1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Lumi LPA36-463A Full-Motion TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed to securely hold most LED and LCD televisions ranging from 37 to 70 inches, with a maximum weight capacity of 45 kg (99 lbs).
The full-motion design allows for maximum extension, tilt, and rotation of your television, providing optimal viewing angles from various positions within a room. The mount can extend up to 475 mm from the wall and retract to a slim profile de 95 mm.
Image 1.1: The Lumi LPA36-463A Full-Motion TV Wall Mount, showing its articulated arm and VESA plate.
2. Consignes de sécurité
AVERTISSEMENT: Le non-respect de ces instructions peut entraîner des blessures graves, des dommages matériels ou l'annulation de votre garantie. Si vous ne comprenez pas ces instructions ou si vous avez des doutes quant à la sécurité de l'installation, veuillez contacter un installateur qualifié.
- Ne pas dépasser la capacité de poids maximale de 45 kg (99 lbs).
- This mount is designed for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
- Vérifiez que la structure du mur peut supporter en toute sécurité le poids combiné du support et du téléviseur.
- Use only the mounting hardware provided. Do not use power tools to tighten screws, as this may strip threads.
- Gardez toutes les petites pièces hors de portée des enfants.
- Always have at least two people for installation to prevent injury or damage.
- Vérifiez régulièrement toutes les connexions pour vous assurer qu'elles restent sécurisées.
3. Contenu du colis
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact your retailer for assistance.
| Partie | Description | Quantité |
|---|---|---|
| Ensemble de plaque murale | Main wall mounting bracket with articulated arm. | 1 |
| Support TV (plaque VESA) | Bracket that attaches to the back of the TV. | 1 |
| Kit de matériel de montage | Includes various screws, washers, and anchors for wall and TV attachment. | 1 ensemble |
| Niveau | For ensuring horizontal alignment during installation. | 1 |
| Manuel d'instructions | Ce document. | 1 |
4. Configuration et installation
Before you begin, ensure you have the necessary tools: pencil, drill, stud finder (for wood studs), measuring tape, and a Phillips head screwdriver. It is highly recommended to have two people for installation.
4.1. Déterminer l'emplacement de montage
- Choose a location on the wall that can support the weight of the TV and mount.
- For wood stud walls, locate the center of the studs using a stud finder.
- For concrete or brick walls, ensure there are no hidden pipes or electrical wires.
- Mark the desired height for the top of your TV.
4.2. Fixez la plaque murale au mur.
- Position the wall plate assembly against the wall at the desired height. Use the integrated level to ensure it is perfectly horizontal.
- Mark the drill holes through the wall plate onto the wall with a pencil.
- Percez des avant-trous :
- For wood studs: Use a 5.5mm (7/32") drill bit.
- For concrete/brick: Use a 10mm (3/8") masonry drill bit and insert wall anchors.
- Fixez la plaque murale au mur à l'aide des tire-fonds et des rondelles fournis. Serrez fermement, mais sans excès.
4.3. Fixez les supports de télévision au téléviseur.
- Posez délicatement votre téléviseur face contre une surface douce et propre.
- Identify the VESA mounting holes on the back of your TV. This mount supports VESA patterns up to 400x400 mm.
- Select the appropriate screws (M4, M6, or M8) and washers from the hardware kit that fit your TV's mounting holes.
- Attach the TV brackets to the back of your TV, ensuring they are centered and securely fastened. Do not overtighten.
4.4. Mount TV to Wall Plate
- With assistance, carefully lift the TV and hook the TV brackets onto the wall plate assembly.
- Assurez-vous que le téléviseur est bien fixé sur la plaque murale.
- Engage any safety locking mechanisms (if present) to prevent accidental dislodgement.
5. Mode d'emploi
The Lumi LPA36-463A mount offers full-motion capabilities for optimal viewflexibilité.
5.1. Adjusting Extension and Retraction
- Gently pull the TV away from the wall to extend the arm. The mount can extend up to 475 mm.
- Push the TV back towards the wall to retract the arm. The mount can retract to a minimum distance of 95 mm from the wall.
- Always move the TV smoothly and avoid sudden jerks.
5.2. Adjusting Tilt
- The mount allows for vertical tilt adjustment. Loosen the tilt adjustment knobs (if present, refer to diagram in physical manual) on the TV brackets.
- Adjust the TV to the desired upward or downward angle.
- Tighten the tilt adjustment knobs to secure the TV in position.
5.3. Adjusting Swivel (Rotation)
- The articulated arm allows for horizontal swivel of the TV up to 90 degrees left and right.
- Gently push or pull the side of the TV to rotate it to your preferred viewangle de vue.
- No locking mechanism is typically required for swivel; the friction of the joints holds the position.
6. Entretien
Un entretien régulier garantit la longévité et le fonctionnement sûr de votre support mural pour téléviseur.
- Nettoyage: Essuyez le support avec un chiffon doux et sec. N’utilisez pas de nettoyants abrasifs ni de solvants.
- Inspection périodique: Every 3-6 months, check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- Lubrification des articulations : If the arm movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points. Avoid oil-based lubricants.
- Vérification des dommages : Inspect the mount for any signs of damage, wear, or corrosion. If any damage is found, discontinue use and contact customer support.
7. Dépannage
If you encounter issues with your Lumi LPA36-463A TV mount, refer to the following common problems and solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Le téléviseur n'est pas de niveau après l'installation. | Wall plate not perfectly horizontal. | Carefully loosen wall plate bolts, adjust with a level, and retighten. Some mounts have post-installation leveling adjustments; check your specific model. |
| Le support semble lâche ou instable. | Mounting bolts are not tight enough or incorrect wall anchors were used. | Ensure all wall bolts and TV attachment screws are securely tightened. Verify correct anchors for your wall type. If problem persists, consult a professional. |
| TV cannot tilt or swivel smoothly. | Les articulations sont trop serrées ou nécessitent une lubrification. | Check if any adjustment knobs are overtightened. Apply a small amount of silicone-based lubricant to the moving joints. |
| Le téléviseur ne convient pas au support. | Norme VESA incorrecte ou taille/poids du téléviseur incorrect. | Verify your TV's VESA pattern and weight against the mount's specifications. This mount supports VESA up to 400x400mm and TVs up to 45kg (99lbs). |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | LPA36-463A |
| Marque | Lumière |
| Type de monture | Full-Motion Wall Mount |
| Matériel | Métal |
| Compatibilité de la taille de l'écran | 37" - 70" |
| Capacité de poids | 45 kg (99 lb) |
| Compatibilité VESA | Jusqu'à 400 x 400 mm |
| Extension du mur | 95 mm (rétracté) à 475 mm (déployé) |
| Plage d'inclinaison | Adjustable (vertical) |
| Gamme de pivot | Jusqu'à 90 degrés gauche/droite |
| Dimensions d'expédition | 51.4 x 22.2 x 7 cm ; 2.52 kg |
9. Garantie et assistance
Lumi products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official Lumi webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.
For technical support, missing parts, or any questions regarding the installation or operation of your Lumi LPA36-463A TV Wall Mount, please contact your local retailer or Lumi customer service.
Coordonnées: (Please refer to your product packaging or Lumi's official web(Voir le site pour les coordonnées les plus récentes.)
