Introduction
The Festool Cordless VECTURO Oscillating Multi-Tool is designed for versatile cutting, sanding, and scraping applications. This manual provides essential information for the safe and efficient operation, maintenance, and care of your tool.
The VECTURO OSC 18 HPC 4,0 EI-Set features a StarlockMax® holding system for quick blade changes, a brushless EC-TEC motor for durability, and vibration isolation for user comfort. It operates on an 18V lithium-ion battery system.
Figure 1 : The Festool VECTURO OSC 18 HPC 4,0 EI-Set, including the multi-tool, two 18V battery packs, a rapid charger, various accessories, and a Systainer SYS3 M 187 for storage and transport.
Consignes de sécurité
Always observe general power tool safety guidelines. Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
- Portez un équipement de protection individuelle (EPI) approprié, tel que des lunettes de sécurité, une protection auditive et des gants.
- Assurez-vous que la pièce est bien fixée avant l'opération.
- Gardez vos mains et toutes les parties de votre corps éloignées de la lame oscillante pendant son fonctionnement.
- Débranchez la batterie avant d'effectuer tout réglage, de changer d'accessoires ou de ranger l'outil.
- Use only Festool-approved accessories and replacement parts.
Composants inclus
The Festool VECTURO OSC 18 HPC 4,0 EI-Set includes the following items:
- Vecturo Multi-Tool
- Two BP 18 Li 4.0 Ah HPC-ASI Battery Packs
- TCL 6 Rapid Charger
- OSC-A Adapter
- OSC-AH Position Aid
- OSC-AV Dust Extraction Device
- OSC-TA Depth Stop
- USB 78/32/Bi/OSC Universal Saw Blade
- USB 50/35/Bi/OSC Universal Saw Blade
- HSB 100/Bi/OSC Wood Saw Blade
- Systainer SYS3 M 187
Installation
1. Chargement et installation de la batterie
- Insert the battery pack into the TCL 6 Rapid Charger. The charger's indicator light will show the charging status.
- Une fois complètement chargée, retirez la batterie du chargeur.
- Align the charged battery pack with the battery slot on the VECTURO Multi-Tool and slide it in until it clicks securely into place.
2. Blade Installation (StarlockMax System)
The VECTURO features a keyless StarlockMax® quick-change system for fast and easy blade replacement.
- Assurez-vous que la batterie est retirée de l'outil.
- Press the green lever on the tool head to release the blade holder.
- Align the desired StarlockMax blade with the holder and press it firmly until it clicks into place.
- Verify the blade is securely attached before use.
Figure 2 : Haut view of the tool demonstrating the StarlockMax blade attachment mechanism.
Figure 3 : The VECTURO Multi-Tool with a saw blade securely installed.
3. Accessory Attachment (Dust Extraction, Depth Stop, Position Aid)
Attach optional accessories as needed for specific applications.
- OSC-AV Dust Extraction Device: Slide the dust extraction device onto the tool head until it locks into place. Connect a compatible dust extractor hose for dust-free operation.
- OSC-TA Depth Stop: Attach the depth stop for controlled plunge cuts. Adjust the depth setting according to your requirements.
- OSC-AH Position Aid: Use the position aid for precise guidance during cuts, especially for delicate or intricate work.
Figure 4 : Attaching the OSC-AV Dust Extraction Device to the VECTURO Multi-Tool.
Mode d'emploi
1. Mise sous tension/hors tension et contrôle de la vitesse
- To turn the tool on, press the power switch.
- To turn the tool off, release the power switch.
- The brushless EC-TEC motor features variable speed control. Adjust the speed dial to match the material and application for optimal results.
2. Effectuer des découpes
Always ensure the workpiece is stable and secured. Apply gentle, consistent pressure. The tool's vibration isolation system enhances comfort during extended use.
- Décolletés plongeants : For precise plunge cuts, use the OSC-TA Depth Stop. Position the blade over the desired cutting area and slowly lower the tool into the material.
- Coupe générale : Guide the tool along the cutting line, allowing the blade to do the work. Avoid forcing the tool, which can lead to overheating or damage.
Figure 5 : Demonstrating a controlled plunge cut with the VECTURO Multi-Tool.
Figure 6 : The VECTURO Multi-Tool performing a cut with the OSC-TA Depth Stop attached for accuracy.
Entretien
1. Nettoyage
- After each use, disconnect the battery and clean the tool with a dry cloth.
- Enlevez toute poussière ou débris des ouvertures de ventilation afin d'éviter la surchauffe.
- Periodically clean the blade holder mechanism to ensure smooth operation.
2. Remplacement de la lame
Replace blades when they become dull or damaged to maintain cutting efficiency and safety. Refer to the "Blade Installation" section for detailed steps.
3. Entretien de la batterie
- Rangez les batteries dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
- Do not allow battery packs to fully discharge for extended periods. Recharge them regularly.
- If a battery pack is damaged, discontinue use and replace it with an authorized Festool battery.
Dépannage
This section addresses common issues you might encounter with your Festool VECTURO Multi-Tool.
| Problème | Cause possible | Solution |
|---|---|---|
| L'outil ne démarre pas | Batterie non chargée ou mal installée. | Assurez-vous que la batterie est complètement chargée et correctement insérée. |
| Mauvaises performances de coupe | Dull or incorrect blade. Incorrect speed setting. | Replace blade. Select appropriate speed for the material. |
| Vibrations ou bruits excessifs | Blade not properly secured. Damaged blade. | Vérifiez l'installation de la lame. Remplacez la lame endommagée. |
| L'outil surchauffe | Blocked ventilation. Overloading the tool. | Clean ventilation openings. Reduce pressure and allow tool to cool. |
If you encounter issues not listed here or if solutions do not resolve the problem, contact Festool customer support.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Festool |
| Numéro de modèle | 576590 |
| Source d'énergie | Alimenté par batterie |
| Voltage | 18 volts |
| Type de batterie | Batterie lithium-ion (2 incluse) |
| Type de moteur | EC-TEC sans balais |
| Blade Holder System | StarlockMax® |
| Poids de l'article | 13.58 pounds (with packaging) |
| Dimensions du produit | 15.59 x 11.65 x 7.36 pouces |
| Matériau de la poignée | Thermoplastic Elastomers or Plastic |
| Recommandation de surface | Wood (compatible with various materials depending on blade) |
| Couleur | Dark Gray Or Black |
Garantie et assistance
Informations sur la garantie
All Festool power tools, including the VECTURO OSC 18 HPC 4,0 EI-Set, come with a comprehensive 3-year wear-and-tear warranty. This warranty also includes a 2-day standard repair time et un Garantie de satisfaction de 1 mois.
For detailed warranty terms and conditions, please refer to the official Festool website ou contacter le support client.
Assistance clientèle
For technical assistance, service, or warranty claims, please contact Festool customer support through their official channels. Visit the Boutique Festool sur Amazon ou leur représentant website pour les coordonnées.
