1. Introduction
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your SpeaKa Professional SP-WMM-200S Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed for monitors and TVs ranging from 13 to 30 inches.
2. caractéristiques du produit
- Aluminum monitor/TV wall mount with multiple articulation points.
- Supports displays from 13 inches (33 cm) to 30 inches (76.2 cm).
- Graduated articulations prevent sudden movements, enhancing stability.
- Lockable design with a rotary knob to secure the arm position.
- Retractable wall plate for quick installation and removal.
- Anti-slip knobs for quick tilt and locking adjustments.
3. Spécifications
| Spécification | Détail |
|---|---|
| Marque | Speaka Professionnel |
| Numéro de modèle | SP-WMM-200S (also SP-9493252) |
| Taille d'écran compatible | 13 - 30 pouces (33 - 76.2 cm) |
| Matériel | Aluminium |
| Type de montage | Support mural |
| Type de mouvement | Pivotant, inclinable |
| Couleur | Various (typically black/dark grey) |
4. Configuration et installation
Avis de sécurité important : Ensure the mounting surface can safely support the combined weight of the mount and your display. Professional installation is recommended if you are unsure about wall types or mounting procedures. Always use appropriate safety gear.
4.1. Contenu du colis
Verify that all components are present before beginning installation. Refer to the product packaging for a detailed list of included hardware.
4.2. Outils requis (non inclus)
- Percer
- Drill bits appropriate for wall type (wood, concrete, brick)
- Stud finder (for wood stud walls)
- Niveau
- Tournevis cruciforme
- Crayon
- Mètre à ruban
4.3. Étapes d'installation
- Préparez le mur : Identify the desired mounting location. For wood stud walls, use a stud finder to locate the center of a stud. For concrete or brick walls, ensure there are no hidden pipes or electrical wires.
- Points de forage marqués : Hold the wall plate of the mount against the wall at the desired height and use a level to ensure it is straight. Mark the drilling points through the holes on the wall plate with a pencil.
- Trous de forage : Drill pilot holes at the marked locations. The size of the drill bit will depend on the wall anchors provided with your mount. Insert wall anchors if required for your wall type.
- Fixer la plaque murale : Secure the wall plate to the wall using the provided screws and a Phillips head screwdriver. Ensure it is firmly attached and level.
- Attach Monitor Plate to Display: Carefully place your monitor face down on a soft, clean surface. Attach the VESA plate (the part that connects to the monitor) to the back of your display using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
- Fixer l'écran à la plaque murale : With assistance, carefully lift the display with the attached VESA plate and hook it onto the wall plate. The retractable design allows for easy engagement. Ensure the display is securely seated.
- Affichage sécurisé : Use the locking mechanism (e.g., screws or safety pins) to secure the display to the wall plate, preventing accidental dislodgement.
Figure 1 : Face avant view of the SpeaKa Professional SP-WMM-200S Monitor Wall Mount, showing the VESA plate and wall attachment.
Figure 2 : Angulaire view of the SpeaKa Professional SP-WMM-200S Monitor Wall Mount, highlighting the articulation points.
5. Mode d'emploi
The SpeaKa Professional SP-WMM-200S wall mount offers flexible positioning for your display.
5.1. Adjusting Tilt
To adjust the vertical tilt angle of your display, loosen the anti-slip knob located on the tilt mechanism. Adjust the display to the desired angle, then tighten the knob firmly to secure it in place. The graduated articulations help maintain stability during adjustment.
Figure 3 : Côté view of the mount, illustrating the tilt adjustment mechanism with its anti-slip knob.
5.2. Adjusting Swivel
To adjust the horizontal swivel angle of your display, gently rotate the display to the left or right. The mount's design allows for smooth pivoting. If the movement is too loose or too stiff, check the rotary knob on the arm and adjust its tension as needed. Tighten the rotary knob to lock the arm in the desired swivel position.
Figure 4 : Face avant view of the VESA plate, which attaches to the monitor, showing the connection point to the articulating arm.
6. Entretien
Un entretien régulier garantit la longévité et le bon fonctionnement de votre support mural.
- Nettoyage: Essuyez le support avec un chiffon doux et sec. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager la finition.
- Vérifier les connexions : Periodically check all screws and bolts to ensure they remain tight. Loose connections can lead to instability or damage.
- Inspecter l'usure : Examine the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.
7. Dépannage
If you encounter issues with your SpeaKa Professional SP-WMM-200S wall mount, refer to the following common problems and solutions:
- Le support semble lâche ou instable :
- Assurez-vous que toutes les vis de fixation murale sont bien serrées.
- Verify that the display is properly seated and locked onto the wall plate.
- Check the tension of the articulation points and rotary knobs; tighten as necessary.
- L'affichage n'est pas de niveau :
- Loosen the VESA plate screws slightly, adjust the display to be level, then re-tighten.
- Ensure the wall plate itself was installed level. If not, minor adjustments may be possible, or re-installation might be required.
- Difficulté à régler l'inclinaison ou la rotation :
- Ensure the anti-slip knobs and rotary knobs are sufficiently loosened before attempting to adjust.
- Do not force adjustments; if movement is stiff, check for obstructions or overtightened locking mechanisms.
8. Garantie et assistance
The SpeaKa Professional SP-WMM-200S Monitor Wall Mount typically comes with a 1-year warranty for parts availability. Please refer to your purchase documentation for specific warranty terms and conditions.
For technical support, missing parts, or warranty claims, please contact your retailer or the SpeaKa Professional customer service department. Keep your proof of purchase handy when contacting support.
