Introduction
This manual provides essential information for the safe and effective operation of your Amazon Basics Class II Cross-Line Laser Level. Please read these instructions thoroughly before use and retain them for future reference.
Consignes de sécurité
WARNING: CLASS II LASER PRODUCT
This device emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at others. Use caution when operating the laser level to prevent accidental exposure.
- Utilisez toujours le niveau laser en toute sécurité.
- N'essayez pas de modifier ou de démonter l'appareil.
- Tenir hors de portée des enfants.
- Ensure the work area is clear of obstructions and reflective surfaces that could redirect the laser beam.
Contenu du colis
- Amazon Basics Class II Cross-Line Laser Level
- L-shaped Magnetic Pivoting Base
- Pochette de transport
- Manuel d'utilisation

Produit terminéview
The Amazon Basics Cross-Line Laser Level is designed to project bright horizontal, vertical, or cross-line laser beams for various leveling and alignment tasks. Its compact design and versatile mounting options make it suitable for indoor and outdoor use.
Caractéristiques principales :
- Projects horizontal, vertical, and cross-line green laser beams.
- 59-foot (708 inch) range for indoor and outdoor applications.
- Automatic self-leveling mode for quick and accurate setup.
- Manual mode for locking the laser at desired angles.
- Durable plastic and metal construction with a soft rubber exterior for enhanced grip.
- Battery-operated (AA batteries, not included).


Installation
1. Installation de la batterie
- Locate the battery compartment on the bottom of the laser level.
- Faites glisser le couvercle du compartiment des piles pour l'ouvrir.
- Insérez deux piles AA (non fournies), en veillant à respecter la polarité (+/-).
- Fermez soigneusement le couvercle du compartiment à piles.
2. Montage de l'appareil
The laser level can be used freestanding or mounted using the included L-shaped magnetic pivoting base. The base features a 1/4-inch screw thread for attachment to the laser level and magnets for securing to metallic surfaces. It is also compatible with standard tripods (not included).

Mode d'emploi
1. Marche/Arrêt
To turn the device on, slide the lock switch on the side to the unlocked position. To turn off, slide the switch to the locked position.
2. Automatic (Self-Leveling) Mode
When the lock switch is in the unlocked position, the laser level will automatically self-level within 4 degrees. If the device is outside this range, the laser lines will blink to indicate it is not level. Adjust the device's position until the laser lines become solid, indicating a level projection.

3. Mode manuel
To use the laser at a specific angle (e.g., for stair railings), slide the lock switch to the locked position. The laser lines will remain fixed at the angle you set. The lines may blink in manual mode to indicate that the self-leveling feature is disengaged.

4. Laser Line Selection
Press the power button on top of the device to cycle through different laser line modes: horizontal line, vertical line, or cross-line (both horizontal and vertical).


Entretien
- Keep the laser level clean and free of dust and debris. Use a soft, dry cloth for cleaning.
- Rangez l'appareil dans sa pochette de transport, dans un endroit frais et sec, lorsqu'il n'est pas utilisé.
- Retirez les piles si l'appareil ne doit pas être utilisé pendant une période prolongée afin d'éviter toute fuite.
- Ne plongez pas l'appareil dans l'eau et ne l'exposez pas à des températures extrêmes.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Laser lines are blinking. | In Automatic mode, the device is not level (outside 4-degree range). In Manual mode, blinking is normal. | In Automatic mode, adjust the device's position until the lines become solid. No action needed in Manual mode. |
| No laser lines. | Batteries are dead or incorrectly installed. Device is off. | Check battery polarity and replace if necessary. Ensure the lock switch is in the unlocked position. |
| Les lignes laser sont peu visibles. | Low battery power. Bright ambient light. | Replace batteries. Use the laser level in areas with less ambient light for better visibility. |
Caractéristiques
- Marque: Les bases d'Amazon
- Numéro de modèle : CLL-002
- Cours de laser : Classe II
- Type de laser : Green Cross-Line Laser
- Gamme: 59 pi / 708 po
- Gamme d'auto-nivellement: ±4 degrés
- Matériel: 70% plastique, 30% métal
- Couleur: Jaune/Noir
- Source d'alimentation : 2 piles AA (non incluses)
- Dimensions du produit : 2.8" L x 2.4" l x 3.3" H
- Poids de l'article : 12 onces (0.34 kilogrammes)
- Mode de fonctionnement : Automatique / Manuel
Garantie et assistance
For warranty information or customer support, please refer to the Amazon Basics official webConsultez le site web ou contactez directement le service client d'Amazon. Conservez votre reçu d'achat pour toute réclamation au titre de la garantie.