1. Introduction
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of the Okin JLDQ-12 and JLDQ.12.133.226M power recliner and bed motor actuator replacement. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. Produit terminéview et composants
The Okin JLDQ.12.133.226M is an electric linear actuator designed for power recliners and adjustable beds. It is specifically engineered as a direct replacement for the original Okin JLDQ.12.133.226M model.
2.1 Composants clés
- Moteur d'actionneur : The main unit responsible for linear movement.
- Connecteurs :
- Prise ronde à 5 broches : Pour le raccordement à la commande manuelle.
- Fiche carrée à 2 broches : Pour le raccordement à l'alimentation électrique.
Figure 1: Okin JLDQ.12.133.226M motor actuator with attached cables.
Figure 2 : Détaillé view of the 5-pin round plug for the recliner switch and the 2-pin square plug for the power supply.
3. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Nom du modèle | JLDQ.12.133.226M |
| Capacité de charge | Force de poussée : 750 N, Force de traction : 750 N |
| Accident vasculaire cérébral | 226 mm |
| Taille minimale d'installation (retrait) | 133 mm |
| Taille maximale d'installation | 359 mm |
| Fréquence de fonctionnement | Marche 1 min / Arrêt 8 min |
| Vitesse | Alimentation à découpage 29 V CC, 10 secondes sans charge |
| Apparence | Noir (PA), Blanc argenté (aluminium) |
| Dimensions du produit | 8.9 x 8.9 x 14.13 pouces |
| Poids de l'article | 4.59 livres (2.09 kilogramme) |
Figure 3: Product label displaying technical data and model information, including serial number Premier trimestre 21061699 et modèle JLDQ.12.133.226M. For patent information, visit www.dewertokin.de/brevets.
4. Configuration et installation
Remarque importante sur la compatibilité : This motor is specifically designed to replace the OKIN model JLDQ.12.133.226M. Different actuator/motors are generally not compatible due to strict requirements for minimum installation dimensions, stroke, and plug types. Always verify your existing motor's brand and model before attempting replacement.
4.1 Vérifications avant l'installation
- Vérifier le modèle : Confirm that your existing motor is an Okin JLDQ.12.133.226M.
- Coupure de courant : Ensure the power supply to the recliner or bed is completely disconnected before starting any installation work.
- Inspecter les composants : Check the new motor and cables for any visible damage.
4.2 étapes d'installation
- Retirer l'ancien moteur : Carefully detach the old motor from the recliner or bed frame. Note how it was connected to ensure correct installation of the new unit.
- Position du nouveau moteur : Align the new Okin JLDQ.12.133.226M motor with the mounting points on the frame.
- Moteur sécurisé : Fasten the motor securely to the frame using appropriate hardware (not included, typically reused from the old motor or provided with the furniture).
- Connecter les câbles :
- Connectez le Fiche ronde à 5 broches to the hand control switch.
- Connectez le 2-pin square plug to the power supply unit.
- Gestion des câbles: Ensure all cables are routed safely, away from moving parts, and secured to prevent pinching or damage.
Figure 4 : Example of the motor actuator mounted, showing its extended position.
5. Mode d'emploi
Once the motor is correctly installed and all connections are secure, reconnect the main power supply to your recliner or adjustable bed.
- Mise sous tension : Plug the recliner/bed into a suitable power outlet.
- Commande manuelle : Use the hand control unit to operate the recliner or bed. Press and hold the appropriate buttons to extend or retract the actuator, adjusting the position as desired.
- Cycle de service : Adhere to the specified operation frequency: Marche 1 minute / Arrêt 8 minutes. Continuous operation beyond 1 minute can lead to overheating and damage to the motor. Allow the motor to cool down for at least 8 minutes after 1 minute of continuous use.
6. Entretien
Regular maintenance ensures the longevity and reliable operation of your Okin motor actuator.
- Nettoyage: Wipe clean the exterior of the motor and cables with a dry or slightly damp Chiffon. N’utilisez pas de nettoyants abrasifs et n’immergez pas l’appareil dans l’eau.
- Inspection des câbles : Periodically check all cables and connections for wear, fraying, or loose plugs. Ensure they are securely attached and not pinched.
- Pièces mobiles: Ensure the linear shaft moves freely and is not obstructed by debris or fabric.
- Lubrification: Le moteur ne nécessite généralement aucun entretien en ce qui concerne la lubrification interne. Ne tentez pas de lubrifier les composants internes, sauf indication contraire du support technique d'Okin.
7. Dépannage
If your recliner or adjustable bed is not functioning correctly, follow these troubleshooting steps:
- Pas de mouvement:
- Check if the power cord is securely plugged into the wall outlet and the power supply unit.
- Verify that the 2-pin square plug from the motor is firmly connected to the power supply.
- Ensure the 5-pin round plug from the motor is properly connected to the hand control.
- Test the wall outlet with another appliance to confirm it has power.
- Mouvement intermittent :
- Vérifiez que tous les connecteurs de câbles ne sont ni desserrés ni endommagés.
- Ensure the motor is not overheating. Allow it to cool down if it has been operated continuously.
- Bruits inhabituels :
- Check for any obstructions around the motor or the linear shaft.
- Ensure the motor is securely mounted and not vibrating against the frame.
- Motor Does Not Extend/Retract Fully:
- Verify that there are no physical obstructions preventing full movement.
- Ensure the motor is correctly installed with the specified minimum and maximum installation sizes.
If issues persist after following these steps, contact Okin customer support or a qualified technician.
8. Informations importantes sur la sécurité
- Coupez toujours l'alimentation électrique avant d'effectuer toute installation, maintenance ou nettoyage.
- Ce produit est conçu pour une utilisation en intérieur uniquement.
- Do not allow children or pets to play near the moving parts of the recliner or bed.
- Ensure proper cable routing to prevent tripping hazards or damage to the cables.
- Ne tentez pas de modifier le moteur ni ses composants. Toute modification non autorisée peut entraîner un dysfonctionnement et annuler la garantie.
- Only use this motor as a replacement for the specified Okin JLDQ.12.133.226M model. Using incompatible parts can cause damage to the furniture and the motor.
9. Garantie et assistance
For warranty information, technical support, or further assistance, please refer to the official Okin website or contact your product retailer. Keep your purchase receipt as proof of purchase for warranty claims.
You can visit the Okin store for more products and information: Boutique Okin sur Amazon.
