Universal Audio UAFX Golden Reverb Pedal Instruction Manual

1. Introduction

The Universal Audio UAFX Golden Reverb Pedal delivers classic reverb effects, including Spring, Plate, and Vintage Digital. This pedal offers Live/Preset footswitch modes and selectable true or buffered/trails bypass via the UAFX Control app. This manual provides detailed instructions for setting up, operating, and maintaining your UAFX Golden Reverb Pedal.

2. Contenu de la boîte

• UAFX Golden Reverberator Pedal
• UAFX Control app (download required)

3. Produit terminéview

3.1. Commandes et indicateurs

The UAFX Golden Reverb Pedal features intuitive controls for shaping your reverb sound. Familiarize yourself with the layout below.

Image 1: Haut view of the UAFX Golden Reverb Pedal, highlighting the Decay, Predelay, Mix, Bass, Treble, and Mod knobs, along with the Effect Type, Store, and A/B/C switches, and the ON and PRESET footswitches.

• Bouton DECAY : Règle la longueur de la queue de réverbération.
• PREDELAY Knob: Contrôle le délai avant le début de l'effet de réverbération.
• Bouton de mélange : Sets the balance between the dry (unaffected) and wet (effected) signal.
• Bouton BASS : Ajuste le contenu en basses fréquences de la réverbération.
• Bouton TREBLE : Ajuste le contenu en haute fréquence de la réverbération.
• Bouton MOD : Controls the amount of modulation applied to the reverb tail.
• EFFECT TYPE Switch: Selects between Spring '65, Plate 140, and Hall 224 reverb algorithms.
• STORE Switch: Used to save custom settings as presets.
• Commutateur A/B/C : Selects different variations or modes within each effect type.
• Interrupteur au pied ON : Active ou désactive l'effet.
• Pédale préréglée : Recalls saved presets.

3.2. Connexions

Le panneau arrière comporte toutes les connexions audio et d'alimentation nécessaires.

Image 2: Rear panel connections of the UAFX Golden Reverb Pedal, including 1/MONO and 2/STEREO input/output jacks, 9VDC power input, USB-C port, and PAIR button.

• 1/MONO IN: Main audio input. Use for mono signal.
• 2/STEREO IN: Deuxième entrée audio pour un fonctionnement stéréo.
• 1/MONO OUT: Main audio output. Use for mono signal.
• 2/STEREO OUT: Deuxième sortie audio pour un fonctionnement stéréo.
• 9VCC : Power input for connecting a 9V DC power supply (400mA minimum, center-negative).
• USB-C : For firmware updates and connection to the UAFX Control app.
• Bouton APPAIRE : Used for Bluetooth pairing with the UAFX Control app.

4. Installation

1. Connexion électrique : Connect a 9V DC power supply (center-negative, 400mA minimum) to the 9VDC input.
2. Connexions audio :
   • Pour Mono operation, connect your instrument to the 1/MONO IN Jack et votre amplifier/interface to the 1/MONO OUT jack.
   • Pour Stéréo operation, connect your instrument/stereo source to both 1/MONO IN et 2/STEREO IN jacks, and your stereo amplifier/interface to both 1/MONO OUT et 2/STEREO OUT crics.
3. Mise sous tension initiale : The pedal will power on automatically when connected to power. The ON LED will illuminate.
4. UAFX Control App: Download the UAFX Control app from your device's app store. Use the USB-C port for initial registration and firmware updates. Use the PAIR button for Bluetooth connection to manage settings and access additional features.

Image 3: The UAFX Golden Reverb Pedal integrated into a guitar pedalboard setup, demonstrating typical connections to other effects and an amplifier.

5. Mode d'emploi

5.1. Selecting Reverb Modes

Utilisez le TYPE D'EFFET toggle switch to select one of the three primary reverb algorithms:

• Spring '65: Emulates the classic spring reverb tanks found in vintage 1960s American guitar amplificateurs.
• Plate 140: Recreates the dense, smooth sound of German studio plate reverbs from the 1950s.
• Hall 224: Provides the rich, expansive sound of vintage digital hall reverbs from the late 1970s.

Further variations within each effect type can be accessed using the ABC toggle switch. For example, the Spring '65 mode offers different spring tank configurations, while Plate 140 and Hall 224 offer distinct plate and hall characteristics respectively. Additional vintage digital Chamber & Plate effects can be downloaded upon product registration via the UAFX Control app.

5.2. Adjusting Reverb Parameters

Ajustez le POURRITURE, PRÉDÉLAI, et MÉLANGER knobs to fine-tune the reverb's characteristics. The BASS et TRIPLER knobs allow for equalization of the reverb tail, while the MOD knob introduces subtle modulation for added texture.

Image 4: Détaillé view of the control knobs and switches on the UAFX Golden Reverb Pedal, showing settings for Decay, Predelay, Mix, Bass, Treble, and Mod.

5.3. Live/Preset Modes and Bypass

• Mode direct : When the PRESET LED is off, the pedal operates in Live mode, reflecting the current physical knob settings.
• Mode préréglé: To save a preset, adjust the controls to your desired sound, then press and hold the MAGASIN switch until the PRESET LED flashes. To recall a preset, press the PRÉRÉGLAGE interrupteur au pied.
• Modes de contournement : The pedal supports both true bypass and buffered bypass with trails. This setting can be configured via the UAFX Control app. True bypass completely removes the pedal from the signal path when off, while buffered bypass allows the reverb tail to naturally decay after the effect is disengaged.

6. Entretien

• Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur de la pédale. Évitez les nettoyants abrasifs et les solvants.
• Mises à jour du micrologiciel : Periodically check the Universal Audio website or the UAFX Control app for firmware updates to ensure optimal performance and access to new features. Updates are typically performed via the USB-C connection.
• Stockage: Rangez la pédale dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes lorsqu'elle n'est pas utilisée.

7. Dépannage

• Pas de son :
  • Ensure the power supply is correctly connected and providing 9V DC (center-negative).
  • Vérifiez que tous les câbles audio sont correctement connectés et en bon état.
  • Verify the ON footswitch is engaged (ON LED illuminated).
• Bruit inattendu :
  • Check knob settings, especially MIX, DECAY, and MOD.
  • Ensure proper grounding of your audio equipment to avoid hum or buzz.
  • Test with different cables and power supplies to rule out faulty accessories.
• UAFX Control App Connectivity Issues:
  • Assurez-vous que Bluetooth est activé sur votre appareil mobile.
  • Press the PAIR button on the pedal to initiate pairing mode.
  • For initial setup or persistent issues, connect the pedal via USB-C to a computer and use the desktop UAFX Control software.

8. Spécifications

9. Garantie et assistance

For warranty information, technical support, and additional resources, please visit the official Universal Audio website or contact their customer service. Ensure your product is registered to receive updates and support.

The UAFX Control app provides a convenient way to manage your pedal's settings, update firmware, and access exclusive features. It is available for both iOS and Android devices.

Ressources en ligne : Universal Audio Official Website