Manuel d'utilisation des capteurs photoélectriques sans fil PHOTON

Produit terminéview

The Centurion PHOTON infrared barrier photoelectric sensors are designed to provide an integral safety element for automated gate systems. The wireless transmitter, powered by two AA alkaline batteries, eliminates the need for extensive trenching and cabling, offering significant installation flexibility and reducing material and labor costs. This system ensures reliable operation and enhanced perimeter security for your property.

Image: Two Centurion Photon wireless photoelectric sensors, showcasing their sleek black design and compact form factor. These sensors are key components for automated gate safety systems.

Image: The Centurion Photon sensors are depicted in a composite image, highlighting their role in enhancing home security and safety, particularly for families with children, by preventing accidents at automated gates.

Caractéristiques principales

• Émetteur sans fil: Battery-operated transmitter saves time and installation costs.
• Longue durée de vie de la batterie : Approximately 2 years of battery life using two AA alkaline batteries (included).
• Plage de fonctionnement étendue : Up to 30 meters (98 feet) operating range, suitable for various gate sizes.
• Durable Casing: Ant-proof and weather-resistant housing ensures reliability in diverse environmental conditions.
• Commentaires audibles : Transmitter provides audible feedback for easy setup and low battery indication.
• Faible consommation d'énergie : Designed for energy efficiency across the entire system.
• Mode d'installation : Features an installer mode with audible feedback for simplified alignment.
• Conception compacte : Elegant and attractive construction, only 50mm wide.
• Intruder Detection Compatibility: Compatible with intruder detection alarms for enhanced perimeter security.

Configuration et installation

Proper installation is crucial for the optimal performance and safety of your PHOTON sensors. Follow these guidelines carefully.

Liste de contrôle avant l'installation

• Ensure all components are present: Transmitter unit, Receiver unit, mounting hardware, 2 x AA alkaline batteries.
• Verify the gate area is clear of obstructions and suitable for sensor mounting.
• Confirm power supply (12V) is available for the receiver unit.

Montage des capteurs

1. Choose a suitable mounting location on stable, vertical surfaces on either side of the gate opening. The sensors should be mounted at the same height, typically between 0.5m and 1m from the ground.
2. Securely attach the mounting brackets to the chosen surfaces using appropriate fasteners.
3. Mount the receiver unit on one side and the transmitter unit on the opposite side, ensuring they face each other directly.
4. Insert the two AA alkaline batteries into the transmitter unit.
5. Connect the receiver unit to the 12V power supply and the gate automation system's safety input terminals, following the gate system's specific wiring diagram.

Procédure d'alignement

The PHOTON sensors feature an installer mode with audible feedback to assist with precise alignment.

1. Activate the installer mode on the transmitter (refer to the specific button/switch on the device, usually a small button on the side or back).
2. Adjust the angle of both the transmitter and receiver units until a continuous audible tone is heard from the transmitter. This indicates optimal alignment.
3. Once aligned, secure the sensors firmly in place.
4. Test the alignment by passing an object (e.g., your hand) through the beam path. The audible tone should stop, and the gate system's safety input should register the interruption.

Mode d'emploi

Once installed and aligned, the PHOTON sensors operate automatically as a safety device for your automated gate.

Fonctionnement normal

• The infrared beam continuously transmits between the receiver and transmitter.
• When the beam is uninterrupted, the gate automation system operates normally.
• If an object or person breaks the infrared beam while the gate is closing, the sensors will signal the gate automation system to stop or reverse, preventing potential injury or damage.
• The sensors are designed for continuous operation and require no user intervention during normal use.

État de la batterie

The transmitter unit provides an audible indication for low battery levels. When you hear intermittent beeps from the transmitter during normal operation, it indicates that the batteries are nearing the end of their life and should be replaced promptly.

Entretien

Regular maintenance ensures the longevity and reliable operation of your PHOTON sensors.

Nettoyage

• Periodically inspect the sensor lenses for dirt, dust, spiderwebs, or other obstructions.
• Clean the lenses gently with a soft, damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
• Ensure the area around the sensors is clear of vegetation or debris that could block the beam.

Remplacement de la batterie

• When the transmitter indicates a low battery (audible beeps), replace both AA alkaline batteries immediately.
• Open the battery compartment on the transmitter unit.
• Retirez les anciennes piles et jetez-les conformément aux réglementations locales.
• Insérez deux piles alcalines AA neuves en respectant la polarité.
• Fermez soigneusement le compartiment à piles.
• After battery replacement, it is recommended to re-check the sensor alignment.

Test de fonctionnalité

• Regularly test the sensors by activating the gate and intentionally breaking the beam with an object (e.g., a cardboard box) to ensure the gate stops or reverses as expected.
• Perform this test at least once a month.

Dépannage

If you experience issues with your PHOTON sensors, refer to the following common problems and solutions.

Caractéristiques

Garantie et assistance

For warranty information and technical support, please contact Centurion Systems directly or refer to their official website.

• Fabricant: CENTURION SYSTEMS
• Website: www.centsys.com
• Produit ASIN: B09FNTBFCL

When contacting support, please have your product model number (PHOTON1V2) and ASIN (B09FNTBFCL) ready for faster assistance.