth Bone Handle 2 Blade Canoe Folding Knife

Introduction

This manual provides comprehensive instructions for the safe and effective use, maintenance, and care of your Case XX 52826 Brilliant Green Smooth Bone Handle 2 Blade Canoe folding knife. Crafted with precision and designed for durability, this knife is suitable for various outdoor activities including hunting, camping, and general utility tasks. Please read this manual thoroughly before using your knife to ensure proper handling and longevity.

Case XX 52826 Canoe knife with two blades open, showing the brilliant green smooth bone handle.

Figure 1: The Case XX 52826 Canoe knife with both blades extended, highlighting its brilliant green smooth bone handle and polished stainless steel blades.

Installation et inspection initiale

Upon receiving your Case XX Canoe knife, perform the following steps:

  1. Déballage : Carefully remove the knife from its packaging. Retain packaging for future storage or transport if desired.
  2. Inspection visuelle : Examine the knife for any signs of damage or manufacturing defects. Check that the blades open and close smoothly and that the handle is securely attached.
  3. Familiarisation: Handle the knife to become accustomed to its weight, balance, and feel. Identify the main blade and the smaller pen blade.
  4. Nettoyage: Before first use, wipe down the blades and handle with a clean, dry cloth to remove any residual manufacturing oils or dust.

Mode d'emploi

The Case XX Canoe knife features two folding blades designed for various cutting tasks. Always exercise caution when handling any sharp instrument.

Opening the Blades:

  • Locate the nail nick on the side of the desired blade (main blade or pen blade).
  • Using your thumbnail, gently pull the blade outwards from the handle until it fully extends and locks into place. The slipjoint mechanism holds the blade open through spring tension.

Closing the Blades:

  • Hold the knife firmly.
  • Carefully push the back of the blade towards the handle, overcoming the spring tension. Ensure your fingers are clear of the blade's path as it folds into the handle.
  • Confirm the blade is fully seated within the handle before storing.

Précautions de sécurité :

  • Toujours coupé de votre corps.
  • Keep blades sharp; dull blades are more dangerous as they require more force and can slip.
  • Never use the knife as a pry bar, screwdriver, or hammer.
  • Store the knife in a closed position when not in use.
  • Tenir hors de portée des enfants.
Case XX 52826 Canoe knife closed, showing its compact size and 3.625 inch length.

Figure 2: The Case XX 52826 Canoe knife in its closed position, illustrating its compact form factor and overall length of 3.625 inches (92.08 mm).

Entretien

Proper maintenance ensures the longevity and performance of your Case XX knife.

Nettoyage:

  • Après chaque utilisation : Wipe the blades and handle with a clean, damp cloth to remove dirt, debris, or moisture. Dry thoroughly immediately.
  • Nettoyage en profondeur: For more thorough cleaning, use mild soap and water. Lavage à la main seulement. Avoid harsh chemicals or abrasive cleaners. Rinse thoroughly and dry completely.
  • Bone Handle Care: The smooth bone handle can be wiped clean. Avoid prolonged exposure to water or extreme temperatures, which can cause the bone to crack or discolor.

Lubrification:

  • Apply a small drop of light machine oil or mineral oil to the pivot points of the blades periodically, especially after cleaning or if the action feels stiff.
  • Open and close the blades several times to distribute the oil, then wipe off any excess.

Affûtage:

  • Maintain a sharp edge using a quality sharpening stone or system.
  • Follow the manufacturer's instructions for your sharpening tool to achieve the correct blade angle.

Stockage:

  • Store the knife in a dry environment to prevent rust.
  • Consider using a knife sheath or pouch for protection during storage and transport.

Dépannage

ProblèmeCause possibleSolution
Blade feels stiff or difficult to open/close.Accumulation of dirt/debris in the pivot, lack of lubrication.Clean the pivot area thoroughly and apply a small amount of lubricant.
Blade has rust spots.Exposure to moisture, improper drying after use/cleaning.For light rust, use a fine abrasive pad or rust remover designed for stainless steel. Ensure thorough drying after each use. Store in a dry environment.
Blade does not hold an edge well.Needs sharpening, improper sharpening technique.Sharpen the blade using a quality sharpening system. Ensure correct angle is maintained.
Handle material appears dry or dull.Manque d'entretien, exposition à des conditions sèches.Apply a small amount of mineral oil or specialized bone handle conditioner with a soft cloth. Buff gently.

Caractéristiques

FonctionnalitéDétail
MarqueCas
Nom du modèleCanoë
Numéro de modèle de l'articleCA52826
Matériau de la lameAcier inoxydable
Matériau de la poignéeBone (Brilliant Green Smooth Bone)
Longueur de la lame2.63 pouces
Longueur de l'article (fermé)3.63 pouces
Poids de l'article0.035 onces
Dossier spécialPliable
Utilisations recommandéesChasse, C.amping, Activités de plein air
Instructions d'entretien du produitLavage à la main seulement
Code UPC021205528267

Garantie et assistance

Case knives are known for their quality craftsmanship. For specific warranty information regarding your Case XX 52826 Canoe knife, please refer to the official Case website or contact their customer support directly. General inquiries about product care or usage can also be directed to their support channels.

Fabricant Website: caseknives.com

Documents connexes - CA52826

Préview Lame de bulldozer pour pelle hydraulique CASE CX80C : caractéristiques et performances
Spécifications détaillées, données de performance et capacités de levage de la pelle hydraulique CASE CX80C avec lame de bulldozer, certifiée Tier 4 Final. Comprend le moteur, la transmission, le système hydraulique, l'environnement de l'opérateur, les dimensions et les caractéristiques techniques.
Préview Manuel d'utilisation des chargeuses-pelleteuses CASE 580E et 580S Construction King | JI Case
Manuel d'utilisation complet pour les chargeuses-pelleteuses CASE 580E et 580S Construction King. Ce manuel couvre la sécurité, le fonctionnement, l'entretien et les spécifications techniques. Fourni par JI Case.
Préview Manuel d'entretien de la chargeuse-pelleteuse Case 580 Super E
Manuel d'entretien complet pour la chargeuse-pelleteuse Case 580 Super E, couvrant la maintenance, le dépannage et les spécifications de tous les principaux systèmes, y compris le moteur, le carburant, l'électricité, les freins, l'hydraulique et la transmission.
Préview Pelle hydraulique CASE CX80 : Caractéristiques et spécifications
Découvrez la pelle hydraulique CASE CX80, une machine puissante et polyvalente conçue pour divers travaux de construction et d'aménagement de chantier. Ce document détaille son moteur, son système hydraulique, le confort de sa cabine, son châssis, ses accessoires, ses performances, ses dimensions et ses équipements de série et en option.
Préview CASE 580K Construction King Loader Backhoe Parts Catalog - Find Parts & Diagrams
Official parts catalog for the CASE 580K Construction King Loader Backhoe. Features detailed illustrations, part numbers, and indexes for maintenance and repair. Issued February 1989.
Préview Guide des produits Case 2020 : Découvrez des couteaux et des couverts de qualité
Découvrez le guide des produits 2020 de WR Case & Sons Cutlery Company, présentant une vaste sélection de couteaux de poche, de couteaux de chasse et de coutellerie fabriqués aux États-Unis. Consultez les spécifications détaillées et découvrez l'histoire de Case.tage.