Introduction
The AODELAN E4 is a wireless TTL transmitter designed to synchronize AODELAN radio system flashes with your Nikon camera. It supports TTL (Through-The-Lens) automatic exposure control and manual adjustments, along with High-Speed Sync (HSS) up to 1/8000s. This manual provides essential information for setup, operation, and maintenance.
Produit terminéview et fonctionnalités
The AODELAN E4 flash trigger offers advanced functionality for professional and enthusiast photographers.
- High-Speed Sync (HSS) & TTL Mode: Achieve shutter speeds up to 1/8000s for creative light shaping, even in bright daylight. TTL mode allows for automatic flash exposure.
- Easy Camera Integration: Mounts directly onto your camera's hot shoe for seamless wireless connection with AirTTL flashes. Compatible with various Nikon camera models including D5, D4S, D3S, D3X, D850, D810, D800, Df, D750, D700, D500, D300, D610, D600, D7100, D7000, D5600, D5300, D5200, D3300, D3200.
- 8 Digital Channels & 3 Groups: Control up to 3 groups of flashes per channel using the 2.4 GHz frequency. Operating range up to 330 ft for TTL triggering and 656 ft for normal triggering.
- Commande multifonction : Features include High-Speed Sync, remote control for lamp head, modeling lamp, and energy adjustment, power saving, relay state, and firmware update capability via Micro-USB B port.
- Profoto Compatibility: Wirelessly triggers and manually controls Profoto lights with built-in Air system (A1, A1X, B2, B10, B1X, D1, D2, Pro-10), supporting TTL and HSS.
Ce qui est inclus
- 1x AODELAN Wireless Flash Trigger (E4)
- 1x cordon
- 1x Manuel d'utilisation
Installation
Installation des piles
The AODELAN E4 requires 2 x AAA batteries. Open the battery compartment located on the side of the unit and insert the batteries, ensuring correct polarity.
Montage sur la caméra
Slide the E4's hot shoe mounting foot onto your Nikon camera's hot shoe. Secure it by turning the mounting foot lock lever clockwise until it is firm.
Image: The AODELAN E4 flash trigger securely mounted on a Nikon camera, highlighting the hot shoe connection.
Connecting to Flashes
The E4 wirelessly synchronizes with AODELAN flashes and compatible Profoto lights. Ensure your flashes are set to the correct channel and group as the E4.
Image: The AODELAN E4 trigger on a camera, wirelessly controlling multiple studio flashes in a setup.
Mode d'emploi
Marche/Arrêt
Press and hold the Power Button (usually marked with a power symbol) to turn the unit on or off.
Sélection du mode (TTL/Manuel)
Use the "MODE" button to switch between TTL (Through-The-Lens, Automatic) and M (Manual) modes. In TTL mode, the camera automatically determines flash output. In Manual mode, you control the flash power.
Adjusting Energy/Flash Power
In Manual mode, use the "ENERGY" adjustment buttons (+/-) to increase or decrease the flash power.
Synchronisation haute vitesse (HSS)
The E4 supports HSS up to 1/8000s. This allows you to use wider apertures in bright conditions or freeze fast motion.
Channel and Group Selection
The E4 supports 8 channels and 3 groups (A/B/C). Use the "CHANNEL" and "GROUP" buttons to select the desired settings. Ensure these match your connected flashes.
Image : Une image détaillée view of the AODELAN E4's display, illustrating the various settings for group, energy, mode, sync, and channel.
Contrôle de la lumière de modélisation
Use the "MODEL" button to control the modeling light on compatible flashes.
Flash d'essai
Press the "TEST" button to fire a test flash and check your lighting setup.
Mise à jour du micrologiciel
The Micro-USB B port allows for firmware updates to ensure optimal performance and compatibility.
Entretien
Entretien de la batterie
Replace AAA batteries when the battery indicator shows low power. Remove batteries if the unit will not be used for an extended period.
Nettoyage
Use a soft, dry cloth to clean the unit. Avoid using harsh chemicals or solvents.
Stockage
Store the flash trigger in a cool, dry place away from direct sunlight and extreme temperatures.
Dépannage
Flash non déclenché
- Ensure the E4 is securely mounted on the camera's hot shoe.
- Check that the E4 and the flash units are powered on.
- Verify that the channel and group settings on the E4 match those on the flash units.
- Vérifiez que les paramètres du flash de l'appareil photo sont correctement configurés.
Inconsistent Flash Output
- Check battery levels in both the E4 and the flash units. Low batteries can cause inconsistent performance.
- Ensure there are no obstructions between the E4 and the flash units that could interfere with the wireless signal.
- If using TTL, ensure the camera's metering mode is appropriate for the scene.
Unité ne répondant pas
- Try turning the unit off and then on again.
- Remplacez les piles AAA.
- If issues persist, consider performing a factory reset (refer to the full user manual for specific instructions if available).
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Fréquence | 2.4 GHz |
| Range (Triggering) | Jusqu'à 200 m (656 pi) |
| Range (Remote Control & TTL) | Jusqu'à 100 m (330 pi) |
| Nombre de canaux | 8 channels (1-8) |
| No. of Groups per Channel | 3 groupes (A/B/C) |
| Pouvoir | 2 piles AAA |
| Modes de fonctionnement | TTL (Automatic), M (Manual) |
| Max. Sync Speed (1st/2nd Sync) | 1/250s |
| Max. Sync Speed (HSS) | 1/8000s |
| Antenne | Antenne interne |
| Interface | Multi contacts hot shoe mounting foot x 1; Micro-USB B port x 1 |
| Dimensions | Approx. 91 x 57 x 37mm (3.6 x 2.2 x 1.2 in) |
| Poids | Environ 80 g (2.8 oz) (sans piles) |
Image: A visual representation of the AODELAN E4's dimensions and key specifications.
Vidéos officielles des produits
AODELAN TTL HSS Wireless Flash Trigger Overview
Video Description: This video provides a concise overview of the AODELAN TTL HSS wireless flash trigger, demonstrating its features and compatibility.
Wireless Flash Trigger E2 (Preview)
Description de la vidéo : Une courte pré-vidéoview présentation vidéoasing the Wireless Flash Trigger E2, highlighting its design and basic functionality.
Wireless Flash Trigger, Replace Profoto 901031 Air Remote (Preview)
Description de la vidéo : Une brève présentationview demonstrating the wireless flash trigger as a replacement for the Profoto 901031 Air Remote, focusing on its compatibility.
AODELAN Wireless Flash Trigger Transmitter (Preview)
Video Description: A quick preview of the AODELAN wireless flash trigger transmitter, showcasing its form factor and key controls.
Learn Wireless Flash Trigger Setup and Functions
Video Description: This video guides users through the setup and various functions of the wireless flash trigger, providing practical demonstrations.
Garantie et assistance
For warranty information and technical support, please refer to the official AODELAN webConsultez leur site web ou contactez leur service client. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.
