Manuel d'utilisation de l'aspirateur robot et laveur de sols 360 S10

Introduction

The 360 S10 Robot Vacuum and Mop is an advanced cleaning device designed to automate floor maintenance. Featuring AI-powered 3D Vision and hidden LiDAR navigation, it offers efficient vacuuming and mopping capabilities for various floor types. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your 360 S10.

Installation

1. Déballage et composants

Retirez soigneusement tous les composants de l'emballage. Assurez-vous que tous les éléments listés ci-dessous sont présents :

• 360 S10 Robot Vacuum and Mop
• Station de chargement
• Power Adapter (with multiple plug types for global use)
• Tampon de nettoyage (x2)
• Réservoir d'eau (capacité de 520 ml)
• Dustbin (500ml capacity, pre-installed)
• Cleaning Tool (for brush maintenance)
• Guide d'utilisation (ce manuel)

Figure 1: Included components of the 360 S10 Robot Vacuum and Mop, showing the main unit, water tank, dustbin, and charging station.

2. Emplacement de la station de recharge

Placez la station de charge contre un mur dans un espace dégagé, en veillant à ce qu'aucun obstacle ne se trouve à moins de 0.5 mètre de chaque côté et à 1.5 mètre devant vous. Branchez l'adaptateur secteur à la station et branchez-la à une prise de courant.

3. Charge initiale

Place the 360 S10 onto the charging dock. Ensure the charging contacts on the robot align with those on the dock. The robot will begin charging automatically. For first-time use, fully charge the robot before operation (approximately 3-4 hours).

4. Installation et connexion de l'application

Download the '360 Robot' app from your smartphone's app store. Follow the in-app instructions to create an account and connect your 360 S10 to your home Wi-Fi network. The app will guide you through the initial mapping process of your home environment.

Mode d'emploi

1. Modes de nettoyage

The 360 S10 offers multiple cleaning modes to suit different needs, adjustable via the mobile app:

• Mode silencieux : Lowest suction for minimal noise, ideal for light cleaning or when you are home.
• Mode standard : Aspiration équilibrée pour un nettoyage quotidien.
• Mode puissant : Increased suction for deeper cleaning on various surfaces.
• Mode maximum : Maximum suction (3300Pa) for stubborn dirt and pet hair.

Figure 2: The 360 S10 operates quietly, making it suitable for homes with pets.

2. Passer l'aspirateur

The robot efficiently vacuums hard floors and carpets. Its ultrasonic sensor automatically identifies carpeted areas and increases suction power for thorough cleaning. For heavily soiled carpet areas, the robot can be set to vacuum twice in a zigzag pattern.

Figure 3: Intelligent Carpet Cleaning feature, where the robot detects carpet and adjusts suction.

3. Nettoyage

Attach the mop pad to the water tank and fill the 520ml water tank. Insert the water tank into the robot. Through the app, you can select from 3 water levels to control discharge. When mopping, the robot automatically configures a No-Mop Zone upon encountering carpets to prevent staining.

4. Évitement des obstacles et navigation

The 360 S10 utilizes AI-Powered 3D Vision and built-in trinocular LiDAR sensors for precise navigation and smart obstacle avoidance. It can detect over 100 types of obstacles, such as power strips, toys, and shoes, quickly bypassing them to prevent entanglement and accidental impact. Six anti-drop sensors prevent the robot from falling down stairs.

Figure 4: AI Powered 3D Vision enables the robot to perceive its environment and avoid obstacles.

Figure 5: The robot's trinocular LiDARs provide three-dimensional obstacle avoidance.

5. Smart Mapping Features

The mobile app provides detailed 2D and 3D maps of your home. You can define specific rooms or areas for cleaning, set custom cleaning sequences, and establish Multi-type No-go Zones to restrict access to certain areas. The robot supports multi-floor mapping, automatically recognizing and switching between different floor plans.

6. Commande vocale

Integrate your 360 S10 with voice assistants like Amazon Alexa or Google Home for convenient hands-free operation. Use simple voice commands to start, stop, or send the robot back to its charging dock.

Entretien

Regular maintenance ensures optimal performance and extends the lifespan of your 360 S10.

1. Vider la poubelle

Open the top cover of the robot and remove the dustbin. Press the release button to open the dustbin and empty its contents into a trash receptacle. The 500ml capacity allows for less frequent emptying.

2. Nettoyage du filtre

Remove the filter from the dustbin. Tap it gently to remove loose debris. The filter is washable; rinse it under running water and allow it to air dry completely before reinserting. Do not use a brush or machine to clean the filter.

3. Nettoyage de la brosse principale

Flip the robot over. Release the main brush cover and remove the main brush. Use the provided cleaning tool to cut and remove any tangled hair or debris. Reinstall the brush and cover.

4. Nettoyage de la brosse latérale

Carefully pull the side brush off its post. Remove any hair or debris. If the brush is damaged, replace it. Push the clean or new side brush back onto the post until it clicks into place.

5. Nettoyage de la lingette de la serpillière

Remove the mop pad from the water tank attachment. The mop pad is washable; rinse it thoroughly and allow it to air dry. Replace the mop pad when it shows signs of wear or reduced cleaning effectiveness.

6. Nettoyage des capteurs

Wipe all sensors (LiDAR, 3D Vision, anti-drop sensors) with a clean, dry cloth to ensure accurate navigation and obstacle detection.

Dépannage

If you encounter issues with your 360 S10, refer to the following common problems and solutions:

• Le robot ne charge pas : Assurez-vous que la station de charge est sous tension et que les contacts de charge du robot sont propres et correctement alignés avec la station.
• Robot stuck or entangled: Clear any obstacles, loose cables, or rugs that may be obstructing the robot's path. Clean the main brush if it's tangled with hair.
• Mauvaises performances de nettoyage : Empty the dustbin, clean the filter, main brush, and side brush. Ensure the water tank is filled and the mop pad is clean for mopping tasks.
• Problèmes de connectivité de l'application : Assurez-vous que votre réseau Wi-Fi est stable et que le robot se trouve à portée. Redémarrez le robot et votre routeur si nécessaire.
• Messages d'erreur : Consult the app for specific error codes and recommended actions.

Caractéristiques

• Marque: 360
• Nom du modèle : S10
• Caractéristiques spéciales : Obstacle Avoidance, Pet Hair Pick Up, Smart Mapping, Intelligent Carpet Cleaning, Smart Mopping, Voice Control
• Couleur: Noir
• Composants inclus : Instruction Guide, Mop Pad, Water Tank
• Type de filtre : Cartouche
• Capacité poubelle : 500 millilitres
• Capacité du réservoir d'eau : 520 millilitres
• Source d'alimentation : Battery Powered (5000mAh battery)
• Run Time (Quiet Mode): Jusqu'à 3 XNUMX heures
• Puissance d'aspiration : 3300Pa
• Méthode de contrôle : Voix, application
• Appareils compatibles : Google Home, Amazon Alexa
• Facteur de forme : Robotique
• Dimensions du produit : 13.78 x 13.78 x 3.35 pouces
• Poids de l'article : 8.47 livres
• Fabricant: 360 Vie intelligente
• Recommandation de surface : Sols durs, moquettes

Garantie et assistance

The 360 S10 Robot Vacuum and Mop comes with a 12-month warranty from the date of purchase. For warranty claims, technical assistance, or customer support, please contact 360 Smart Life customer service. Refer to the contact information provided in the product packaging or on the official 360 Smart Life website.