ETA Falco Smart Robot Vacuum Cleaner with Mopping Function User Manual

1. Introduction

Thank you for choosing the ETA Falco Smart Robot Vacuum Cleaner with Mopping Function. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before using the product and keep it for future reference.

Informations importantes sur la sécurité

• Veillez toujours à placer le robot sur une surface stable et plane.
• Gardez l'appareil à l'abri de l'eau et de l'humidité.
• Ne laissez pas les enfants ou les personnes non autorisées utiliser le robot.
• Use only the original charging adapter and accessories provided.
• Before cleaning or maintenance, ensure the robot is powered off and unplugged from the charging station.
• Avoid operating the robot near open flames or flammable materials.

2. Produit terminéview

Composants et commandes

Familiarize yourself with the main parts and controls of your ETA Falco Smart robot vacuum cleaner.

Image 2.1: Top panel controls. This image shows the main control panel on the top of the robot, including buttons for power, scheduling, and return to charging station, along with a digital display.

Image 2.2: Dessous view. This image displays the bottom of the robot, highlighting the main brush, two side brushes, and the mop attachment.

Image 2.3: Underside diagram. This diagram labels the key components on the robot's underside, including the side brushes, main brush, and mop attachment.

3. Contenu du colis

Lors du déballage, veuillez vous assurer que tous les éléments suivants sont présents :

• ETA Falco Smart Robot Vacuum Cleaner
• Borne de Recharge
• Adaptateur de charge
• Télécommande
• 2x Spare Side Brushes
• Special Rotary and Lamella Brush
• 2x Cleaning Cloths (Mop Pads)
• Filtre HEPA de rechange
• Mop Attachment with 300 ml Water Tank
• Mur virtuel

4. Installation

4.1 Charge initiale

1. Placez la station de recharge contre un mur dans un espace dégagé, en veillant à ce qu'il n'y ait aucun obstacle à moins d'1 mètre sur les côtés et à moins de 2 mètres devant.
2. Connect the charging adapter to the charging station and plug it into a power outlet.
3. Place the robot vacuum cleaner on the charging station. Ensure the charging contacts align. The robot will begin charging automatically. A full charge takes approximately 5 hours.

4.2 Installation des brosses latérales

Attach the side brushes to the designated posts on the underside of the robot by pressing them down until they click into place. Ensure the 'L' and 'R' markings on the brushes match the corresponding markings on the robot.

4.3 Connecting to the ETA SMART App

The ETA SMART app enhances the functionality of your robot. Download the app from your smartphone's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network and pair it with the app.

4.4 Setting up the Virtual Wall

The virtual wall creates an invisible barrier to restrict the robot's access to certain areas. Place the virtual wall device on the floor where you want to create a boundary. Ensure the infrared beam is directed towards the area you wish to block. The robot will detect this beam and avoid crossing it.

Image 4.1: Robot with charging station and virtual wall. This image shows the robot positioned near its charging station, with a virtual wall device placed nearby to illustrate its function.

5. Mode d'emploi

5.1 modes de nettoyage

The ETA Falco Smart offers four distinct cleaning modes:

• SMART: General cleaning mode for optimal coverage.
• CLASSIQUE: Modèle de nettoyage standard.
• BORD: Nettoie le long des murs et des bords des meubles.
• ENDROIT: Nettoyage ciblé d'une zone spécifique.

You can select these modes via the ETA SMART app or the remote control.

5.2 Planification du nettoyage

Use the ETA SMART app to set a cleaning schedule for your robot. You can program specific times and days for the robot to automatically start cleaning.

5.3 Commande manuelle

You can manually control the robot's movement and functions using the remote control or the ETA SMART app. The app also allows you to monitor cleaning activity, battery charge, and view cleaning routes.

Image 5.1: ETA Smart App features. This image displays the ETA Smart App interface on a smartphone, highlighting features such as remote control, cleaning history, activity monitoring, battery status, cleaning modes (SMART, CLASSIC, EDGE, SPOT), cleaning schedule, mopping intensity control, and suction power adjustment.

5.4 Fonction de nettoyage

1. Fill the 300 ml water tank with clean water. Do not use detergents or cleaning solutions that are not approved for robot vacuums.
2. Attach a clean mop pad to the mop attachment.
3. Slide the mop attachment into the designated slot on the underside of the robot.
4. Lancez un cycle de nettoyage. Le robot aspirera et lavera les sols simultanément.

6. Entretien

Un entretien régulier garantit des performances optimales et prolonge la durée de vie de votre aspirateur robot.

6.1 Nettoyage du bac à poussière et du filtre

1. Appuyez sur le bouton de déverrouillage du bac à poussière et retirez le bac à poussière.
2. Ouvrez la poubelle et videz son contenu dans une poubelle classique.
3. Remove the HEPA filter and primary filter. Tap them gently to remove dust. If washable, rinse under running water and allow to air dry completely before reinserting.
4. Wipe the inside of the dust bin with a dry cloth.
5. Reassemble the filters and dust bin, then reinsert into the robot.

6.2 Nettoyage de la brosse principale

1. Retournez le robot.
2. Retirez le couvercle principal de la brosse en appuyant sur les languettes de déverrouillage.
3. Retirez la brosse principale.
4. Use the cleaning tool (if provided) or scissors to remove hair and debris tangled around the brush.
5. Clean the brush compartment.
6. Reinsert the main brush and secure the cover.

6.3 Nettoyage des brosses latérales

Periodically check the side brushes for tangled hair or debris. If necessary, remove them by gently pulling upwards and clean them. Replace worn or damaged brushes with the spare ones provided.

6.4 Nettoyage de la lingette et du réservoir d'eau

After each mopping session, remove the mop pad and wash it thoroughly. Empty any remaining water from the water tank and rinse it. Allow both to air dry completely before storing or reusing.

6.5 Nettoyage des capteurs

Wipe the anti-drop sensors, bumper sensors, and charging contacts on the robot and charging station with a clean, dry cloth to ensure proper function.

7. Dépannage

If your robot vacuum cleaner encounters an issue, refer to the following common problems and solutions:

Si le problème persiste après avoir essayé ces solutions, veuillez contacter le support client.

8. Spécifications

Technical specifications for the ETA Falco Smart Robot Vacuum Cleaner (Model ETA251590000):

9. Garantie et assistance

For warranty information, product support, or to inquire about spare parts, please refer to the warranty card included with your purchase or visit the official ETA webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.