VIMAR 02970

Manuel d'utilisation du thermostat Vimar 02970

Modèle: 02970

Marque : VIMAR

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of the Vimar 02970 thermostat. This device is designed for controlling heating and cooling systems with ON/OFF functionality, featuring a control knob, relay output, and an LED backlight with brightness adjustment. It is compatible with Vimar Eikon, Arké, or Plana frames.

2. Consignes de sécurité

3. Produit terminéview

The Vimar 02970 thermostat offers intuitive control over your climate system. Key features include:

Vimar 02970 Thermostat Front View

Figure 1 : Face avant view of the Vimar 02970 thermostat, showing the central display, control knob, and surrounding icons for temperature units, light, and mode selection.

4. Configuration et installation

4.1 Déballage

Carefully remove the thermostat and any included components from the packaging. Verify that all parts are present.

4.2 Montage

The Vimar 02970 thermostat is designed to be integrated into Eikon, Arké, or Plana frames. Ensure the chosen frame is compatible.

Vimar 02970 Thermostat installed in a wall frame

Figure 2: The Vimar 02970 thermostat integrated into a wall frame, demonstrating its flush-mount appearance.

4.3 Câblage

Before wiring, ensure the main power supply to the circuit is disconnected.

  1. Identify the power supply wires (Live, Neutral) and the heating/cooling system control wires (Common, Normally Open, Normally Closed).

  2. Connect the Live (L) and Neutral (N) wires to the corresponding terminals on the thermostat. The thermostat operates on 100-240V~, 50/60Hz.

  3. Connect the heating/cooling system control wires to the C (Common), NO (Normally Open), and NC (Normally Closed) relay output terminals as required by your system.

  4. Ensure all connections are secure. The terminals are designed for wires up to 6 mm².

Vimar 02970 Thermostat rear view avec bornes de câblage

Figure 3 : Arrière view of the Vimar 02970 thermostat, showing the screw terminals for electrical connections (L, N, C, NO, NC).

Vimar 02970 Thermostat side view avec détails de câblage

Figure 4 : Côté view of the Vimar 02970 thermostat, illustrating the depth and the wiring terminals with specifications (100-240V~, 5(2)A, 1B.U, -T40).

4.4 Mise sous tension initiale

After wiring, restore power at the main circuit breaker. The thermostat display should illuminate.

5. Mode d'emploi

5.1 Mise sous/hors tension

Appuyez sur l'icône d'alimentation () located on the bottom left of the thermostat to turn the device on or off.

5.2 Réglage de la température

Rotate the central control knob clockwise to increase the set temperature and counter-clockwise to decrease it. The current set temperature will be displayed on the LED screen.

Hand adjusting Vimar 02970 Thermostat control knob

Figure 5: A hand rotating the central control knob of the Vimar 02970 thermostat to adjust the temperature setting.

5.3 Changing Mode (Heating/Cooling)

The thermostat supports both heating and cooling modes. The mode can typically be switched using a dedicated button or a combination of button presses. Refer to the on-screen icons for current mode indication (e.g., snowflake for cooling, sun for heating).

5.4 Réglage de la luminosité du rétroéclairage

The LED backlight brightness can be adjusted. Consult the Vimar website for specific instructions on accessing this setting, as it may involve keyboard shortcuts.

5.5 Programming (If Applicable)

The thermostat features "Friendly Programming." For detailed instructions on setting schedules or advanced programming options, refer to the comprehensive tutorials available on the official Vimar website.

6. Entretien

7. Dépannage

ProblèmeCause possibleSolution
L'affichage du thermostat est éteint.Pas d'alimentation électrique.Check the main circuit breaker. Ensure wiring connections are secure.
System (heating/cooling) not responding.Câblage incorrect ; thermostat dans le mauvais mode ; température de consigne non atteinte.Verify wiring connections. Ensure the thermostat is in the correct mode (heating/cooling). Adjust the set temperature to be above/below the ambient temperature to trigger the system.
La température relevée semble inexacte.L'emplacement du thermostat peut être affecté par les courants d'air ou les sources de chaleur.Ensure the thermostat is not installed near windows, doors, or direct heat/cold sources.

8. Spécifications

FonctionnalitéDétail
Numéro de modèle02970
MarqueVIMAR
Voltage100-240V~
Fréquence50/60 Hz
Sortie relais5(2)A, 1B.U
Température de fonctionnement-T40 (Specific range not provided, consult Vimar documentation)
Poids de l'article70 g
Dimensions du produit4.15 x 4.48 x 4.9 cm (42D x 45W x 49H millimeters)
Type de contrôleurBouton mécanique
Caractéristiques spécialesLighted (LED Backlight)
ConnectivitéCâblé
Cadres compatiblesEikon, Arké, or Plana
Vimar 02970 Thermostat technical dimensions diagram

Figure 6: Technical diagram showing the dimensions of the Vimar 02970 thermostat (41.7mm depth, 44.8mm width, 49mm height).

9. Garantie et assistance

For warranty information, technical support, or additional tutorials, please visit the official Vimar website or contact your local Vimar distributor. The Vimar website provides comprehensive instructions and tutorials for programming and advanced features.

Vimar Website: www.vimar.com

Documents connexes - 02970

Préview Thermostat VIMAR EIKON 20440 à usage domestique - Produit ci-dessusview
Informations détaillées sur le thermostat électronique VIMAR EIKON 20440, conçu pour le contrôle du chauffage et de la climatisation domestiques. Il est équipé d'une entrée d'économie d'énergie à distance et d'un interrupteur à 2 positions. Lien vers le manuel d'installation inclus. Produit : Arrêté.
Préview Thermostat intelligent VIMAR SMART CLIMA 30440.x - Guide d'utilisation et spécifications
Spécifications détaillées, fonctionnement, installation et informations réglementaires pour le thermostat à cadran rotatif VIMAR SMART CLIMA (modèle 30440.x), conçu pour le contrôle du chauffage et de la climatisation.
Préview Vimar Smart Clima 01910 : Guide rapide de l’utilisateur et de l’installateur
Ce document constitue un guide rapide pour le thermostat-minuterie électronique Vimar Smart Clima 01910. Il aborde l'installation, les principales caractéristiques, le réglage de la date et de l'heure, le fonctionnement manuel et automatique, les fonctions d'arrêt, le mode antigel et la sélection été/hiver. Il contient également les règles d'installation et les informations relatives à la conformité réglementaire.
Préview Guide d'installation des appareils intelligents VIMAR : séries LINEA, EIKON, ARKÉ, IDEA et PLANA
Installation et spécifications techniques des appareils intelligents VIMAR, notamment les séries LINEA, EIKON, ARKÉ, IDEA et PLANA. Découvrez la configuration, les fonctionnalités et la conformité.
Préview VIMAR BUS EnOcean Interface Installer Manual for Home Automation
Comprehensive installer manual for VIMAR's BUS EnOcean interface modules (Eikon, Arké, Plana) and the multi-function 1-relay actuator (01796.1). Covers installation, configuration, operation, and technical specifications for integrating radio-frequency devices into the By-me home automation system.
Préview Vimar Connected Radar Sensor: Installation Guide and Technical Specifications
Comprehensive guide to the Vimar connected radar sensor, detailing its UWB technology, installation, configuration for Stand Alone and View Wireless systems, features like presence, crowding, and twilight detection, and technical specifications. Includes wiring diagrams and compliance information.