Produit terminéview
The Marmitek Stream T2 Pro is an additional HDMI transmitter designed to extend the capabilities of your Marmitek Stream S2 Pro system. It enables wireless transmission of HD1080p/60 Hz video and audio signals over a range of up to 20 meters. This device supports various wireless display technologies including AirPlay, Miracast, and DLNA, allowing for flexible content sharing from compatible devices.
Image: Marmitek Stream T2 Pro HDMI Transmitter. This image shows the compact, rectangular transmitter unit with an HDMI connector on one end, a small antenna that can be folded up, and a circular button with an LED indicator on the top surface. The sides feature ventilation holes, and a micro-USB port is visible on one side.
Instructions d'installation
Follow these steps to set up your Marmitek Stream T2 Pro transmitter:
- Connexion électrique : Connect the Marmitek Stream T2 Pro to a power source using the provided USB cable. The device can be powered via a USB port on your display or a USB power adapter (not included).
- Connexion HDMI : Plug the HDMI connector of the Stream T2 Pro into an available HDMI input port on your source device (e.g., laptop, game console, media player).
- Couplage avec le récepteur : Ensure your Marmitek Stream S2 Pro receiver is powered on and connected to your display. The T2 Pro transmitter should automatically attempt to pair with the S2 Pro receiver. If pairing does not occur automatically, refer to the S2 Pro receiver's manual for manual pairing instructions, which typically involve pressing a pairing button on both units.
- Sélection de la source : Select the correct HDMI input on your source device to output the signal to the Stream T2 Pro.
- Sélection d'affichage : On your display (TV, projector), select the HDMI input connected to the Stream S2 Pro receiver.
Note: For optimal performance, ensure the transmitter and receiver are within the specified 20-meter range and have a clear line of sight, or minimal obstructions.
Utilisation de l'appareil
Once the Marmitek Stream T2 Pro is successfully paired with its receiver, operation is straightforward:
- Connexion automatique : The transmitter will automatically send the HDMI signal from your source device to the paired receiver.
- Wireless Display Modes:
- Miracast: For Windows and Android devices, enable Miracast (Wireless Display/Screen Mirroring) and select the Marmitek Stream S2 Pro receiver from the list of available devices.
- AirPlay : For Apple devices (iPhone, iPad, Mac), use the AirPlay feature to mirror your screen or stream content to the Marmitek Stream S2 Pro receiver.
- DLNA: Compatible with various devices and media servers for streaming multimedia content.
- Indicateur LED : The LED indicator on the transmitter provides status information (e.g., solid light for connected, blinking for searching/pairing). Refer to the S2 Pro receiver manual for specific LED patterns.
Entretien
To ensure the longevity and optimal performance of your Marmitek Stream T2 Pro, follow these simple maintenance guidelines:
- Nettoyage: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive materials.
- Stockage: En cas de non-utilisation prolongée de l'appareil, rangez-le dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
- Ventilation: Veillez à ce que les orifices de ventilation de l'appareil ne soient pas obstrués afin d'éviter toute surchauffe.
- Manutention: Manipulez l'appareil avec précaution. Évitez de le faire tomber ou de le soumettre à des chocs violents.
Dépannage
If you encounter issues with your Marmitek Stream T2 Pro, consult the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| Aucun signal affiché. |
|
|
| Signal intermittent ou de mauvaise qualité. |
|
|
| Cannot connect via AirPlay/Miracast. |
|
|
Spécifications techniques
| Fonctionnalité | Détail |
|---|---|
| Marque | Marmitek |
| Numéro de modèle | 8392 |
| Type de produit | Additional HDMI Transmitter |
| Résolution maximale | HD1080p/60 Hz |
| Portée sans fil | Jusqu'à 20 mètres |
| Technologie de connectivité | USB, HDMI |
| Type de connecteur | HDMI |
| Communication sans fil | Miracast, AirPlay, DLNA |
| Caractéristiques spéciales | Portable |
| Appareils compatibles | Laptops, various source devices with HDMI output |
| Poids de l'article | 200 gramme |
| Puissance de sortie | 5 watts |
| Services Internet pris en charge | Browser, Netflix (Note: Functionality depends on paired receiver and source device capabilities.) |
Garantie et assistance
Specific warranty information for the Marmitek Stream T2 Pro is not available in the provided product details. Please refer to the official Marmitek webConsultez le site ou votre documentation d'achat pour connaître les conditions générales de garantie détaillées.
For technical support, product registration, or further inquiries, please visit the official Marmitek support page or contact their customer service directly. Contact information can typically be found on the manufacturer's websur le site ou dans l'emballage d'origine du produit.
