1. Introduction
Thank you for choosing the Lepro WL5000 Solar Motion Sensor Security Light. This manual provides essential information for the safe and efficient use of your new solar-powered lighting system. Please read these instructions carefully before installation and operation, and retain them for future reference.
The Lepro WL5000 features 72 ultra-bright LEDs, three adjustable light heads for 270° wide lighting, and a separate solar panel for optimal sun exposure. It is equipped with a PIR motion sensor for enhanced security and is designed for outdoor use with an IP65 waterproof rating.
Image: Two Lepro WL5000 Solar Motion Sensor Security Lights with separate solar panels.
2. Produit terminéview et composants
The Lepro WL5000 Solar Motion Sensor Security Light system includes the main light unit, a separate solar panel, and mounting hardware. The light unit features three adjustable heads and an integrated motion sensor.
Image: Detailed diagram of the Lepro WL5000 components and dimensions, including the solar light, solar panel, connection cable, wall plugs, wall brackets, mounting screws, and instruction manual.
Contenu du colis :
- Solar Light Unit (x2 for 2-pack)
- Separate Solar Panel (x2 for 2-pack)
- Connection Cable (16ft / 4.8m)
- Chevilles murales (x8)
- Supports muraux (x4)
- Vis de montage (x8)
- Manuel d'instructions
3. Configuration et installation
The Lepro WL5000 is designed for easy installation without complex wiring. Ensure the installation location receives ampla lumière directe du soleil pour le panneau solaire.
Étapes d'installation :
- Choisissez l'emplacement d'installation : Select a location for the light unit between 1.5-3.5 meters (5-12 feet) high on an exterior wall. The solar panel should be placed in a location that receives maximum direct sunlight throughout the day, such as a roof or an unobstructed wall. The 16ft (4.8m) connection cable allows for flexible placement.
- Monter le bloc d'éclairage : Using the provided screws and wall plugs, fix the wall bracket for the light unit to your chosen exterior wall. Securely attach the solar light unit to the bracket.
- Montez le panneau solaire : Fix the wall bracket for the solar panel to your chosen sunny location. Securely attach the solar panel to its bracket.
- Connectez le câble : Connect the cable from the solar panel to the input port on the solar light unit. Ensure a secure connection.
- Activez la lumière : Locate the power switch on the back of the main light unit. Press the switch to the 'ON' position to activate the light.
- Ajuster les têtes d'éclairage : Adjust the three light heads vertically and horizontally to achieve the desired 270° wide lighting angle for your area.
Image: Step 1 of installation, showing the solar light unit being fixed to a wall.
Image: Step 2 of installation, showing the separate solar panel being fixed to a roof.
Image: Steps 3 and 4 of installation, showing cable connection and turning on the power switch.
Image: The three adjustable light heads can be rotated to achieve a wide illumination angle.
Options d'installation flexibles :
The separate solar panel design offers flexibility. You can install the solar panel integrated with the light unit or separately, allowing optimal sun exposure for charging even if the light unit is in a shaded area.
Image: Flexible installation styles, showing integrated and separate solar panel mounting options.
4. Mode d'emploi
The Lepro WL5000 operates automatically based on light conditions and motion detection.
Opération automatique:
- Jour: The solar panel converts sunlight into electricity, charging the internal battery. The light remains off during the day.
- Nighttime (Motion Activated): At night, the integrated PIR motion sensor detects movement within a 16-26ft (5-8m) distance and a 120° detection angle. Upon detection, the light automatically turns on.
- Arrêt automatique : If no further motion is detected for approximately 20 seconds, the light will automatically turn off to conserve energy.
Image: Operational sequence of the solar light, demonstrating daytime charging, motion-activated illumination, and automatic shut-off.
Motion Sensor Performance:
The upgraded PIR motion sensor provides reliable detection. Factors such as ambient temperature, object size, and speed can influence detection range and sensitivity.
Image: Motion detection range and angle of the security light, covering up to 8 meters within a 120-degree field.
5. Entretien
To ensure optimal performance and longevity of your Lepro WL5000 solar light, follow these simple maintenance guidelines:
- Panneau solaire propre : Essuyez périodiquement la surface du panneau solaire avec un chiffon doux et sec.amp Un chiffon permet d'enlever la poussière, la saleté, les feuilles ou la neige. Un panneau propre garantit une absorption maximale de la lumière solaire et une charge efficace.
- Effacer les obstacles : Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
- Inspecter les connexions : Occasionally check the connection cable between the solar panel and the light unit to ensure it is secure and free from damage.
- Résistance aux intempéries : The light is IP65 waterproof, heat-resistant, and frost-resistant, designed to withstand various outdoor weather conditions. However, extreme conditions may temporarily affect performance.
Image: The Lepro WL5000 is IP65 waterproof, heat-resistant, and frost-resistant for all-weather durability.
6. Dépannage
If your Lepro WL5000 solar light is not functioning as expected, please refer to the following common issues and solutions:
- La lumière ne s'allume pas la nuit :
- Ensure the power switch on the back of the light unit is in the 'ON' position.
- Verify the solar panel is receiving sufficient direct sunlight for at least 8 hours during the day. Relocate the panel if necessary.
- Check the connection cable between the solar panel and the light unit for proper connection and any damage.
- Confirm there are no external light sources (e.g., streetlights, other outdoor lights) near the motion sensor that might prevent it from activating.
- La lumière est faible ou ne reste allumée que peu de temps :
- La batterie n'est peut-être pas complètement chargée. Assurez-vous que le panneau solaire est propre et exposé à la lumière directe du soleil pendant une journée complète.
- Consider environmental factors such as cloudy weather or shorter daylight hours, which can reduce charging efficiency.
- Le capteur de mouvement ne détecte aucun mouvement :
- Assurez-vous que la lentille du détecteur de mouvement est propre et dégagée.
- Verify the light unit is installed within the recommended height range (1.5-3.5m / 5-12ft).
- Test the sensor by walking across its detection path, not directly towards it.
If these steps do not resolve the issue, please contact Lepro customer support for further assistance.
7. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | Lépreux |
| Numéro de modèle | PR640004-DW-2 (WL5000) |
| Type de source lumineuse | LED (72 LED) |
| Luminosité | 1000 lumens |
| Température de couleur | 6500 Kelvin (blanc lumière du jour) |
| Quoitage | 14 watts |
| Voltage | 120 volts |
| Angle d'éclairage | 270° Wide Lighting Angle (3 adjustable heads) |
| Angle de détection du capteur de mouvement | 120° |
| Distance de détection du capteur de mouvement | 16 à 26 pieds (5 à 8 m) |
| Niveau de résistance à l'eau | Étanchéité IP65 |
| Matériel | GPPS+ABS (Plastic) |
| Source d'énergie | Alimentation solaire |
| Dimensions du produit | 8.66"L x 5.12"l x 8.66"H |
| Poids de l'article | 2.05 livres |
| Type de batterie | 2 Lithium Ion batteries (internal, not user-replaceable) |
| Durée de vie moyenne de la batterie | 12 mois (estimation) |
| Quantité du paquet d'articles | 2 |
| Première date disponible | 17 juin 2021 |
8. Garantie et assistance
The Lepro WL5000 Solar Motion Sensor Security Light comes with a 12-month after-sales service warranty À compter de la date d'achat, cette garantie couvre les défauts de fabrication et les problèmes résultant d'une utilisation normale.
For warranty claims, technical support, or any questions regarding your product, please contact Lepro customer service. Have your purchase details and model number (WL5000 or PR640004-DW-2) ready when contacting support.
Contact information can typically be found on the product packaging or the official Lepro website.
