Ergosolid H100 Gas Spring Desk Mount for 22-35 Inch LCD Screens

1. Produit terminéview

The Ergosolid H100 is a professional gas spring desk mount designed to enhance your workspace ergonomics. It supports single LCD, TFT, or LED screens ranging from 22 to 35 inches, with a weight capacity of 2 to 12 kg. This mount features a 360-degree pivot function, tilt, and rotation capabilities, allowing for smooth and precise adjustments to achieve your ideal viewing angle. It is compatible with VESA mounting patterns of 75x75mm and 100x100mm. The integrated cable management system helps maintain a tidy and organized desk.

Image 1.1: Ergosolid H100 Gas Spring Desk Mount with a monitor.

2. Contenu de la boîte

Veuillez vous assurer que tous les composants sont présents avant de commencer l'installation :

• Monitor holder (main arm assembly)
• Set of screws (for VESA mounting and desk attachment)
• Instructions d'installation
• Allen keys for adjustments

3. Configuration et installation

The Ergosolid H100 offers two primary installation methods: desk clamp et montage par œillet. Choisissez la méthode la mieux adaptée à votre bureau.

3.1. Vérification de la compatibilité VESA

Before installation, verify your monitor's VESA compatibility and weight. This mount supports VESA patterns of 75x75mm and 100x100mm, and monitors weighing between 2 kg and 12 kg.

Image 3.1: VESA mounting pattern compatibility.

3.2. Bureauamp Installation

1. Fixez le bureau clamp base to the main pole using the provided screws.
2. Positionner le clamp on the edge of your desk (desk thickness 25-80 mm).
3. Serrez le clamp Visser jusqu'à ce que le support soit solidement fixé au bureau.

3.3. Installation du support à œillet

1. If your desk has a grommet hole, or if you plan to drill one, attach the grommet base to the main pole.
2. Insérez le poteau dans le trou de l'œillet.
3. Secure the mount from underneath the desk using the provided plate and screw.

Image 3.2 : Bureau clamp et options de montage par œillet.

3.4. Fixation du moniteur

1. Carefully attach your monitor to the VESA plate on the arm using the appropriate screws.
2. Ensure the screws are tightened securely but do not overtighten.

For a visual guide on installation and features, please refer to the official product video:

4. Mode d'emploi

The Ergosolid H100 monitor arm provides extensive flexibility for positioning your screen.

4.1. Adjusting the Gas Spring Tension

The gas spring tension needs to be adjusted to match your monitor's weight. Use the provided Allen key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.

4.2. Positionnement du moniteur

• Réglage de la hauteur : Gently push or pull the monitor up or down to the desired height.
• Inclinaison: Tilt the monitor screen +85 degrees upwards or -30 degrees downwards to reduce glare and optimize viewangles d'inclinaison.
• Pivot: Swivel the monitor arm left or right up to 360 degrees around the pole. The VESA plate also allows 180-degree swivel.
• Rotation (pivot) : Faites pivoter le moniteur à 360 degrés pour basculer entre les orientations paysage et portrait.
• Extension/Rétraction : Extend or retract the arm to bring the monitor closer or push it further away from you, with a maximum extension of 550 mm.

Image 4.1: Adjustment ranges for the Ergosolid H100 monitor arm.

4.3. Gestion des câbles

Route your monitor and power cables through the integrated cable clips on the underside of the arm to keep your workspace neat and organized.

5. Entretien

To ensure the longevity and optimal performance of your Ergosolid H100 desk mount, follow these simple maintenance guidelines:

• Nettoyage régulier : Essuyez le support avec un chiffon doux et sec.amp Utiliser un chiffon pour enlever la poussière et la saleté. Éviter les nettoyants abrasifs.
• Vérifier les connexions : Vérifiez régulièrement le serrage de toutes les vis et boulons. Resserrer si nécessaire, mais sans excès.
• Réglage du ressort à gaz : If your monitor's weight changes, or if the arm starts to drift, re-adjust the gas spring tension as described in Section 4.1.

6. Dépannage

• Monitor drifts up or down: The gas spring tension is not correctly adjusted for your monitor's weight. Refer to Section 4.1 to adjust the tension.
• Monitor is wobbly: Ensure all mounting screws (both to the desk and to the monitor) are securely tightened. Check that the desk clamp or grommet mount is firmly attached to the desk.
• Difficulty moving the arm: Check if any adjustment points are overly tightened. Loosen slightly if necessary. If the gas spring is too tight or too loose, adjust it according to Section 4.1.
• Cables are not tidy: Ensure all cables are routed through the designated cable management clips on the arm.

7. Spécifications

8. Garantie et assistance

The Ergosolid H100 desk mount comes with a Garantie constructeur d'un an. For any support inquiries, technical assistance, or warranty claims, please contact Ergosolid customer service through their official channels or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.