1. Introduction
1.1 Produit terminéview
The lightmaXX Vega BAT LED is a versatile, battery-powered uplight designed for various lighting applications. It features four 12-watt RGBAWUV (Red, Green, Blue, Amber, White, UV) LEDs, providing a broad spectrum of color mixing capabilities. With an 80W power output, this fixture supports both 6 and 10 DMX channels for precise control in professional setups. Operating modes include automatic programs, sound-activated effects, master/slave configurations, and convenient control via an infrared (IR) remote.
1.2 Consignes de sécurité
- Connectez toujours l'appareil à une prise de courant mise à la terre.
- N’ouvrez pas le boîtier ; il ne contient aucune pièce réparable par l’utilisateur. Confiez toute réparation à un personnel qualifié.
- Évitez l'exposition directe des yeux à la source lumineuse.
- Assurez une ventilation adéquate autour de l'appareil pour éviter toute surchauffe.
- Conservez l'appareil à l'abri de l'humidité et des températures extrêmes.
- Cet appareil doit être relié à la terre.
2. Contenu du colis
Please check that all items listed below are present and in good condition upon unpacking:
- lightmaXX Vega BAT LED 4x12 W RGBAWUV unit
- Télécommande IR
- Câble d'alimentation
- Manuel d'instructions (ce document)
Image 2.1: Power cable with a standard European plug and a blue locking connector for the light fixture.
Image 2.2: Infrared remote control with various color, mode, and numerical buttons for operating the LED spot.
3. Installation
3.1 Charge initiale
Before first use, fully charge the internal battery. Connect the provided power cable to the unit's power input and then to a suitable 240V AC power outlet. The charging indicator (if available on the display) will show the charging status. A full charge typically takes several hours.
3.2 Placement
Position the Vega BAT LED on a stable, flat surface or mount it using appropriate clamps and safety cables (not included) to a truss or stand. Ensure the unit is placed in a location with good air circulation and away from direct heat sources or flammable materials.
3.3 Connexions
For standalone operation, simply power on the unit after charging. For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the Vega BAT LED. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on.
Image 3.1: Bas view of the light fixture showing the power input, DMX ports, and regulatory labels.
4. Fonctionnement
4.1 Panneau de contrôle
The unit features an onboard control panel with a display and four buttons: MENU, DOWN, UP, and ENTER. This panel allows for direct access to settings and operating modes.
Image 4.1: Devant view of the control panel with display and navigation buttons.
Image 4.2: Haut view of the control panel, showing the display and button layout.
- M E N U: Permet de parcourir les options du menu principal.
- VERS LE BAS: Decreases values or navigates down through menu options.
- EN HAUT: Increases values or navigates up through menu options.
- ENTRER: Confirme les sélections ou accède aux sous-menus.
4.2 télécommande infrarouge
The included IR remote control provides convenient wireless operation for various functions, including color selection, mode changes, and power on/off.
- MARCHE/ARRÊT : Allume ou éteint l'appareil.
- R, G, B, A, W, UV: Direct access to Red, Green, Blue, Amber, White, and Ultraviolet colors.
- 0-9: Numerical buttons for selecting specific programs or DMX addresses.
- VOITURE: Active le mode de programmation automatique.
- STROBOSCOPIQUE : Activates strobe effect.
- DISPARAÎTRE: Active le mode de fondu de couleur.
- SON: Active le mode activé par le son.
Modes de fonctionnement 4.3
The Vega BAT LED offers several operating modes:
- Mode automatique : The unit cycles through pre-programmed color changes and effects. Selectable via the control panel or IR remote.
- Mode sonore: The light reacts to ambient sound, creating dynamic effects. Sensitivity can often be adjusted via the control panel.
- Mode maître/esclave : Link multiple units where one acts as the master, controlling all connected slave units. Connect DMX cables in a daisy chain.
- Mode DMX : For professional control using a DMX controller. The unit supports 6 or 10 DMX channels, allowing for granular control over color mixing, dimming, strobe, and internal programs. Set the DMX address via the control panel.
Image 4.3: The light fixture emitting ultraviolet (UV) light.
Image 4.4: The light fixture emitting amber-colored light.
5. Entretien
5.1 Nettoyage
Regularly clean the lens and exterior housing with a soft, lint-free cloth. For stubborn dirt, a slightly damp Un chiffon peut être utilisé. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager la finition ou les composants optiques.
5.2 Entretien de la batterie
To prolong battery life, avoid fully discharging the unit frequently. If storing the unit for an extended period, ensure the battery is charged to approximately 50-70% and recharge it every 3-6 months. Store in a cool, dry place.
5.3 Stockage
When not in use, store the Vega BAT LED in its original packaging or a suitable protective case to prevent damage from dust, moisture, and impacts.
6. Dépannage
- L'appareil ne s'allume pas : Ensure the battery is charged or the power cable is securely connected to a live outlet. Check the power switch.
- No light output: Verify the unit is powered on and not in standby mode. Check selected operating mode and brightness settings.
- IR remote not working: Ensure there are no obstructions between the remote and the unit's IR receiver. Check the remote's battery.
- DMX control issues: Verify DMX cable connections, DMX address settings on the unit, and DMX channel mode. Ensure your DMX controller is functioning correctly.
- L'autonomie de la batterie est courte : The battery may require a full charge cycle. Over time, battery capacity can decrease; consider battery replacement if performance significantly degrades.
7. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | lumièremaXX |
| Modèle | Vega BAT LED 4x12 W RGBAWUV |
| Source de lumière | 4 x 12W RGBAWUV LEDs |
| Vat totaltage | 80 W |
| Canaux DMX | 6 ou 10 canaux |
| Modes de fonctionnement | Automatic, Sound, Master/Slave, DMX |
| Contrôle | Onboard display/buttons, IR Remote |
| Voltage | 240 volts |
| Dimensions du produit | 24.2 x 21 x 19.6 cm |
| Référence constructeur | LIG0016385-000 |
| Pays d'origine | Allemagne |
| Premier disponible | 16er août 2021 |
8. Garantie et assistance
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized lightmaXX dealer. Keep your proof of purchase for warranty claims.
