1. Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting Slim Adjustable 30W Wallpack (Model SLIM17FA30ADJ). This high-efficiency LED fixture is designed for outdoor use, offering adjustable light distribution and color temperature options to suit various lighting needs. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: RAB Lighting Slim Adjustable 30W Wallpack, showcasing its sleek design and light output area.
2. Consignes de sécurité
Always follow basic safety precautions when installing or working with electrical equipment. Failure to do so may result in serious injury or property damage.
- Débrancher l'alimentation : Ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or any service.
- Électricien qualifié : L'installation doit être effectuée par un électricien qualifié, conformément à toutes les normes électriques nationales et locales.
- Mise à la terre : Properly ground the fixture to avoid electrical shock.
- VoltagCompatibilité : Vérifiez que le volume d'alimentationtage est compatible avec le volume de fonctionnement de l'appareiltage (120-277V).
- Intégrité des installations : Do not operate the fixture if it is damaged. Inspect for shipping damage before installation.
- Utilisation en extérieur uniquement : Ce produit est conçu pour une utilisation en extérieur uniquement.
3. Configuration et installation
The SLIM17FA30ADJ wallpack offers field-adjustable features for optimal performance.
3.1 Montage
The fixture is designed for wall mounting. Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 2.99 lbs).
- Coupez le courant au niveau du disjoncteur.
- Securely attach the mounting plate to the desired outdoor wall location using appropriate hardware (not included).
- Connect the electrical wiring (line, neutral, ground) from the supply to the fixture's corresponding wires. Ensure all connections are secure and insulated.
- Mount the fixture body onto the mounting plate, ensuring a tight seal to maintain its IP65 rating for protection against dust and water jets.
3.2 Field-Adjustable Color Temperature (CCT)
The SLIM17FA30ADJ features an internal switch to select the desired color temperature (CCT) before sealing the fixture. Options include 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White).
- Before final installation, locate the CCT switch inside the fixture.
- Select the desired color temperature by sliding the switch to the corresponding setting.
- Ensure the switch is firmly in place before closing and sealing the fixture.
3.3 Adjustable Cut-off Angle
The fixture allows for adjustment of the light cut-off angle from full cutoff up to 90° in 15° increments. This feature helps direct light precisely where needed and can ensure Dark Sky compliance when set to 0° (full cutoff).
- Refer to the markings on the fixture for angle adjustments.
- Carefully adjust the internal reflector or light engine mechanism to achieve the desired cut-off angle.
- Test the light distribution after adjustment to confirm the setting.
4. Mode d'emploi
The RAB Lighting Slim Adjustable Wallpack is designed for efficient and automatic operation.
4.1 Automatic Operation (Photocell)
The integrated photocell automatically controls the fixture's on/off cycles based on ambient light levels. The light will turn on at dusk and turn off at dawn, providing energy savings.
- Ensure the photocell sensor is not obstructed by debris, dirt, or external light sources, as this may affect its operation.
- No manual intervention is typically required for daily operation once installed.
4.2 Fonctionnalité de gradation
This fixture supports 0-10V dimming. Connect to a compatible 0-10V dimmer switch (sold separately) for adjustable light output.
- Consult the dimmer switch manufacturer's instructions for wiring and operation.
- Ensure proper wiring of the dimming control wires (purple and gray) to the 0-10V dimmer.
5. Entretien
The RAB Lighting Slim Adjustable Wallpack requires minimal maintenance due to its durable construction and LED technology.
- Nettoyage: Nettoyez périodiquement l'extérieur du luminaire avec un chiffon doux et sec.amp Nettoyer avec un chiffon pour enlever la saleté et les débris. Ne pas utiliser de nettoyants abrasifs ni de solvants.
- Inspection: Annually inspect the fixture for any signs of physical damage, loose wiring, or corrosion. Address any issues promptly.
- Photocellule: Veillez à ce que le capteur photoélectrique reste propre et dégagé de toute obstruction afin de garantir un fonctionnement automatique correct.
- Aucune pièce réparable par l'utilisateur : There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the LED module.
6. Dépannage
If you experience issues with your RAB Lighting Slim Adjustable Wallpack, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Le luminaire ne s'allume pas. | No power supply; faulty wiring; photocell obstructed or faulty. | Check circuit breaker/fuse. Verify wiring connections. Clear any obstructions from the photocell. Test photocell function (cover it to simulate darkness). |
| Fixture stays on during the day. | Photocell receiving insufficient light; photocell faulty. | Ensure photocell is not obstructed or in a shaded area. Clean photocell sensor. |
| L'éclairage est irrégulier ou vacillant. | Loose wiring connection; incompatible dimmer (if applicable); internal component issue. | Check all wiring connections. Ensure dimmer is 0-10V compatible. If problem persists, contact customer support. |
| Température de couleur incorrecte. | Commutateur CCT mal réglé. | Turn off power, open fixture, and verify/adjust the CCT switch setting. |
Si les étapes de dépannage ne résolvent pas le problème, veuillez contacter le service client de RAB Lighting.
7. Spécifications
| Attribut | Valeur |
|---|---|
| Marque | Éclairage RAB |
| Numéro de modèle | SLIM17FA30ADJ |
| Quoitage | 30 watts |
| Voltage | 120-277 Volts |
| Type de source lumineuse | DIRIGÉ |
| Température de couleur (CCT) | Field Selectable: 3000K, 4000K, 5000K |
| Rendement lumineux | 3540/3813/3768 Lumens (depending on CCT) |
| Efficacité | Jusqu'à 130 lumens par watt |
| Atténuation | Norme de gradation 0-10 V |
| Indice de protection IP (Ingress Protection) | IP65 (Étanchéité à la poussière, protection contre les jets d'eau) |
| Matériel | Precision Die Cast Aluminum |
| Couleur | Bronze |
| Poids de l'article | 2.99 livres |
| Dimensions du produit | 9.25 x 9.06 x 6.5 pouces |
| Code UPC | 192552004435 |
8. Garantie et assistance
RAB Lighting stands behind the quality of its products.
8.1 Informations sur la garantie
For detailed warranty information, please refer to the official RAB Lighting website or the warranty card included with your product. General warranty terms typically cover defects in materials and workmanship under normal use.
8.2 Assistance clientèle
If you have any questions, require technical assistance, or need to report an issue, please contact RAB Lighting customer support:
- Website: www.rablighting.com
- Téléphone: Se référer à la website pour les numéros de contact régionaux.
- When contacting support, please have your product model number (SLIM17FA30ADJ) and purchase date available.
