Introduction
This manual provides comprehensive instructions for the Transformers Beast Alliance Bumblebee and Snarlsaber Beast Combiner 2-Pack (Model F4617). Learn how to transform Bumblebee and Snarlsaber between their various modes and combine them to create an armored battle figure. This product is designed for users aged 6 years and up.
Installation
Before beginning, carefully unpack all components from the product packaging. Ensure that both the Bumblebee figure and the Snarlsaber figure are present, along with any included instructions.
Image: Bumblebee and Snarlsaber figures in their original packaging.
Contenu de la boîte :
- 1 x Bumblebee Figure
- 1 x Snarlsaber Figure
- Fiche d'instructions (reportez-vous à ce manuel pour les étapes détaillées)
Inspect both figures for any manufacturing defects or missing parts upon unboxing. If any issues are found, please refer to the 'Support' section.
Mode d'emploi
This section details the transformation steps for both figures and their combination.
Bumblebee Transformation: Robot to Vehicle Mode
The Bumblebee action figure converts from robot mode to a licensed Camaro vehicle mode in 7 steps.
Image: Bumblebee figure in robot mode, ready for transformation.
- Fold the robot's feet upwards to align with the lower legs.
- Rotate the waist 180 degrees.
- Collapse the chest section to form the front of the vehicle.
- Fold the arms inward, tucking them into the side panels.
- Bring the back panel forward to complete the vehicle's roof.
- Ensure all panels snap securely into place to form the Camaro.
- Adjust the wheels for proper rolling.
Image: Bumblebee figure transformed into Camaro vehicle mode.
Snarlsaber Transformation: Beast to Armor Mode
The Snarlsaber figure converts from black panther beast mode to an armor mode in 8 steps, designed to attach to Bumblebee.
Image: Snarlsaber figure in black panther beast mode.
- Fold the rear legs forward.
- Collapse the body sections to compact the figure.
- Position the front legs to form weapon-like appendages.
- Adjust the head and tail to integrate into the armor form.
- Ensure all connecting pegs and slots are exposed for attachment.
- The tail may detach during transformation; reattach as needed.
- Verify the armor configuration is stable.
- Prepare the armor for attachment to Bumblebee.
Image: Snarlsaber figure in black panther beast mode, side view.
Combining Bumblebee and Snarlsaber
Once Snarlsaber is in armor mode, it can be attached to Bumblebee in robot mode to create a combined battle figure.
Image: Bumblebee figure with Snarlsaber attached in armor mode, ready for battle.
- Ensure Bumblebee is in robot mode.
- Ensure Snarlsaber is fully transformed into its armor configuration.
- Align the connection points on Snarlsaber (armor mode) with the designated ports on Bumblebee's robot mode.
- Gently press the armor onto Bumblebee until it clicks securely into place.
- Verify the armor is firmly attached and does not easily dislodge.
Image: Bumblebee figure in robot mode and Snarlsaber figure in beast mode, before combination.
Image: Bumblebee and Snarlsaber figures displayed with their packaging, highlighting the combined form.
Image: Back of product packaging illustrating transformation steps for Bumblebee and Snarlsaber.
Entretien
Proper care will ensure the longevity of your Transformers figures.
- Nettoyage: To clean the figures, gently wipe them with a dry or slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive water, as these can damage the paint or plastic.
- Stockage: Store the figures away from direct sunlight, high humidity, and extreme temperatures. Prolonged exposure to these conditions can cause discoloration or material degradation.
- Manutention: Handle figures with care, especially during transformation. Avoid forcing parts, as this can lead to breakage.
Dépannage
Cette section aborde les problèmes courants que vous pourriez rencontrer.
Problème: Snarlsaber's tail detaches easily.
Solution: The tail is designed to be detachable for transformation and combination. If it comes off, simply align the connector and reattach it. Store the tail securely when not in use to prevent loss.
Problème: Figures are difficult to transform or combine.
Solution: Refer to the step-by-step instructions in the 'Operating Instructions' section. Ensure all joints are properly aligned and that you are following the correct sequence. Do not force parts; if a step feels stuck, re-examine the instructions and the figure's current configuration.
Problème: Parts feel loose after repeated transformations.
Solution: Over time, joints may become slightly looser. This is normal wear and tear. If a part becomes excessively loose, contact customer support for potential solutions or replacement options.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Dimensions du produit | 2.38 x 9 x 8 pouces |
| Poids de l'article | 3.56 onces |
| Numéro de modèle de l'article | F4617 |
| Âge recommandé par le fabricant | 6 ans et plus |
| Fabricant | Hasbro |
Garantie
Warranty information for the Transformers Beast Alliance Bumblebee and Snarlsaber Combiner 2-Pack is not explicitly detailed in the provided product information. For specific warranty terms and conditions, please refer to the official Hasbro webconsultez le site ou contactez directement leur service client.
Soutien
For additional assistance, product inquiries, or to report any issues, please utilize the following resources:
- Boutique officielle de la marque : Visitez le Transformers Store on Amazon Pour plus de produits et d'informations.
- Fabricant Website: Consult the official Hasbro website for comprehensive support, FAQs, and contact information.
- Service client: Contact Hasbro customer service directly for personalized support regarding your product.
