Bestway Swim Safe Step B Swim Vest (Model 32034) Instruction Manual

Informations importantes sur la sécurité

This Bestway Swim Safe Step B Swim Vest is a swimming aid designed to assist children in learning to swim. It is not a life-saving device. Constant, competent adult supervision is required at all times when the vest is in use, regardless of the child's swimming ability.

• Recommandation d'âge : Convient aux enfants de 3 à 5 ans.
• Surveillance: Never leave a child unattended while using this vest.
• Inspection: Always inspect the vest for any damage, punctures, or leaks before each use. Do not use if damaged.
• Ajuster: Ensure the vest fits snugly and securely on the child.
• Environnement d'utilisation: Use only in shallow water and under direct adult supervision.

Produit terminéview

The Bestway Swim Safe Step B Swim Vest, model 32034, is an inflatable swimming aid designed to help young children gain confidence and learn basic swimming skills. It features safety valves for secure inflation and is constructed from durable vinyl material.

This image shows a child wearing the yellow Bestway Swim Safe Step B Swim Vest while in a swimming pool, accompanied by an adult. The vest is designed to aid children in learning to swim under supervision.

The vest is yellow in color and measures approximately 51 x 46 cm when inflated. Its primary function is to provide buoyancy and support, allowing children to practice arm and leg movements in the water.

Instructions d'installation

1. Déballer: Carefully remove the swim vest from its packaging.
2. Inspecter: Before inflation, visually inspect the vest for any manufacturing defects, tears, or punctures.
3. Gonfler: Locate the safety valves on the vest. Open the valve cap and inflate each chamber using a hand pump (not included) or by mouth. Inflate until the vest is firm but not over-inflated. Do not use high-pressure air compressors.
4. Vannes sécurisées : Firmly close the valve caps and push them flush with the vest surface to prevent air leakage.
5. Vérifiez les fuites : After inflation, submerge the vest in water and check for any air bubbles, which would indicate a leak. If a leak is found, deflate, locate the leak, and use a repair patch (if available) or contact customer support.

Mode d'emploi

1. Donning the Vest: Assist the child in putting on the swim vest. Ensure the vest is worn correctly with the child's arms through the armholes and the vest covering the torso.
2. Ajustement de l'ajustement : The vest should fit snugly around the child's body without being too tight or too loose. It should not ride up excessively when the child is in the water.
3. Entry into Water: Guide the child into the water slowly. The vest will provide buoyancy, helping the child float.
4. Surveillance: Maintain constant, close adult supervision. The adult should be within arm's reach of the child at all times.
5. Learning to Swim: Encourage the child to practice kicking and arm movements while supported by the vest. This vest is a tool for learning, not a substitute for swimming lessons.

Entretien

• Nettoyage: After each use, rinse the swim vest thoroughly with fresh water. Do not use harsh chemicals or abrasive cleaners.
• Séchage: Allow the vest to air dry completely in a shaded, well-ventilated area before storage. Do not expose to direct sunlight for extended periods.
• Stockage: Once dry, deflate the vest by opening the safety valves and gently pressing out the air. Fold it neatly and store it in a cool, dry place, away from direct sunlight and sharp objects.
• Inspection régulière : Periodically inspect the vest for any signs of wear, tear, or damage, especially along seams and around valves.

Dépannage

Loss of Air

• Bouchons de clapet anti-retour : Ensure all safety valve caps are securely closed and pushed flush with the vest surface.
• Vérifier l'absence de perforations : Inflate the vest and carefully listen for hissing sounds. You can also submerge the vest in water to look for air bubbles indicating a leak.
• Réparation: If a small puncture is found, use a vinyl repair patch (often included with inflatable products) to seal it. Follow the patch kit instructions carefully.
• Surinflation : Avoid over-inflating the vest, as this can stress the seams and lead to leaks.

If you are unable to resolve the issue, please contact Bestway customer support.

Caractéristiques

Garantie et assistance

For specific warranty information regarding your Bestway Swim Safe Step B Swim Vest, please refer to the documentation included with your purchase or visit the official Bestway webLes conditions de garantie peuvent varier selon la région et le détaillant.

If you encounter any issues or require assistance with your product, please contact Bestway customer support directly or the retailer from whom you purchased the item. Have your model number (32034) and proof of purchase ready when contacting support.