Manuel d'utilisation du chauffe-eau électrique Ferroli TITANO TWIN GRZ54DKA 50 litres

1. Introduction

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Ferroli TITANO TWIN GRZ54DKA 50-liter electric water heater. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Consignes de sécurité

Adherence to the following safety guidelines is crucial for preventing injury and damage:

• Coupez toujours l'alimentation électrique avant d'effectuer toute opération de maintenance ou d'installation.
• L'installation doit être effectuée par un personnel qualifié, conformément aux réglementations et normes locales.
• N’utilisez pas le chauffe-eau s’il est endommagé ou s’il fonctionne mal.
• Assurez-vous d’une mise à la terre appropriée pour éviter les chocs électriques.
• Ne bloquez pas les ouvertures de ventilation.
• Cet appareil n'est pas destiné à être utilisé par des personnes (y compris les enfants) ayant des capacités physiques, sensorielles ou mentales réduites, ou manquant d'expérience et de connaissances, à moins qu'elles ne bénéficient d'une surveillance ou d'instructions concernant l'utilisation de l'appareil par une personne responsable de leur sécurité.
• Les enfants doivent être surveillés pour s’assurer qu’ils ne jouent pas avec l’appareil.
• Maximum operating pressure is 8 bars. Do not exceed this pressure.

3. Produit terminéview

The Ferroli TITANO TWIN GRZ54DKA is a compact, slim electric water heater featuring a dual-tank design for enhanced efficiency and comfort. It includes SMART electronic control and integrated Wi-Fi for remote management.

Caractéristiques principales :

• Dual tank system for improved efficiency and faster heating.
• Slim design for reduced footprint and easier installation in confined spaces.
• SMART electronic control optimizes energy consumption based on user habits.
• Integrated Wi-Fi module for remote control via the 'Egea Smart' application.
• Blue Forever heating elements with special surface treatment to reduce scale buildup.
• Suitable for both horizontal and vertical installation.

Images du produit :

4. Configuration et installation

Proper installation is critical for the safe and efficient operation of your water heater. It must be performed by qualified personnel.

4.1 Sélection de l'emplacement

Choose a suitable location that can support the weight of the water heater when full. The unit can be installed horizontally or vertically. Ensure adequate space for maintenance and air circulation around the unit.

4.2 Montage

Securely mount the water heater to a sturdy wall or ceiling structure using appropriate fasteners. The design allows for installation with electrical connections suitable for ceiling or wall mounting.

4.3 Connexions de plomberie

Connect the cold water inlet and hot water outlet pipes. Install a pressure relief valve as required by local codes. Ensure all connections are watertight to prevent leaks.

4.4 Connexion électrique

Connect the water heater to a dedicated electrical circuit with proper grounding. The electrical connection must comply with all local electrical codes. A qualified electrician should perform this step.

4.5 Remplissage du réservoir

Before powering on, open a hot water faucet to allow air to escape and the tank to fill completely with water. Close the faucet once water flows steadily from it.

5. Mode d'emploi

Follow these steps to operate your Ferroli TITANO TWIN water heater:

5.1 Mise sous tension

Once installed and filled with water, connect the water heater to the power supply.

5.2 SMART Electronic Control

The unit features SMART electronic control that optimizes energy consumption based on your hot water usage patterns. The system learns and adapts to your needs over time.

5.3 Connectivité Wi-Fi

The integrated Wi-Fi module allows remote control via the 'Egea Smart' application. Download the 'Egea Smart' app from your device's app store (available for iOS and Android).

5.4 Couplage d'applications

Follow the instructions within the 'Egea Smart' app to pair your water heater with your smartphone or tablet. This will enable remote temperature adjustment, scheduling, and monitoring of your unit.

5.5 Réglage de la température

Adjust the desired water temperature using the control panel on the unit or conveniently through the 'Egea Smart' app.

6. Entretien

Un entretien régulier garantit la longévité et l'efficacité de votre chauffe-eau.

6.1 Inspection régulière

Periodically inspect the water heater for any signs of leaks, corrosion, or damage to the power cord and plumbing connections.

6.2 Blue Forever Technology

The Blue Forever heating elements feature a special surface treatment designed to significantly reduce scale buildup, contributing to long-lasting and efficient operation. While this reduces the need for frequent descaling, periodic checks are still recommended.

6.3 Anode Check

For optimal protection against corrosion, it is recommended to have the magnesium anode checked and replaced by a qualified technician every 1-2 years, depending on local water quality.

6.4 Draining (if necessary)

If the unit needs to be drained for maintenance or if there is a risk of freezing, disconnect power, close the cold water inlet valve, and open a hot water faucet and the drain valve at the bottom of the unit.

6.5 Nettoyage

Nettoyez l'extérieur du chauffe-eau avec un chiffon doux et sec.amp chiffon. N'utilisez pas de nettoyants abrasifs ou de produits chimiques agressifs.

7. Dépannage

Consultez le tableau suivant pour connaître les problèmes courants et leurs solutions :

For any issues not resolved by these steps, contact Ferroli customer support.

8. Spécifications

9. Garantie et assistance

For warranty information and technical assistance, please refer to the warranty card included with your product or visit the official Ferroli website. Contact Ferroli customer support for service inquiries and professional assistance.