1. Introduction
The Easythreed K1 Mini 3D Printer is an entry-level 3D printer designed for beginners, including children and teens. It offers a compact design, ease of use, and reliable performance for creating three-dimensional models. This manual provides essential information for setting up, operating, and maintaining your 3D printer.
Figure 1.1: The Easythreed K1 Mini 3D Printer, showcasing its compact design and a printed vase on the build plate.
2. Contenu de la boîte
Upon unboxing your Easythreed K1 Mini 3D Printer, please ensure all the following components are present:
- Easythreed K1 Mini 3D Printer Unit
- Adaptateur secteur
- Manuel de l'utilisateur (ce document)
- Test PLA Filament (small quantity)
- TF Card (includes assembly video, sample files, and software)
3. Configuration et assemblage
The Easythreed K1 Mini 3D Printer is designed for quick and easy assembly, typically taking around 5 minutes. It consists of three main parts that need to be connected.
3.1 Assemblage initial
- Retirez soigneusement tous les matériaux d’emballage.
- Connect the main components as indicated in the assembly video provided on the TF card.
- Assurez-vous que toutes les connexions sont sécurisées avant de continuer.
3.2 Chargement des filaments
The printer uses 1.75mm PLA or TPU filament. To load filament:
- Place the filament spool onto the designated holder.
- Gently feed the filament into the extruder's input hole until it catches.
- Use the 'Feed' button on the printer's control panel to automatically draw the filament into the nozzle. Wait until molten filament extrudes from the nozzle, indicating it's ready.
Figure 3.1: Key features including Dual Z Axis Design, Upgraded Extruder, Removable Magnetic Plate, and Easy Operating buttons.
4. Mode d'emploi
Operating the Easythreed K1 is straightforward with its intuitive controls.
4.1 Nivellement du lit (Étape cruciale)
Proper bed leveling is the most critical step for successful prints.
- Press the 'Home' button on the control panel. The print head will automatically move to its home (zero) position.
- Once the nozzle touches the magnetic plate, immediately disconnect the power. This prevents the nozzle from pressing too hard.
- Adjust the distance between the nozzle and the magnetic plate at four points (A, B, C, D) on the build platform. The correct distance should be approximately the thickness of a single piece of paper.
- If the nozzle is too close, it can damage the magnetic plate. If it's too far, the print will not adhere.
Figure 4.1: Visual guide for the bed leveling process, showing correct and incorrect nozzle distances.
4.2 Printing Your First Model
- Ensure the TF card with your desired model file is inserted into the printer's TF card slot. The printer will print the latest model file if multiple are present.
- Press the 'Start Printing' button. The printer will begin heating the nozzle and then commence printing.
- Monitor the initial layers to ensure proper adhesion to the build plate.
- Once printing is complete, wait for the print to cool down before carefully removing it from the removable magnetic plate. The flexible plate makes removal easy.
Figure 4.2 : Examples of various models that can be printed with the Easythreed K1 Mini 3D Printer.
4.3 Software and Slicing
The printer comes with its own design and slicing software on the supplied TF card. For more advanced users, Ultimaker Cura is recommended, and a profile file for import is provided.
Figure 4.3 : Plusview of modeling software for advanced users, slicing software for intermediate users, and massive printable models for beginners.
5. Entretien
Un entretien régulier assure la longévité et les performances optimales de votre imprimante 3D.
- Nettoyer la buse : Periodically clean any filament residue from the nozzle using a soft brush or cloth.
- Nettoyer le plateau de construction : After each print, ensure the magnetic build plate is clean and free of debris.
- Serrez les vis : Due to vibrations during printing, screws may loosen over time. Periodically check and tighten all screws, especially on the frame and moving parts.
- Stockez correctement le filament : Store filament in a dry, cool place to prevent moisture absorption, which can affect print quality.
6. Dépannage
Voici quelques problèmes courants et leurs solutions :
| Problème | Cause possible | Solution |
|---|---|---|
| L'impression ne colle pas au lit | Improper bed leveling, dirty build plate, incorrect print settings (e.g., first layer height) | Re-level the bed carefully (refer to Section 4.1), clean the build plate, adjust first layer settings in slicing software. |
| Pas d'extrusion de filament | Nozzle clogged, filament tangled, incorrect temperature | Clear nozzle clog, untangle filament, ensure correct printing temperature for PLA (typically 180-210°C). |
| Poor print quality (layers separating, rough surface) | Incorrect temperature, print speed too high, filament quality, loose components | Adjust temperature, reduce print speed, try new filament, check and tighten screws. |
| L'imprimante émet des bruits inhabituels | Loose screws, worn bearings, fan issues | Check and tighten all screws, inspect moving parts for obstruction or wear. |
7. Spécifications
Detailed technical specifications for the Easythreed K1 Mini 3D Printer:
- Dimensions du produit : 25D x 26.5L x 28H centimètres
- Poids de l'article : 1.4 kilogrammes
- Building Size (Print Volume): 100 x 100 x 100 mm (4" x 4" x 4")
- Compatibilité des filaments : PLA et TPU de 1.75 mm
- Précision d'impression : 0.1 mm
- Diamètre de la buse : 0.4 mm
- Extruder Heating Time: Reaches 180°C in 3 minutes
- Plaque de construction : Removable Magnetic Plate
- Consommation électrique (en mode marche) : 30 watts
- Couleur: Rouge, Noir
Figure 7.1: Dimensions of the Easythreed K1 Mini 3D Printer.
8. Garantie et assistance
Easythreed is committed to providing excellent pre-sales and after-sales service. If you encounter any quality problems with the product, including damage to parts during use, or damage due to transportation, we will replace the affected parts or the entire product free of charge.
Should you experience difficulties with leveling or achieving successful prints, please do not hesitate to contact our support team. We are dedicated to resolving your issues as quickly as possible.
For support, please refer to the contact information provided on the Easythreed official weble site ou la documentation fournie avec votre produit.
