Introduction
This instruction manual provides comprehensive guidance for the 8Bitdo Media Remote (White Short Edition), designed for seamless media control on your Xbox One, Xbox Series X, and Xbox Series S consoles. This remote offers dedicated media playback buttons, Xbox system navigation, and motion-activated backlighting for enhanced usability.

Image: The 8Bitdo Media Remote in White, Short Edition, showcasing son design compact et la disposition de ses boutons.
Installation
1. Installation de la batterie
The 8Bitdo Media Remote requires two AAA batteries for operation. These are typically included with your purchase.
- Repérez le couvercle du compartiment à piles à l'arrière de la télécommande.
- Faites glisser le couvercle vers le bas pour ouvrir le compartiment.
- Insérez deux piles AAA en respectant la polarité (+ et -).
- Remettez le couvercle du compartiment à piles en place jusqu'à ce qu'il s'enclenche correctement.

Image: A hand demonstrating how to open the battery compartment and insert AAA batteries into the remote.
2. Connexion initiale
The 8Bitdo Media Remote uses infrared (IR) technology. No manual pairing is required. Simply ensure a clear line of sight between the remote's IR emitter (located at the top) and your Xbox console's IR receiver.

Image: A user holding the 8Bitdo Media Remote, pointing it towards an Xbox Series S console, illustrating the line-of-sight requirement for infrared communication.
Mode d'emploi
1. Powering On/Off and Navigation
- Dedicated Home Button: Press the Xbox Home button (located at the top center) to instantly wake your Xbox console.
- Croix directionnelle (D-Pad) : Use the circular D-Pad for navigating menus and selecting items.
- Boutons A/B/X/Y : These colored buttons correspond to standard Xbox controller functions for menu selection and interaction.

Image: The 8Bitdo Media Remote being used to wake an Xbox console, highlighting the dedicated Home button functionality.
2. Commandes de lecture multimédia
The remote features a full suite of media playback buttons:
- Lecture/Pause : Démarrer ou mettre en pause la lecture multimédia.
- Avance/Retour rapide : Skip forward or backward through content.
- Volume haut/bas : Adjust the volume of your media.
- Muet: Couper ou réactiver le son.
3. Motion-Activated Backlight
The buttons on the remote are motion-activated and will illuminate when the remote is picked up or moved, making it easy to use in low-light conditions.
4. OneGuide Button Customization
The OneGuide button (three horizontal lines icon) can be customized to launch a specific application on your Xbox. To configure this:
- On your Xbox, go to Paramètres.
- Accéder à Devices & connections, puis sélectionnez Télécommande multimédia.
- Choose the desired action or app to launch when the OneGuide button is pressed.
5. TV Volume Control (HDMI-CEC)
Your Xbox can control your TV's volume if your TV supports HDMI-CEC (Consumer Electronics Control). To enable this:
- Press the Xbox button on your controller to open the guide.
- Aller à Paramètres > Général > Options de télévision et d'affichage.
- Sélectionner Contrôle de l'appareil > HDMI-CEC and enable all options.
- Consult your TV manufacturer's manual for specific HDMI-CEC settings.
Entretien
1. Remplacement de la batterie
Replace the AAA batteries when the remote's performance diminishes or the backlight becomes dim. Refer to the 'Battery Installation' steps in the Setup section.
2. Nettoyage
Wipe the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or buttons.
Dépannage
- La télécommande ne répond pas :
- Assurez-vous que les piles neuves sont correctement installées.
- Verify a clear line of sight between the remote and your Xbox console. Obstructions can block the infrared signal.
- Confirm your Xbox console is powered on and not in a deep sleep mode that disables IR reception.
- Backlight constantly active:
- The backlight is motion-activated. Any movement will trigger it. This is normal operation.
- If battery life is a concern due to frequent backlighting, consider using rechargeable AAA batteries.
- La commande du volume du téléviseur ne fonctionne pas :
- Ensure your TV supports HDMI-CEC and that it is enabled in your TV's settings.
- Verify HDMI-CEC settings are correctly configured on your Xbox console (Settings > General > TV & display options > Device control > HDMI-CEC).
Caractéristiques
| Modèle | 6922621501848 (White Short Edition) |
| Marque | 8Bitdo |
| Connectivité | Infrarouge (IR) |
| Compatibilité | Xbox Série X, Xbox Série S, Xbox One |
| Source d'énergie | 2 piles AAA (incluses) |
| Dimensions (Short Edition) | 134.25 x 48 x 18.8 mm |
| Poids de l'article | 2.88 onces |

Image: A visual comparison of the 8Bitdo Media Remote in both short and long editions, detailing their respective dimensions.

Image: An illustration showing the 8Bitdo Media Remote's compatibility with Xbox One, Xbox Series X, and Xbox Series S consoles.
Garantie et assistance
8Bitdo is committed to producing high-quality gaming hardware. For specific warranty information, product support, or to access the latest firmware updates, please visit the official 8Bitdo webConsultez leur site web ou contactez directement leur service client. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
Pour obtenir des ressources supplémentaires et des informations sur les produits, vous pouvez consulter le site web suivant : Boutique 8Bitdo sur Amazon.
Produit terminéview Vidéo
Vidéo : Un officiel au-dessusview of the 8Bitdo Media Remote for Xbox One and Xbox Series X|S, demonstrating its features and functionality.





